Netgear CWDM-SFP-1310 Compatible LINK-PP 1.25G SFP CWDM Optical Transceiver Module(1310nm,80km,SMF,Duplex LC,DDM) The Netgear CWDM-SFP-1310 Compatible LINK-PP SFP transceiver is high performance, cost effective modules supporting data rate of 1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Netgear CWDM-SFP-1410 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1410nm,40km,DOM,Duplex LC) Designed for single-mode fiber networks, the Netgear CWDM-SFP-1410 Compatible LINK-PP stands out as a high-performance, cost-efficient SFP transceiver. It provides stable 1.25Gbps data transmission with a reach of up to 40km. Equipped with a CWDM DFB laser transmitter, a PIN photodiode with integrated TIA, and an MCU control module, this transceiver ensures reliable performance. It adheres to Class 1 laser safety standards and supports SFP MSA and SFF-8472 digital

Netgear CWDM-SFP-1430 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1430nm,40km,DOM,SMF,Duplex LC) Designed for single-mode fiber networks, the Netgear CWDM-SFP-1430 Compatible LINK-PP stands out as a high-performance, cost-efficient SFP transceiver. It provides stable 1.25Gbps data transmission with a reach of up to 40km. Equipped with a CWDM DFB laser transmitter, a PIN photodiode with integrated TIA, and an MCU control module, this transceiver ensures reliable performance. It adheres to Class 1 laser safety standards and supports SFP MSA and SFF-8472 digital

Netgear CW-SFP10G80-49-I Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (Industrial, SMF, 1490nm, 80km, LC, DOM) The Netgear CW-SFP10G80-49-I Compatible LINK-PP module is an industrial-grade 10G SFP+ CWDM optical transceiver capable of 10Gbps data transmission up to 80 kilometers over single-mode fiber (SMF).The module features a three-part internal architecture composed of a cooled EML laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU intelligent control unit. This optimized hardware configuration ensures stable signal

Netgear CWDM-SFP-1530 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1530nm,40km,SMF,Duplex LC,DOM) The Netgear CWDM-SFP-1530 Compatible LINK-PP module is a high?performance, cost effective 1.25G SFP transceiver designed for single mode fiber networks. It supports reliable data transmission up to 40 km using a CWDM DFB laser, with built-in digital diagnostics (SFF-8472) and full compliance with SFP MSA and Class 1 laser safety standards.   Netgear Part NumberCWDM-SFP-1530Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1530nm Max

Netgear CWDM-SFP-1570 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1570nm,40km,SMF,Duplex LC,DOM) The Netgear CWDM-SFP-1570 Compatible LINK-PP module is a high performance, cost?effective 1.25G SFP transceiver designed for single-mode fiber networks. It supports reliable data transmission up to 40 km using a CWDM DFB laser, with built-in digital diagnostics (SFF-8472) and full compliance with SFP MSA and Class 1 laser safety standards.   Netgear Part NumberCWDM-SFP-1570Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1570nm Max

NETGEAR AFM735 Compatible LINK-PP 155M SFP Specifications AFM735 functions as an industrial-grade 155M SFP multi-mode optical transceiver, pairing a 1310nm FP laser with a PIN photodetector to secure a 2km transmission span throughout a ruggedized -40°C to +85°C operating envelope. NETGEAR Part NumberAFM735Vendor NameLINK-PP Form Factor SFP Max Data Rate 155Mbps Wavelength 1310nm Max Cable Distance 2km Connector Duplex LC Media MMF Transmitter Type FP Receiver Type PIN TX Power -18 to -10dBm RX Power -30 to -6dBm

Netgear AGM732F Compatible LINK-PP 1G SFP Specifications The Netgear AGM732F Compatible LINK-PP module is a 1G SFP optical transceiver designed for stable gigabit transmission over single-mode fiber. It delivers dependable performance at a 1310nm operating wavelength with a reach of up to 10km. Netgear Part NumberAGM732FVendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1310nm Max Cable Distance 10km Connector Duplex LC Transmitter Type FP 1310nm Media SMF Receiver Type PIN TX Power -9 to 0dBm RX Power -23 to -

Netgear AGM734 Compatible LINK-PP 1000BASE-T SFP Specifications AGM734 is a commercial-grade 1000BASE-T copper SFP transceiver module engineered for efficient gigabit connectivity up to 100m over Cat 5 cabling, featuring a compact RJ-45 connector and an eco-conscious design that draws a typical low power dissipation of just 1.05W while housing its circuitry in a fully metallic enclosure to guarantee low electromagnetic interference across its 0°C to 70°C operating temperature range. Netgear Part NumberAGM734Vendor NameLINK-PP Part Status Active Form Factor

Netgear AXM763-I Compatible LINK-PP 10G SFP+ Specifications Netgear AXM763-I Compatible LINK-PP module is an industrial-grade 10GBASE-LRM SFP+ optical transceiver operating at 1310nm, supporting up to 220m transmission over OM3 multi-mode fiber with a duplex LC/UPC interface and integrated DOM for real-time monitoring across MMF links. Netgear Part NumberAXM763-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1310nm Max Cable Distance 220m Connector Duplex LC Media MMF Transmitter Type FP Receiver Type PIN TX

Netgear DWDM-SFP10G-58.98 Compatible LINK-PP C23 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1558.98nm, 80km, Duplex LC, DOM) The Netgear DWDM-SFP10G-58.98 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Netgear DWDM-SFP10G-55.75 Compatible LINK-PP C27 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1555.74nm, 80km, Duplex LC, DOM) The Netgear DWDM-SFP10G-55.75 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Netgear DWDM-SFP10G-53.33 Compatible LINK-PP C30 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1553.32nm, 40km, Duplex LC, DOM) The Netgear DWDM-SFP10G-53.33 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Netgear DWDM-SFP10G-53.33-I Compatible LINK-PP C30 10G SFP+ Specifications DWDM-SFP10G-53.33-I is a 10G SFP+ DWDM transceiver operating on the 1553.32nm (C30) wavelength, built with duplex LC interfaces for 40km single-mode transmission and equipped with real-time Digital Optical Monitoring (DOM) to withstand hostile temperatures ranging from -40°C to +85°C. Netgear Part NumberDWDM-SFP10G-53.33-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1553.32nm  Max Cable Distance 40km Connector Duplex LC Media SMF

Netgear DWDM-SFP10G-51.72-I Compatible LINK-PP C32 10G SFP+ Specifications DWDM-SFP10G-51.72-I is an industrial-grade 10G SFP+ DWDM optical transceiver that leverages a precise 1551.72nm wavelength (Channel 32) and duplex LC interface to deliver reliable 40km single-mode fiber links across harsh -40°C to +85°C environments, backed by integrated real-time digital diagnostic monitoring. Netgear Part NumberDWDM-SFP10G-51.72-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1551.72nm Max Cable Distance 40km Connector Duplex

Netgear DWDM-SFP10G-47.72-I Compatible LINK-PP C37 10G SFP+ Specifications DWDM-SFP10G-47.72-I serves as a 10G SFP+ DWDM optical transceiver, delivering precision light transmission at a 1547.71nm (Channel C37) wavelength. Engineered for long-reach applications, it transmits reliable 10Gbps data streams over up to 40km of single-mode fiber via duplex LC connectivity. Featuring an integrated cooled EML laser and PIN photodiode, it comes complete with real-time Digital Diagnostic Monitoring (DDM) telemetry for proactive network health and signal performance monitoring.