What is the maximum distance supported by the SFP-10G-T-30 at 10 Gbps?

It supports data transmission distances up to 30 meters using Cat6a or Cat7 copper cabling.

What type of connector interface does this module use?

It is equipped with a standard, premium-grade RJ45 interface for standard copper patch cords.

Does the SFP-10G-T-30 support hot-plugging?

Yes, it features a hot-pluggable SFP+ footprint, allowing installation or replacement without powering down host devices.

Is the SFP-10G-T-30 compatible with major networking brands?

Yes, it is built to strict SFP+ MSA standards to ensure excellent interoperability with leading switches and routers.

Hi there, our server room runs a hybrid environment with Cisco Nexus, Ubiquiti UniFi, and some older Netgear ProSafe switches. Can this LP-RJ45TG-3YC module auto-negotiate properly across all these different vendor slots? Does it strictly follow SFF-8431 and SFP+ MSA specs? We had link flapping issues with generic 10GBASE-T transceivers before.

Yes, absolutely. The LINK-PP LP-RJ45TG-3YC is engineered strictly based on the SFP+ MSA, SFF-8431, and SFF-8432 standards, incorporating an advanced premium PHY chip. It is fully programmed for broad multi-vendor compatibility (including Cisco, Ubiquiti, Netgear, Mikrotik, etc.) and supports standard Auto-Negotiation for 10GBASE-T Ethernet links. The built-in RX_LOS (Loss of Signal) feature ensures rapid link status monitoring, preventing the common link-flapping issues seen in lower-tier unbranded modules.

We are looking to upgrade our university campus network architecture and need to batch-deploy around 150 units of these RJ-45 transceivers into our Top-of-Rack setup. Is there a B2B volume pricing tier or corporate discount available? Also, what's the lead time for this quantity to the West Coast US

Thank you for reaching out! For enterprise-level batch-deployments of 150+ units, we definitely provide tiered wholesale discounts and can offer free expedited shipping (as we waive shipping costs for orders over $600). Since the LP-RJ45TG-3YC is currently in 'Active' status and mass-produced in our automated production workshops, we have high stock availability. Standard shipping to the US West Coast typically takes 3-5 business days via DHL/FedEx. Please contact our B2B sales team directly for an official commercial invoice quote.

The spec table says this module is rated for Commercial Temperature (0°C to +70°C). We need to place several 10G links in unconditioned outdoor cabinets and roadside base station backhaul units where internal housing temps regularly exceed 75°C during summer. Do you offer an Industrial-Grade version of this copper transceiver?

Great question! This specific model (LP-RJ45TG-3YC) is optimized for standard commercial environments like indoor data centers and enterprise server rooms (0°C to +70°C). However, for harsh deployments like outdoor cabinets or cellular base station backhauls, LINK-PP does manufacture customized Industrial-Grade (-40°C to +85°C) 10GBASE-T SFP+ copper modules with enhanced EMC shielding and ruggedized silicon. Please let our tech team know your exact thermal limits, and we will match you with the corresponding industrial-grade part number.

Can we run this module using standard Cat6 copper patch cables, or is Cat6a/Cat7 strictly mandatory to hit the full 30-meter reach? Our existing structured cabling is a mix of shielded and unshielded Cat6. Will the performance degrade significantly at 10 Gbps speeds?

To guarantee full, error-free 10 Gbps throughput at the maximum 30-meter transmission distance, we highly recommend using high-quality Cat6a or Cat7 (SFTP/FTP) shielded copper cabling. Standard Cat6 cables can work for shorter distances (typically up to 15-20 meters depending on environmental electromagnetic interference and cross-talk). For high-density enterprise routing, sticking to IEEE 802.3an compliant Cat6a or better ensures stable link initialization and optimal signal integrity across the entire copper interface.

Breadcrumb: Home; Products; Optics Transceivers | SFP Modules; 10/25/40G/100G Transceiver Modules; 10G SFP+; 224197

Click to open expanded view

D-Link SFP-10G-T-30 Compatible LINK-PP 10GBASE-T SFP+ Copper 30m RJ-45 Transceiver Module

Name: D-Link SFP-10G-T-30 Compatible LINK-PP 10GBASE-T SFP+ Copper 30m RJ-45 Transceiver Module
Brand: LINK-PP
SKU: 224197
Price: 30.1 USD
Availability: InStock
Rating: 5 (21 reviews)

# 224197

Product: D-Link SFP-10G-T-30 Compatible LINK-PP 10GBASE-T SFP+ Copper 30m RJ-45 Transceiver Module
SKU: 224197
P/N: LP-RJ45TG-3YC
Price: $ 35
Stock: 713 in Stock
Sold: 1.5K
Product URL: https://www.l-p.com/products/493931.htm

For Order Over $1000 Get $15.00 Off , Code: Linkpp15

For Order Over $3000 Get $50.00 Off , Code: Linkpp50

For Order Over $5000 Get $100.00 Off , Code: Linkpp100

New Users: $10 Coupon for Orders , Code: linkpp2610

21 Reviews

4 Questions

Request Stock

1.5K Sold

$ 35

Free shipping over $600, If you need a more favorable price, please contact us directly.

