Cisco QSFP-40/100-SRBD Compatible LINK-PP 40/100G SWDM4 QSFP28 BIDI Dual Rate 4 x 25G NRZ 850/880/910/940nm 100m Duplex LC MMF Transceiver Module The Cisco QSFP-40/100-SRBD Compatible LINK-PP module is a Four-Channel,Pluggable, LC Duplex, Fiber-Optic QSFP+ Transceiver for 100 Gigabit Ethernet Applications.This transceiver is a high performance module for short-range duplex data communication and interconnect applications. It integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 25.781

Cisco QSFP-100G-SR1.2 Compatible LINK-PP 100G QSFP28 BiDi 4 x 25G NRZ Transceiver Module (MMF, 850/910nm, 100m, LC, DOM) The Cisco QSFP-100G-SR1.2 Compatible LINK-PP QSFP28-100G-SR-BD optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE802.3cm-2020 and CAUI-4(no FEC)1.Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. The module incorporates 2 channels 850nm/910nm VCSEL and PIN photo detector, transmitting and receiving each optically over

Cisco QSFP-BIDI-100G Compatible LINK-PP 100G SWDM4 QSFP28 BiDi 4 x 25G NRZ Transceiver Module (MMF, 850/880/910/940nm, 100m, LC, DOM) The Cisco QSFP-BIDI-100G Compatible LINK-PP 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. Cisco Part NumberQSFP-BIDI-100GVendor NameLINK-PP Form Factor QSFP28 Max Data Rate 103.1Gbps

Cisco QSFP-100/112G-ER4 Compatible LINK-PP 100GBASE-ER4 and 112G OTU4 QSFP28 Dual Rate Duplex LC/UPC  Optical Transceiver Module(SMF, 1310nm, 40km, LC, DOM) Cisco Part NumberQSFP-100/112G-ER4Vendor NameLINK-PP Form Factor QSFP28 Max Data Rate Dual Rate 103.1Gbps and 112Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type 4 x LAN WDM DML TOSA Receiver Type 4 x PIN ROSA DDM/DOM  Supported Commercial Temperature Range 0°C to +70°C Protocols  100G Ethernet, 100G Telecom

Cisco QSFP-100G-4WDM-S Compatible LINK-PP 100G QSFP28 CWDM Optical Transceiver Module (SMF, 1271nm, 1291nm, 1311nm and 1331nm, 10km, LC, DOM) The Cisco QSFP-100G-4WDM-S Compatible LINK-PP 100G QSFP CWDM4 Transceiver is designed for 10km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Cisco Part NumberQSFP-100G-4WDM-SVendor NameLINK-PP

Cisco QSFP-LR4-100GM Compatible LINK-PP 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)   The Cisco QSFP-LR4-100GM Compatible LINK-PP 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode

Cisco QSFP-BX10-100G Compatible LINK-PP 100G QSFP28 BiDi 4 x 25G NRZ  Optical Transceiver Module (SMF, 1331nm-TX/1271nm-RX,10km, LC, DOM) The Cisco QSFP-BX10-100G Compatible LINK-PP QSFP28 transceiver module adopts a lane signaling rate of 106.25Gb/s based on PAM4 modulation, supporting a maximum transmission distance of 10km over single-mode fiber (SMF); it is equipped with an EML laser and PIN receiver, features a 4×25.78Gb/s NRZ electrical interface compliant with CAUI-4 standard, integrates internal KP4 FEC function and high-speed I/O electrical interface, comes with an

Cisco QSFP-BX10-100G Compatible LINK-PP 100G QSFP28 BiDi 4 x 25G NRZ  Optical Transceiver Module for Ethernet and Data Center (SMF, 1271nm-TX/1331nm-RX,10km, LC, DOM) The Cisco QSFP-BX10-100G Compatible LINK-PP QSFP28 transceiver module adopts a lane signaling rate of 106.25Gb/s based on PAM4 modulation, supporting a maximum transmission distance of 10km over single-mode fiber (SMF); it is equipped with an EML laser and PIN receiver, features a 4×25.78Gb/s NRZ electrical interface compliant with CAUI-4 standard, integrates internal KP4 FEC function and high-speed I/O

Cisco QSFP-BX20-100G Compatible LINK-PP 100G QSFP28 BiDi 20km Optical Transceiver Module for Ethernet and Data Center (SMF, 1311nm-TX/1291nm-RX, LC, DOM)   The Cisco QSFP-BX20-100G Compatible LINK-PP adopts the QSFP28 MSA package with simplex LC connector, featuring a lane signaling rate of 106.25Gb/s via PAM4 modulation and a 4×25.78Gb/s NRZ electrical CAUI-4 interface with high-speed I/O, integrated KP4 FEC inside the module, an EML laser paired with a PIN receiver enabling up to 20km transmission over single-mode fiber (SMF), as well as an I2C interface supporting built-in

