H3C Compatible LINK-PP LQ-LW100-ER4C 100G ZR4 QSFP28 Duplex LC Optical Transceiver Module (SMF, 1310nm, 80km, DOM)LINK-PP LQ-LW100-ER4C QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 80km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C Vendor Name LINK-PP Form Factor QSFP28

Generic Compatible LINK-PP LQ-LW100-ER4C 100G ZR4 QSFP28 Duplex LC Optical Transceiver Module (SMF, 1310nm, 80km, DOM)LINK-PP LQ-LW100-ER4C QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 80km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C Vendor Name LINK-PP Form Factor QSFP2

LINK-PP LQ-LW100-ER4C 100G ZR4 QSFP28 Duplex LC Optical Transceiver Module (SMF, 1310nm, 80km, DOM)LINK-PP LQ-LW100-ER4C QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 80km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C Vendor Name LINK-PP Form Factor QSFP28 Max

LINK-PP LP-RJ45TG-8YC 10GBase-T SFP+ Transceiver Module(Copper, 80m, RJ45)LP-RJ45TG-8YC Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 80 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol. LINK-PP Part Number LP-RJ45

LINK-PP LP-RJ45TG-3YC 10GBase-T SFP+ Transceiver Module(Copper, 30m, RJ-45)LP-RJ45TG-3YC Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . This SFP+ transceiver provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector,They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T /1000base-T/100base-Tx / 10base-Te standards as specified in IEEE Std 802.3 . LINK-PP Part Number LP-RJ45TG-3YC Vendor Name LINK-PP Part Status

Generic 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Vendor Name LINK-PP Form Factor QSFP28

HPE Aruba 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Vendor Name LINK-PP Form Factor

LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number: LQ-CW100-FR4C Vendor Name LINK-PP Form Factor QSFP28 Max

HPE Aruba 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC Compatible LINK-PP LQ-CW40-LR4C（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Vendor Name LINK-PP Form Factor QSFP+ Max Data Rate

Dell 400GBASE-LR4 PAM4 QSFP-DD DOM Duplex LC Optical Transceiver Modules Compatible LINK-PP LQD-CW400-LR4C（SMF,400G,1310nm,10km）LQD-CW400-LR4C is a transceiver module designed for 10km optical communication applications, and it is compliant to 100G Lambda MSA standard. This module can convert 8-channel 53.125Gb/s electrical data to 4- channel 106.25Gb/s optical signals, and multiplex them into a single channel for 425Gb/s optical transmission. LINK-PP Part Number: LQD-CW400-LR4C Vendor Name LINK-PP

Generic Compatible LINK-PP LQD-CW400-LR4C 400GBASE-LR4 PAM4 QSFP-DD DOM Duplex LC Optical Transceiver Modules（SMF,400G,1310nm,10km）LQD-CW400-LR4C is a transceiver module designed for 10km optical communication applications, and it is compliant to 100G Lambda MSA standard. This module can convert 8-channel 53.125Gb/s electrical data to 4- channel 106.25Gb/s optical signals, and multiplex them into a single channel for 425Gb/s optical transmission. LINK-PP Part Number: LQD-CW400-LR4C Vendor Name LINK-PP

Dell Networking Compatible LINK-PP LQD-CW400-FR4C 400GBASE-FR4 QSFP-DD 1310nm 2km DOM Duplex LC SMF Optical Transceiver Module（SMF,400G,1310nm,2km, LC, DOM）LQD-CW400-FR4C is a transceiver module designed for 2km optical communication applications, and it is compliant to 100G Lambda MSA standard. This module can convert 8-channel 53.125Gb/s electrical data to 4- channel 106.25Gb/s optical signals, and multiplex them into a single channel for 425Gb/s optical transmission. LINK-PP Part Number: LQD-CW400-FR4C Vendor Name LINK-PP

LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate 100Gbps

LINK-PP LQ-CW40-LR4C 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Vendor Name LINK-PP Form Factor QSFP+ Max Data Rate 40Gbps

LINK-PP LQD-CW400-LR4C 400GBASE-LR4 PAM4 QSFP-DD DOM Duplex LC Optical Transceiver Modules（SMF,400G,1310nm,10km）LQD-CW400-LR4C is a transceiver module designed for 10km optical communication applications, and it is compliant to 100G Lambda MSA standard. This module can convert 8-channel 53.125Gb/s electrical data to 4- channel 106.25Gb/s optical signals, and multiplex them into a single channel for 425Gb/s optical transmission. LINK-PP Part Number: LQD-CW400-LR4C Vendor Name LINK-PP Max Data Rate

LINK-PP LQD-CW400-FR4C QSFP-DD FR4 SMF Optical Transceiver Module （400G,1310nm,2km）LQD-CW400-FR4C is a transceiver module designed for 2km optical communication applications, and it is compliant to 100G Lambda MSA standard. This module can convert 8-channel 53.125Gb/s electrical data to 4- channel 106.25Gb/s optical signals, and multiplex them into a single channel for 425Gb/s optical transmission. LINK-PP Part Number: LQD-CW400-FR4C Vendor Name LINK-PP Form Factor QSFP-DD Max