What is the maximum transmission distance of the 813874-B22?

It supports link lengths up to 80 meters over standard Cat6a or Cat7 copper cabling at 10 Gbps.

What cable type is required for maximum reach?

Cat6a or Cat7 shielded twisted-pair (STP) cabling is recommended to achieve the full 80-meter distance.

What is the connector type of this transceiver?

It is equipped with a standard RJ45 interface for easy integration with standard Ethernet patch cords.

Is it compatible with third-party network hardware?

Yes, it undergoes rigorous interoperability testing to ensure seamless compatibility with major switch and router brands.

The description says up to 80 meters transmission range. Is that distance achievable on standard unshielded Cat6 cables, or is it mandatory to use Cat6a / Cat7 shielded wires to get full 10Gbps throughput without packet drops at 80m?

To achieve the maximum extended transmission distance of 80 meters at full 10Gbps data transfer rates, Cat6a or Cat7 twisted-pair cabling is highly recommended. Standard Cat6 cabling can typically only handle 10G bandwidth safely up to 35-50 meters due to crosstalk and signal attenuation. For clean, low-latency, and error-free 80-meter runs, using high-quality Cat6a or Cat7 structured cabling is the best practice.

Our procurement department needs to source around 120 units of these 10GBASE-T SFP+ RJ45 80m transceivers for a new university campus fiber-to-copper infrastructure upgrade. Do you guys offer tiered B2B wholesale pricing or special discount codes for bulk orders? What’s the typical lead time for shipping to a warehouse in Germany?

Thank you for reaching out! Yes, we offer highly competitive volume discounts for enterprise procurement and batch orders. For a batch of 120 units, our B2B sales team can provide an exclusive quote and expedite processing. We maintain a large volume of stock (typically 5000+ units ready), so your order can be dispatched via express courier (DHL/FedEx) within 1-2 business days, reaching Germany in approximately 4-6 tracking days.

Hey team, we are planning a large scale roll-out across a mixed rack environment. Will this LP-RJ45TG-8YC module work smoothly if I plug it into a Cisco Nexus 9K on one side, and a Netgear or Ubiquiti switch on the other? Also, does this copper version support real-time DDM/DOM monitoring for tracking operating temperature and voltage inside the interface?

Yes, absolutely. The LINK-PP LP-RJ45TG-8YC is engineered with broad OEM compatibility and can seamlessly bridge connections between Cisco, Netgear, Ubiquiti, and multi-vendor systems without configuration issues. Regarding DDM/DOM: please note that standard 10GBASE-T copper SFP+ modules generally do not report typical optical metrics (like optical TX/RX power) due to the nature of copper PHY chips, but the module is fully optimized for intelligent power consumption and thermal dissipation to ensure stable high-speed enterprise networks performance.

We need to deploy some 10G copper links in uncooled outdoor telecom cabinets for base station backhaul links. Summers here easily hit 45°C inside the enclosure. Can this specific module handle extreme ambient heat, or do you have an industrial-grade wide temperature version (like -40°C to 85°C) available for rugged environments?

Great question! The standard LP-RJ45TG-8YC listed here is a commercial-grade design rated for stable indoor data center environments. However, for harsh outdoor cabinets or base station backhaul deployment, we absolutely provide customized Industrial-grade (-40°C to +85°C) versions built with ruggedized copper PHY transceivers. Please contact our support team directly before placing your order so we can match the exact industrial spec you need!

Breadcrumb: Home; Products; Optics Transceivers | SFP Modules; 10/25/40G/100G Transceiver Modules; 10G SFP+; 224278

Click to open expanded view

BladeSystem 813874-B22 Compatible LINK-PP 10GBASE-T SFP+ Copper 80m RJ-45 Transceiver Module

Name: BladeSystem 813874-B22 Compatible LINK-PP 10GBASE-T SFP+ Copper 80m RJ-45 Transceiver Module
Brand: LINK-PP
SKU: 224278
Price: 43.86 USD
Availability: InStock
Rating: 5 (28 reviews)