Cisco QSFP-BX20-100G Compatible LINK-PP 100G QSFP28 BiDi 20km Optical Transceiver Module for Ethernet and Data Center (SMF, 1291nm-TX/1311nm-RX, LC, DOM)   The Cisco QSFP-BX20-100G Compatible LINK-PP adopts the QSFP28 MSA package with simplex LC connector, featuring a lane signaling rate of 106.25Gb/s via PAM4 modulation and a 4×25.78Gb/s NRZ electrical CAUI-4 interface with high-speed I/O, integrated KP4 FEC inside the module, an EML laser paired with a PIN receiver enabling up to 20km transmission over single-mode fiber (SMF), as well as an I2C interface supporting built-in

Cisco QSFP-BX40-100G Compatible LINK-PP 100G QSFP28 BiDi 4 x 25G NRZ Optical Transceiver Module (SMF, 1309.14nm-TX/1304.58nm-RX, 40km, LC, DOM) The LINK-PP LQ-BLA100-ER1C module supports 100GBASE-ER BIDI transmission, featuring a lane signaling rate of 106.25 Gb/s over PAM4 modulation and enabling a maximum 40km reach over single-mode fiber (SMF). It adopts EML TOSA and APD ROSA optical components, equipped with a high-speed 4×25.78Gb/s NRZ electrical interface complying with CAUI-4 standards, and comes with an I2C interface supporting integrated digital diagnostic monitoring.

Cisco QSFP-BX40-100G Compatible LINK-PP 100G QSFP28 BiDi Optical Transceiver Module for Ethernet and Data Center (SMF, 1304.58nm-TX/1309.14nm-RX, 40km, LC, DOM) The Cisco QSFP-BX40-100G Compatible LINK-PP module supports 100GBASE-ER BIDI transmission, featuring a lane signaling rate of 106.25 Gb/s over PAM4 modulation and enabling a maximum 40km reach over single-mode fiber (SMF). It adopts EML TOSA and APD ROSA optical components, equipped with a high-speed 4×25.78Gb/s NRZ electrical interface complying with CAUI-4 standards, and comes with an I2C interface supporting integrated

Cisco QSFP-PLR4L-100G Compatible LINK-PP 100G QSFP28 4 x 25G NRZ Optical Transceiver Module (SMF, 1310nm, 2km, MPO-12/APC, DOM) The LINK-PP LQ-M31100-FR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 Transceiver for 100G Receiver Applications. The QSFP28 full-duplex optical module offers4 independent receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 2km using single mode fiber. An optical fiber ribbon cable with an MPO/MTP TM connector can be plugged into the QSFP28 module receptacle. QSFP28 PSM4 is one kind of parallel Receiver

Cisco QSFP-4W20-100G-I Compatible LINK-PP 100G QSFP28 Specifications The Cisco QSFP-4W20-100G-I Compatible LINK-PP module is an industrial-grade 100G QSFP28 LR4 transceiver utilizing LAN-WDM technology to transmit data over single-mode fiber up to 20km. Operating at a 1310nm Central wavelength with a duplex LC interface, it integrates Digital Diagnostics Monitoring for real-time performance tracking in harsh environmental conditions. Cisco Part NumberQSFP-4W20-100G-IVendor NameLINK-PP Form Factor QSFP28 Max Data Rate 100Gbps Max Wavelength 1310nm Max Cable

Cisco QSFP-ZR4-100G-I Compatible LINK-PP 100G QSFP28 Specifications The Cisco QSFP-ZR4-100G-I Compatible LINK-PP module is an industrial-grade QSFP28 80km transceiver engineered for high-capacity single-mode fiber networks. It leverages advanced LAN-WDM technology and an integrated SOA to deliver reliable data transmission over a QSFP28 80km reach in extreme environments ranging from -40°C to +85°C. Built-in DDM capabilities ensure continuous, real-time performance monitoring for mission-critical infrastructure. Cisco Part NumberQSFP-ZR4-100G-IVendor

Cisco QSFP-EZR4-100G Compatible LINK-PP 100G QSFP28 4x25G NRZ Optical Transceiver Module(SMF, 1310nm, 100km, LC, DOM) The Cisco QSFP-EZR4-100G Compatible LINK-PP module is designed for 100km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial interface. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. Cisco Part NumberQSFP-EZR4-100GVendor NameLINK-PP Form Factor QSFP28 Max Data