HPE Aruba SFP-GEB-T-IL Compatible LINK-PP 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Industrial Transceiver Module The HPE Aruba SFP-GEB-T-IL Compatible LINK-PP module is a high-performance, industrial-grade copper SFP transceiver operating over an SGMII interface. Powered by the Realtek RTL8213B chip, it supports 10/100/1000Mbps auto-negotiation and delivers reliable full-duplex links up to 100 meters over Category 5 UTP cabling. It features integrated Tx-disable and Rx_los functions as standard. HPE Aruba Part NumberSFP-GEB-T-ILVendor NameLINK-PP Part Status Active

HPE Aruba SFP-GEB-T-IL Compatible LINK-PP 10/100/1000BASE-T SFP Specifications The HPE Aruba SFP-GEB-T-IL Compatible LINK-PP module is a high-performance, industrial-grade copper SFP transceiver operating over an SGMII interface. Powered by the Realtek RTL8213B chip, it supports 10/100/1000Mbps auto-negotiation and delivers reliable full-duplex links up to 100 meters over Category 5 UTP cabling. It features integrated Tx-disable and Rx_los functions as standard. HPE Aruba Part NumberSFP-GEB-T-ILVendor NameLINK-PP Part Status Active Form Factor SFP SGMII Max.

HPE Aruba S4B38A Compatible LINK-PP 400G QSFP-DD ZR Multi-Rate Digial Coherent Optical Transceiver (SMF, 1528.77~1566.52nm, ≤120km, Duplex LC, DOM) The HPE Aruba S4B38A Compatible LINK-PP QSFP-DD ZR+ modules are low power consumption multi-rate and interoperable coher-ent optical transceivers, which can be plugged into various routing, switching, and optical transport host platforms.QSFP-DD ZR+ modules support a total capacity of 25.6Tbit/s through 75 GHz- spaced DWDM within C-band. They are compliant with Open ZR+ MSA technical spec- ifications. Digital diagnostics

HPE Aruba J9151E Compatible LINK-PP 10G SFP+ Specifications The HPE Aruba J9151E Compatible LINK-PP module is a high-performance 10Gbps SFP+ optical transceiver engineered for long-reach data transmission up to 10 kilometers over Single-Mode Fiber (SMF). It operates at a 1310nm wavelength using a Duplex LC connector and features Digital Optical Monitoring (DOM) to provide real-time diagnostic data for optimal network management. HPE Aruba Part NumberJ9151EVendor NameLINK-PP Part Status Active Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1310nm

HPE Aruba R0R40A Compatible LINK-PP 100G SWDM4 QSFP28 BiDi 4 x 25G NRZ Transceiver Module (MMF, 850/880/910/940nm, 100m, LC, DOM) The HPE Aruba R0R40A Compatible LINK-PP 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. HPE Aruba Part NumberR0R40AVendor NameLINK-PP Form Factor QSFP28 Max Data Rate 103.1Gbps Wavelength 850/8

HPE Aruba QSFP-4W10-100G Compatible LINK-PP 100G QSFP28 CWDM Optical Transceiver Module (SMF, 1271nm, 1291nm, 1311nm and 1331nm, 10km, LC, DOM) The HPE Aruba QSFP-4W10-100G Compatible LINK-PP 100G QSFP CWDM4 Transceiver is designed for 10km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. HPE Aruba Part NumberQSFP-4W10-100GVendor NameLINK-PP

HPE Aruba QDD-XDR4-400G Compatible LINK-PP 400GBASE-XDR4 QSFP-DD 8 x 50G PAM4 Transceiver Module (SMF,1310nm,2km,MPO-12/APC,DOM) The HPE Aruba QDD-XDR4-400G Compatible LINK-PP 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-FR-100G. HPE Aruba Part NumberQDD-XDR4-400GVendor NameLINK-PP Form Factor QSFP-DD Max

HPE Aruba S3N94A Compatible LINK-PP 400G-PLR4 QSFP-DD 8 x 50G PAM4 Transceiver Module (SMF,1310nm,10km,MPO-12/APC,DDM) The HPE Aruba S3N94A Compatible LINK-PP module is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 10km optical communication applications. The product is designed with form factor,optical/electrical connection and digital diagnostic interface according to the QSFP-DD Multi- Source Agreement(MSA). HPE Aruba Part NumberS3N94AVendor NameLINK-PP Form Factor QSFP-DD Max Data Rate 425Gbps (4x 106.25Gbps)

HPE Aruba S1D18A Compatible LINK-PP 400G QSFP-DD 8 x 50G PAM4 Transceiver Module (MMF, 850nm, 100m, MPO-16/APC, DOM) The HPE Aruba S1D18A Compatible LINK-PP module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are