# 224278

Product: BladeSystem 813874-B22 Compatible LINK-PP 10GBASE-T SFP+ Copper 80m RJ-45 Transceiver Module
SKU: 224278
P/N: LP-RJ45TG-8YC
Price: $ 51
Stock: 5298 in Stock
Sold: 5.4K
Product URL: https://www.l-p.com/products/493903.htm

For Order Over $1000 Get $15.00 Off , Code: Linkpp15

For Order Over $3000 Get $50.00 Off , Code: Linkpp50

For Order Over $5000 Get $100.00 Off , Code: Linkpp100

New Users: $10 Coupon for Orders , Code: linkpp2610

28 Reviews

4 Questions

Request Stock

5.4K Sold

$ 51

Free shipping over $600, If you need a more favorable price, please contact us directly.

Qty (pcs) :

Unit Price :

$ 51

100

$ 48.45

1000

$ 46.92

3000

$ 45.39

6000

$ 43.86

Manufacture: LINK-PP

P/N: LP-RJ45TG-8YC

Compatible:: Cisco; LINK-PP; Arista; Aruba; BladeSystem; Broadcom; Dell; Extreme; FS; Generic; H3C; Intel; Juniper; Mellanox; MikroTik; Netgear; Palo Alto

Compatible P/N:: 813874-B22 | 80m

Shipping:

To Be Negotiated

Free Shipping

Can't deliver

to United States via {{now_chooseship?now_chooseship.name:''}}

Estimated delivery time : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} days. See details

5-Year Warranty 30-Day Returns 30-Day Exchange

Stock:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantity:

( Min. Order {{detail_data.prodInfo.minimum_ordered_quantity}} )

undeliverable

Total Price:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Add to wish

Specifications

Specification
Videos
Matching Products
Download
Q&A
Customer Reviews

BladeSystem 813874-B22 Compatible LINK-PP 10GBASE-T SFP+ Specifications

The BladeSystem 813874-B22 Compatible LINK-PP module is a high-performance 10GBASE-T SFP+ copper transceiver engineered for demanding network links. It delivers data transfer rates up to 10Gbps over standard Cat6a/Cat7 twisted-pair cabling, extending transmission distances up to 80 meters. This hot-pluggable module ensures energy-efficient, low-latency connectivity, providing an ideal, cost-effective solution for enterprise data centers and high-speed enterprise networks.

BladeSystem Part Number	813874-B22	Vendor Name	LINK-PP
Part Status	Active	Form Factor	SFP+
Max Data Rate	10Gbps	Cable Distance	80m@Cat6a/Cat7 or Better
Connector	RJ-45	Cable Type	Copper
RX_LOS	Yes	Operating Temperature Range	0°C to +70°C
EMC (Electro Magnetic Compatibility)	Supported	Protocols	IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431

Videos

Matching Products

Pictures

ID#

Description

Price

Stock

Add to Cart

Download

Product Drawing

PDF
LP-RJ45TG-8YC.pdf

Questions & Answers
Ask a Question

No data

Q: The description says up to 80 meters transmission range. Is that distance achievable on standard unshielded Cat6 cables, or is it mandatory to use Cat6a / Cat7 shielded wires to get full 10Gbps throughput without packet drops at 80m? By D***s on 2025-10-29

A: Hello! To achieve the maximum extended transmission distance of 80 meters at full 10Gbps data transfer rates, Cat6a or Cat7 twisted-pair cabling is highly recommended. Standard Cat6 cabling can typically only handle 10G bandwidth safely up to 35-50 meters due to crosstalk and signal attenuation. For clean, low-latency, and error-free 80-meter runs, using high-quality Cat6a or Cat7 structured cabling is the best practice. By admin on 2025-10-29
Q: Our procurement department needs to source around 120 units of these 10GBASE-T SFP+ RJ45 80m transceivers for a new university campus fiber-to-copper infrastructure upgrade. Do you guys offer tiered B2B wholesale pricing or special discount codes for bulk orders? What’s the typical lead time for shipping to a warehouse in Germany? By N***n on 2025-09-08