Qty (pcs) :

Unit Price :

$ 35

100

$ 33.25

1000

$ 32.2

3000

$ 31.15

6000

$ 30.1

Manufacture: LINK-PP

P/N: LP-RJ45TG-3YC

Compatible:: Cisco; LINK-PP; 10Gtek; Alcatel-Lucent; Arista; Aruba; Avaya; Broadcom; Brocade; Ciena; D-Link; Dell; EdgeCore; Extreme; FS; Fortinet; Generic; H3C; HPE BladeSystem; HW; IBM; Intel; Juniper; Mellanox; Mikrotik; NETGEAR; NVIDIA/Mellanox; Palo Alto; ProCurve; Ubiquiti; Wiitek

Compatible P/N:: DEM-440XT-I | 30m; SFP-10G-T-30 | 30m; SFP-10G-T-30-RP | 30m

Shipping:

To Be Negotiated

Free Shipping

Can't deliver

to United States via {{now_chooseship?now_chooseship.name:''}}

Estimated delivery time : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} days. See details

5-Year Warranty 30-Day Returns 30-Day Exchange

Stock:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantity:

( Min. Order {{detail_data.prodInfo.minimum_ordered_quantity}} )

undeliverable

Total Price:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Add to wish

Specifications

Specification
Videos
Matching Products
Download
Q&A
Customer Reviews

D-Link SFP-10G-T-30 Compatible LINK-PP 10GBASE-T SFP+ Specifications

The D-Link SFP-10G-T-30 Compatible LINK-PP module is a high-performance, cost-effective 10GBASE-T SFP+ (Small Form Factor Pluggable Plus) copper transceiver module. Designed for high-speed communication links over Cat6a/Cat7 copper cabling, it enables OEMs and network operators to deploy 10 Gbps Ethernet connectivity into existing SFP+ ports, extending the life and flexibility of network infrastructure.

D-Link Part Number	SFP-10G-T-30	Vendor Name	LINK-PP
Part Status	Active	Form Factor	SFP+
Max Data Rate	10Gbps	Cable Distance	30m@Cat6a/Cat7 or Better
Connector	RJ-45	Cable Type	Copper
RX_LOS	Yes	Operating Temperature Range	0°C to +70°C
EMC (Electro Magnetic Compatibility)	Supported	Protocols	IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431

Videos

Matching Products

Pictures

ID#

Description

Price

Stock

Add to Cart

Download

Product Drawing

PDF
LP-RJ45TG-3YC.pdf

Questions & Answers
Ask a Question

No data

Q: Hi there, our server room runs a hybrid environment with Cisco Nexus, Ubiquiti UniFi, and some older Netgear ProSafe switches. Can this LP-RJ45TG-3YC module auto-negotiate properly across all these different vendor slots? Does it strictly follow SFF-8431 and SFP+ MSA specs? We had link flapping issues with generic 10GBASE-T transceivers before. By M***e on 2026-02-15

A: Hi! Yes, absolutely. The LINK-PP LP-RJ45TG-3YC is engineered strictly based on the SFP+ MSA, SFF-8431, and SFF-8432 standards, incorporating an advanced premium PHY chip. It is fully programmed for broad multi-vendor compatibility (including Cisco, Ubiquiti, Netgear, Mikrotik, etc.) and supports standard Auto-Negotiation for 10GBASE-T Ethernet links. The built-in RX_LOS (Loss of Signal) feature ensures rapid link status monitoring, preventing the common link-flapping issues seen in lower-tier unbranded modules. By admin on 2026-02-15
Q: We are looking to upgrade our university campus network architecture and need to batch-deploy around 150 units of these RJ-45 transceivers into our Top-of-Rack setup. Is there a B2B volume pricing tier or corporate discount available? Also, what's the lead time for this quantity to the West Coast US By C***n on 2025-09-28