HPE Aruba QDD-SR4-400G Compatible LINK-PP 400GBASE-SR4 QSFP-DD 8 x 50G PAM4 Transceiver Module (MMF, 850nm, 50m, MTP/MPO-12, DOM) The HPE Aruba QDD-SR4-400G Compatible LINK-PP module is a four-Channel, Parallel, Pluggable, Fiber-Optic QSFP-DD Module for 400Gigabit Ethernet applications. This product converts 8 channels of 26.5625GBd electrical input data to 4 channels of 53.125GBd parallel optical signals. Reversely, on the receiver side, 4 channels of parallel optical signals of 53.125GBd converts to 8 channels of 26.5625GBd electrical output data. This module is designed to operate

HPE Aruba SFP-GEB-T-IL Compatible LINK-PP 10/100/1000BASE-T SFP Specifications SFP-GEB-T-IL is an industrial-grade 10/100/1000BASE-T SFP copper transceiver module that features low power consumption, a fully metallic enclosure to reduce EMI, and a 100-meter transmission range over Cat 5 cable in extreme temperatures from -40°C to +85°C. HPE Aruba Part NumberSFP-GEB-T-ILVendor NameLINK-PP Part Status Active Form Factor SFP SGMII Max. Data Rate 1.25G Max. Cable Distance 100m Media Cat 5 Connector RJ-45 RX_LOS Yes DOM Support No

HPE Aruba SFP-GEB-T-IL Compatible LINK-PP 10/100/1000BASE-T SFP Specifications SFP-GEB-T-IL acts as an industrial-grade 10/100/1000BASE-T SFP copper module engineered for extreme environments, sustaining deterministic network links up to 100m over Category 5 twisted-pair cabling while effortlessly adapting to diverse host systems via its dual-architecture support for SERDES (at native 1000BASE-T) and SGMII (at 10/100/1000Mbps multi-rate compliance) across an operating temperature spectrum of -40°C to +85°C. HPE Aruba Part NumberSFP-GEB-T-ILVendor NameLINK-PP

HPE Aruba J8177D Compatible LINK-PP 1000BASE-T SFP Specifications J8177D is a commercial-grade 1000BASE-T copper SFP transceiver module engineered for efficient gigabit connectivity up to 100m over Cat 5 cabling, featuring a compact RJ-45 connector and an eco-conscious design that draws a typical low power dissipation of just 1.05W while housing its circuitry in a fully metallic enclosure to guarantee low electromagnetic interference across its 0°C to 70°C operating temperature range. HPE Aruba Part NumberJ8177DVendor NameLINK-PP Part Status Active Form

HPE Aruba QSFP-SR4-40G-I Compatible LINK-PP 40G QSFP+ Specifications The HPE Aruba QSFP-SR4-40G-I Compatible LINK-PP module is a high-performance 40G QSFP+ transceiver designed for robust industrial-grade networking. Operating at an 850nm wavelength over multimode fiber, this premium optical module delivers exceptional data rates up to 300m. Engineered with a reliable MPO interface, it ensures seamless integration and high-speed connectivity for demanding data center environments. HPE Aruba Part NumberQSFP-SR4-40G-IVendor NameLINK-PP Form Factor QSFP+ Max Data

HPE Aruba QSFP-BX10-100G Compatible LINK-PP 100G BiDi QSFP28 Specifications The HPE Aruba QSFP-BX10-100G Compatible LINK-PP module is a high-performance 100G QSFP28 BiDi optical transceiver engineered for robust data center interconnects. This simplex LC module features an advanced EML laser and PIN receiver, utilizing PAM4 modulation to achieve a 106.25Gb/s lane signaling rate. It strictly complies with 100G Lambda MSA specifications and standard IEEE network protocols. HPE Aruba Part NumberQSFP-BX10-100GVendor NameLINK-PP Form Factor QSFP28 Max Data Rate

HPE Aruba QSFP-BX20-100G Compatible LINK-PP 100G QSFP28 Specifications The HPE Aruba QSFP-BX20-100G Compatible LINK-PP module is a high-performance 100G BiDi QSFP28 optical transceiver designed for efficient single-fiber bidirectional networking. It features a 106.25Gb/s PAM4 optical signal rate alongside a 4x25.78Gb/s NRZ CAUI-4 electrical interface. With integrated KP4 FEC and a low power consumption of under 4W, this commercial-grade module ensures exceptional stability for high-density architectures. HPE Aruba Part NumberQSFP-BX20-100GVendor NameLINK-PP Form