A: Thank you for reaching out! Yes, we offer highly competitive volume discounts for enterprise procurement and batch orders. For a batch of 120 units, our B2B sales team can provide an exclusive quote and expedite processing. We maintain a large volume of stock (typically 5000+ units ready), so your order can be dispatched via express courier (DHL/FedEx) within 1-2 business days, reaching Germany in approximately 4-6 tracking days. By admin on 2025-09-08
Q: Hey team, we are planning a large scale roll-out across a mixed rack environment. Will this LP-RJ45TG-8YC module work smoothly if I plug it into a Cisco Nexus 9K on one side, and a Netgear or Ubiquiti switch on the other? Also, does this copper version support real-time DDM/DOM monitoring for tracking operating temperature and voltage inside the interface? By B***t on 2025-04-02

A: Hi there! Yes, absolutely. The LINK-PP LP-RJ45TG-8YC is engineered with broad OEM compatibility and can seamlessly bridge connections between Cisco, Netgear, Ubiquiti, and multi-vendor systems without configuration issues. Regarding DDM/DOM: please note that standard 10GBASE-T copper SFP+ modules generally do not report typical optical metrics (like optical TX/RX power) due to the nature of copper PHY chips, but the module is fully optimized for intelligent power consumption and thermal dissipation to ensure stable high-speed enterprise networks performance. By admin on 2025-04-03
Q: We need to deploy some 10G copper links in uncooled outdoor telecom cabinets for base station backhaul links. Summers here easily hit 45°C inside the enclosure. Can this specific module handle extreme ambient heat, or do you have an industrial-grade wide temperature version (like -40°C to 85°C) available for rugged environments? By M***s on 2025-03-04

A: Great question! The standard LP-RJ45TG-8YC listed here is a commercial-grade design rated for stable indoor data center environments. However, for harsh outdoor cabinets or base station backhaul deployment, we absolutely provide customized Industrial-grade (-40°C to +85°C) versions built with ruggedized copper PHY transceivers. Please contact our support team directly before placing your order so we can match the exact industrial spec you need! By admin on 2025-03-04

Customer Reviews
Write a Review

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

All Reviews ({{comment.star_num?comment.star_num:comment.count}})

All Reviews

5 stars only

4 stars only

3 stars only

2 stars only

1 star only
Reviews with Pictures ( {{comment.pic_comment}} )
See All Reviews

No data

L***n

Netherlands

Verified Purchase

5 .0

2025-11-30

We deployed 50 units for our enterprise data centers expansion over standard Cat7 twisted-pair cabling. The 80 meters extended transmission range is verified, maintaining rock-solid low-latency 10Gbps data transfer rates.

189 Helpful vote Comments

L***n

Ukraine

Verified Purchase

5 .0

2025-11-25

Awesome hot-pluggable module. Solved our short-run copper patching issue instantly. Very energy-efficient design.

73 Helpful vote Comments

B***r

Costa Rica

Verified Purchase

5 .0

2025-07-03

Incredibly stable 10Gbps throughput over our 70-meter Cat7 campus network setup. Zero packet loss.

151 Helpful vote Comments

J***n

Peru

Verified Purchase

5 .0

2025-05-24

Best budget 10GBASE-T SFP+ copper module.

39 Helpful vote Comments

D***r

Malaysia

Verified Purchase

5 .0

2025-04-16

Excellent RJ45 transceiver. Massively deployed these in our server rooms with zero compatibility complaints.

157 Helpful vote Comments

T***t

Greece

Verified Purchase

4 .0

2025-03-14

The RJ-45 transceivers work perfectly, but the external retail boxes arrived slightly squashed.

115 Helpful vote Comments

S***l

Chile

Verified Purchase

5 .0

2025-01-04

Cat6a enterprise data centers deployment complete.

44 Helpful vote Comments

J***z

Thailand

Verified Purchase

5 .0

2024-12-26

Great SFP-10G-T module alternative, but the pull-tab lever feels a bit stiff initially.

