Alcatel-Lucent CW-SFP10G40-29 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1290nm, 40km, LC, DOM) The Alcatel-Lucent CW-SFP10G40-29 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement

Alcatel-Lucent CW-SFP10G40-35 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1350nm, 40km, LC, DOM) The Alcatel-Lucent CW-SFP10G40-35 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement

Alcatel-Lucent SFP-GIG-35CWD40 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1350nm,40km,DOM,Duplex LC) The Alcatel-Lucent SFP-GIG-35CWD40 Compatible LINK-PP SFP optical transceiver combines reliable long-haul communication and economical design. Operating at 1.25Gbps over single-mode fiber up to 40km, it integrates a CWDM DFB transmitter, a PIN receiver with trans-impedance preamplifier, and MCU control circuitry. Fully compliant with Class I laser safety regulations, it is compatible with the SFP Multi-Source Agreement and includes complete SFF-8472 digital

Alcatel-Lucent SFP-GIG-59CWD40 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1590nm,40km,SMF,Duplex LC,DOM) The Alcatel-Lucent SFP-GIG-59CWD40 Compatible LINK-PP module is a high performance, cost effective 1.25G SFP transceiver designed for single-mode fiber networks. It supports reliable data transmission up to 40 km using a CWDM DFB laser, with built-in digital diagnostics (SFF-8472) and full compliance with SFP MSA and Class 1 laser safety standards.   Alcatel-Lucent Part NumberSFP-GIG-59CWD40Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps

Alcatel-Lucent CW-SFP10G40-61 Compatible LINK-PP 10G SFP+ Specifications CW-SFP10G40-61 10G CWDM optical module integrates a cooled 1610nm EML laser and PIN receiver into a hot-pluggable SFP+ footprint, leveraging low-dispersion optical signaling to transmit up to 40km over single-mode fiber while delivering granular real-time telemetry via digital optical monitoring (DOM). Alcatel-Lucent Part NumberCW-SFP10G40-61Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1610nm Max Cable Distance 40km Connector Duplex LC Media SMF

Alcatel-Lucent 3HE10550AA-I Compatible LINK-PP 100G QSFP28 Specifications The Alcatel-Lucent 3HE10550AA-I Compatible LINK-PP module is an industrial-grade QSFP28 LR4 100G optical transceiver designed for robust high-speed data transmission over single-mode fiber. Utilizing LAN-WDM technology operating within the 1310nm band, this module supports a 10km reach and features a duplex LC interface with built-in Digital Diagnostics Monitoring for real-time network optimization in harsh environments. Alcatel-Lucent Part Number3HE10550AA-IVendor NameLINK-PP Form Factor

Alcatel-Lucent SFP-10G-C3M Compatible LINK-PP 3m (10ft) 10G SFP+ Copper Cable RoHS Compliant (3-meter, Passive, SFP+ to SFP+) The Alcatel-Lucent SFP-10G-C3M Compatible LINK-PP SFP+ Direct Attach Cable is Compliant With the SFF-8431,SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length(up to 7m).The 10G SFP+ Copper Cable offers a cost-effective connectivity for establishing a 10-Gigabit short-distance connectivity within a rack or between adjacent racks in data centers. Alcatel-Lucent Part

Alcatel-Lucent SFP-GEB-T-IL Compatible LINK-PP 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Industrial Transceiver Module The Alcatel-Lucent SFP-GEB-T-IL Compatible LINK-PP module is a high-performance, industrial-grade copper SFP transceiver operating over an SGMII interface. Powered by the Realtek RTL8213B chip, it supports 10/100/1000Mbps auto-negotiation and delivers reliable full-duplex links up to 100 meters over Category 5 UTP cabling. It features integrated Tx-disable and Rx_los functions as standard. Alcatel-Lucent Part NumberSFP-GEB-T-ILVendor NameLINK-PP Part

Alcatel-Lucent iSFP-GIG-T Compatible LINK-PP 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module The Alcatel-Lucent iSFP-GIG-T Compatible LINK-PP SFP Copper Transceiver 10/100/1000Base-T or 1000Base-T only SFP Copper Transceiver is high performance, cost effective module, compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mb/s data-rate up to 100 meters reach over twisted-pair category 5 cable. Alcatel-Lucent Part NumberiSFP-GIG-TVendor NameLINK-PP Part Status Active

Alcatel-Lucent DW-SFP10G80-60 Compatible LINK-PP C60 10G SFP+ DWDM Optical Transceiver Module (SMF, 1529.55nm, 80km, Duplex LC, DOM) The Alcatel-Lucent DW-SFP10G80-60 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Alcatel-Lucent DW-SFP10G80-58 Compatible LINK-PP C58 10G SFP+ DWDM Optical Transceiver Module (SMF, 1531.12nm, 80km, Duplex LC, DOM) The Alcatel-Lucent DW-SFP10G80-58 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Alcatel-Lucent DW-SFP10G80-57 Compatible LINK-PP C57 10G SFP+ DWDM Optical Transceiver Module (SMF, 1531.89nm, 80km, Duplex LC, DOM) The Alcatel-Lucent DW-SFP10G80-57 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Alcatel-Lucent DW-SFP10G80-56 Compatible LINK-PP C56 10G SFP+ DWDM Optical Transceiver Module (SMF, 1532.68nm, 80km, Duplex LC, DOM) The Alcatel-Lucent DW-SFP10G80-56 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with

Alcatel-Lucent DW-SFP10G80-54 Compatible LINK-PP C54 10G SFP+ DWDM Optical Transceiver Module (SMF, 1534.25nm, 80km, Duplex LC, DOM) Alcatel-Lucent DW-SFP10G80-54 Compatible LINK-PP module is a 10G DWDM SFP+ optical transceiver built for long-haul single-mode fiber links, sustaining stable 10Gbps data transmission up to 80km. This fiber module adopts a refined three-level internal hardware structure, equipped with temperature-cooled EML laser transmitters, integrated APD photodiode plus TIA receiver and independent MCU control circuitry, all modules pass international Class 1 laser

Alcatel-Lucent DW-SFP10G80-52 Compatible LINK-PP C52 10G SFP+ DWDM Optical Transceiver Module (SMF, 1535.82nm, 80km, Duplex LC, DOM) Alcatel-Lucent DW-SFP10G80-52 Compatible LINK-PP module is a 10G DWDM SFP+ optical transceiver built for long-haul single-mode fiber links, sustaining stable 10Gbps data transmission up to 80km. This fiber module adopts a refined three-level internal hardware structure, equipped with temperature-cooled EML laser transmitters, integrated APD photodiode plus TIA receiver and independent MCU control circuitry, all modules pass international Class 1 laser

Alcatel-Lucent DW-SFP10G80-50 Compatible LINK-PP C50 10G SFP+ DWDM Optical Transceiver Module (SMF, 1537.40nm, 80km, Duplex LC, DOM) The Alcatel-Lucent DW-SFP10G80-50 Compatible LINK-PP 80km 10G DWDM SFP+ transceiver delivers dependable long-range single-mode fiber data transfer at 10Gbps bandwidth. Its optimized three-layer internal hardware consists of cooled EML laser, APD-TIA receiving unit and dedicated MCU control chips, fully certified for Class 1 laser safety. Standardized to SFP MSA rules and fitted with SFF-8472 digital diagnostics, it supports real-time performance tracking