A: Thank you for reaching out! For enterprise-level batch-deployments of 150+ units, we definitely provide tiered wholesale discounts and can offer free expedited shipping (as we waive shipping costs for orders over $600). Since the LP-RJ45TG-3YC is currently in 'Active' status and mass-produced in our automated production workshops, we have high stock availability. Standard shipping to the US West Coast typically takes 3-5 business days via DHL/FedEx. Please contact our B2B sales team directly for an official commercial invoice quote. By admin on 2025-09-28
Q: The spec table says this module is rated for Commercial Temperature (0°C to +70°C). We need to place several 10G links in unconditioned outdoor cabinets and roadside base station backhaul units where internal housing temps regularly exceed 75°C during summer. Do you offer an Industrial-Grade version of this copper transceiver? By A***r on 2025-09-02

A: Great question! This specific model (LP-RJ45TG-3YC) is optimized for standard commercial environments like indoor data centers and enterprise server rooms (0°C to +70°C). However, for harsh deployments like outdoor cabinets or cellular base station backhauls, LINK-PP does manufacture customized Industrial-Grade (-40°C to +85°C) 10GBASE-T SFP+ copper modules with enhanced EMC shielding and ruggedized silicon. Please let our tech team know your exact thermal limits, and we will match you with the corresponding industrial-grade part number. By admin on 2025-09-02
Q: Can we run this module using standard Cat6 copper patch cables, or is Cat6a/Cat7 strictly mandatory to hit the full 30-meter reach? Our existing structured cabling is a mix of shielded and unshielded Cat6. Will the performance degrade significantly at 10 Gbps speeds? By B***r on 2025-07-03

A: To guarantee full, error-free 10 Gbps throughput at the maximum 30-meter transmission distance, we highly recommend using high-quality Cat6a or Cat7 (SFTP/FTP) shielded copper cabling. Standard Cat6 cables can work for shorter distances (typically up to 15-20 meters depending on environmental electromagnetic interference and cross-talk). For high-density enterprise routing, sticking to IEEE 802.3an compliant Cat6a or better ensures stable link initialization and optimal signal integrity across the entire copper interface. By admin on 2025-07-03

Customer Reviews
Write a Review

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

All Reviews ({{comment.star_num?comment.star_num:comment.count}})

All Reviews

5 stars only

4 stars only

3 stars only

2 stars only

1 star only
Reviews with Pictures ( {{comment.pic_comment}} )
See All Reviews

No data

A***n

Canada

Verified Purchase

5 .0

2025-11-23

Upgraded our local network rendering farm using these RJ-45 transceivers. SFF-8431 specifications are fully met, hot-pluggable mechanism makes maintenance completely painless. No latency spikes during heavy enterprise cloud storage backups.

42 Helpful vote Comments

R***z

Greece

Verified Purchase

5 .0

2025-11-12

Durable metal housing, perfect fit for ToR copper links.

25 Helpful vote Comments

L***s

Japan

Verified Purchase

5 .0

2025-10-04

Instant plug-and-play in my Mikrotik CRS switch block.

128 Helpful vote Comments

C***r

Norway

Verified Purchase

5 .0

2025-08-22

Recognized instantly by Ubiquiti UniFi Pro aggregation switch!

118 Helpful vote Comments

J***e

United States

Verified Purchase

5 .0

2025-06-01

Plugged these LINK-PP modules into our core switch matrix for data center leaf-spine interconnects. Flawless Auto-Negotiation with multi-vendor systems, running exceptionally cool at full 10 Gbps throughput. Massive savings over original OEM brand optics.

155 Helpful vote Comments

M***n

Chile

Verified Purchase

5 .0

2025-02-21

The integrated PHY chip inside this module manages heat incredibly well.

26 Helpful vote Comments

B***n

Belgium

Verified Purchase

5 .0

2024-11-07

Good product at a good price. Shipping is quick enough.

88 Helpful vote Comments

D***e

South Africa

Verified Purchase

5 .0

2024-09-05

I'm impressed with the detail you share related to your Internet order processing. As a new customer, it gives me a level of confidence in your company that I didn't have the experience with you to evaluate otherwise. Great work!

23 Helpful vote Comments

b***r

United States

Verified Purchase

5 .0

2024-06-22

It matches well with my device. And the customer service reply to my question Fast. I get the product quickly.

91 Helpful vote Comments

S***l

Finland

Verified Purchase

5 .0

2024-06-13

As an MSP, we deployed 80 units of these LP-RJ45TG-3YC copper transceivers for enterprise workstation clustering. Full IEEE 802.3an compliance, active RX_LOS functionality works perfectly, and thermal dissipation is way better than cheap generic brands.

33 Helpful vote Comments

T***n

Russian Federation

Verified Purchase

5 .0

2024-06-07

10 Gbps Ethernet runs stable over 25m Cat7 patch cords.

32 Helpful vote Comments

M***s

Morocco

Verified Purchase

5 .0