42 Helpful vote Comments

C***a

Russian Federation

Verified Purchase

5 .0

2024-06-20

Outstanding LP-RJ45TG-8YC modules for datacenter maintenance. Fully compatible with our multi-vendor setup including Cisco SFP-10G-T-80 and Mikrotik SFP-XG-T80 switches. They run surprisingly cool for high-performance copper transceivers.

65 Helpful vote Comments

J***g

Canada

Verified Purchase

5 .0

2024-05-12

Using this for base station backhaul testing. Excellent transmission range and solid RJ-45 connection.

75 Helpful vote Comments

M***n

Republic of Korea

Verified Purchase

5 .0

2024-03-07

Perfect for my home 10G NAS!

64 Helpful vote Comments

P***k

Czech Republic

Verified Purchase

5 .0

2024-02-03

Hot-pluggable, recognized instantly. Zero hassle!

52 Helpful vote Comments

O***z

United Kingdom

Verified Purchase

5 .0

2023-10-26

Would definitely recommend them to my friends and family for their excellent service and good 10/25/40G Transceiver Modules.

45 Helpful vote Comments

Z***n

United States

Verified Purchase

5 .0

2023-10-20

Thanks for quick service. We will be back!

43 Helpful vote Comments

M***g

Canada

Verified Purchase

5 .0

2023-08-26

Perfect. Order arrived as expected in proper packaging.

51 Helpful vote Comments

J***n

United States

Verified Purchase

5 .0

2023-07-18

Always have a wide selection of Optical Transceivers at good prices generally.

22 Helpful vote Comments

S***c

Macao

Verified Purchase

5 .0

2023-07-09

All good well packaged and delivered quality product for great price.

44 Helpful vote Comments

J***l

Belarus

Verified Purchase

5 .0

2023-05-05

My PCB can accept it very well and work perfectly. A painless experience - easy to find the items, easy to order it, and well packed and shipped.

41 Helpful vote Comments

B***s

United States

Verified Purchase

5 .0

2022-11-01

placed my order, made my payment, but it was was shipped slowly.

99 Helpful vote Comments

S***a

United States

Verified Purchase

5 .0

2022-09-14

Excellent service, product works and delivery was on time.

47 Helpful vote Comments

S***g

Bangladesh

Verified Purchase

5 .0

2022-09-03

they have the best prices and the quickest delivery

49 Helpful vote Comments

N***a

Bangladesh

Verified Purchase

5 .0

2022-08-21

These Sfp Cage are working without any compatibility issues, they deserve the high prices.

50 Helpful vote Comments

K***s

Ukraine

Verified Purchase

5 .0

2022-07-28

I would not hesitate to purchase from l-p.com! Everyone that I dealt with, especially Rachel, was extremely helpful and prompt with all of their responses. The quality of the Sfp Cage is also exceptional. Thank you to everyone for making this as easy and good as it's been. We truly appreciated it.

44 Helpful vote Comments

J***r

New Zealand

Verified Purchase

5 .0

2022-02-15

LINK-PP is the best supplier in China. The high quality, the perfect after sales services, the Fast delivery, the professional sales and so on. Now, the SI-80007-F has been worked on my switch without any problems. Moreover, the price is more favorable than other suppliers.

46 Helpful vote Comments

z***n

Singapore

Verified Purchase

5 .0

2021-09-16

The cheapest 10/25/40G Transceiver Modules I have bought, but the best.

70 Helpful vote Comments

J***i

Brunei Darussalam

Verified Purchase

5 .0

2021-08-27

Excellent service, and the quality is also good, I am going to buy more things from you guys.

85 Helpful vote Comments

T***i

Germany

Verified Purchase

5 .0

2021-07-14

Shipment arrive quickly with no issues. Prices were very competitive

78 Helpful vote Comments

F***l

Finland

Verified Purchase

5 .0

2021-02-24

The experience with l-p.com was very good. The only complaint was that 10/25/40G Transceiver Modules was received a little late than I expected. Hope it would be Faster for my next purchase. Thank you.

56 Helpful vote Comments