Generic CW-SFP10G40-27-I Compatible LINK-PP 10G SFP+ Specifications The Generic CW-SFP10G40-27-I Compatible LINK-PP 10G SFP+ optical transceiver module supports data rates of up to 10.7Gbps over single-mode fiber (SMF) and has a transmission range of up to 40km at a wavelength of 1270nm. Generic Part NumberCW-SFP10G40-27-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1270nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX Power -1 to +5dBm RX Power -23 to -6dBm

Generic CW-SFP10G40-29 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1290nm, 40km, LC, DOM) The Generic CW-SFP10G40-29 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Generic CWDM-SFP10G-20SP Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20SP standardizes 20km single-mode fiber links utilizing a 1290nm CWDM architecture, blending a hot-swappable 10G SFP+ form factor with advanced DFB/PIN optical components and real-time DDM diagnostics. Engineered for high-density networking, this transceiver delivers low-latency 10Gbps data transmission, full LC duplex connectivity, and reliable SFF-8472 compliance for seamless operational monitoring in enterprise and telecom infrastructures. Generic Part NumberCWDM-SFP10G-20SPVendor

Generic CWDM-SFP10G-20SP Compatible LINK-PP 10G SFP+ Specifications The Generic CWDM-SFP10G-20SP Compatible LINK-PP module is a 10G SFP+ optical transceiver over single-mode fiber that supports 10.7 Gbps, 1310 nm CWDM, and a 20 km reach, and DOM visibility.  It is a plug-and-play solution for compatible LINK-PP devices. Generic Part NumberCWDM-SFP10G-20SPVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1310nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX

Generic CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ Specifications This Generic CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ module supports data rates of up to 10 Gbps, operates at the 1330 nm CWDM wavelength, and delivers a maximum transmission distance of up to 40 km over SMF, allowing quick deployment of high-speed connectivity in LINK-PP-compatible networking equipment. Generic Part NumberCW-SFP10G40-33-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1330nm Max Cable Distance 40km Connector Duplex LC Media SMF

Generic CW-SFP10G40-35 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1350nm, 40km, LC, DOM) The Generic CW-SFP10G40-35 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Generic CWDM-SFP10G-20S Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20S is a specialized 10G SFP+ CWDM optical transceiver module engineered for 20km duplex LC single-mode fiber links, leveraging a precise 1390nm DFB laser and highly sensitive PIN photodiode coupled with integrated digital diagnostic monitoring (DDM) to ensure deterministic signal integrity. Generic Part NumberCWDM-SFP10G-20SVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1390nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter

Generic CWDM-SFP10G-20S Compatible LINK-PP 10G SFP+ Specifications The CWDM-SFP10G-20S optical module encapsulates a high-stability 1410nm CWDM DFB laser transmitter and an integrated PIN photodiode receiver within an SFF-8431 compliant 10G SFP+ duplex LC footprint. It is engineered to sustain high-speed 10Gbps single-mode fiber spans up to 20km with a low bit-error rate, while providing deep operational insight via SFF-8472 compliant real-time Digital  Diagnostics Monitoring (DDM). Operating across a commercial 0°C to 70°C temperature range, this hot-pluggable module

Generic CWDM-SFP10G-20L Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20L is engineered as a 10G CWDM SFP+ optical transceiver centered at 1470nm, incorporating a cooled EML laser paired with a PIN photodiode to ensure stable optical output, supporting transmission distances up to 20km over single-mode fiber through a duplex LC interface, while enabling real-time digital diagnostic monitoring for continuous visibility into key operating parameters. Generic Part NumberCWDM-SFP10G-20LVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps

Generic CW-SFP10G40-53 Compatible LINK-PP 10G SFP+ Specifications CW-SFP10G40-53 is specified as a 10G SFP+ CWDM module centered at 1530nm, equipped with a cooled EML laser and PIN photodiode, capable of reaching 40km over single-mode fiber through a duplex LC interface, and providing real-time digital diagnostics to track module operating conditions. Generic Part NumberCW-SFP10G40-53Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1530nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML

Generic CW-SFP10G40-55 Compatible LINK-PP 10G SFP+ Specifications CW-SFP10G40-55 employs a cooled EML transmitter and PIN receiver at a 1550nm CWDM wavelength, supporting extended 40 km SMF links through a duplex LC interface, and incorporates real-time DOM features to monitor module status and optical performance. Generic Part NumberCW-SFP10G40-55Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1550nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX Power -1 to

Generic CWDM-SFP10G-20L Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20L functions as a 1570nm 10G SFP+ CWDM transceiver that leverages a cooled EML laser and PIN photodiode architecture, supports transmission distances up to 20km over single-mode fiber via duplex LC interface, and provides digital optical monitoring for continuous operational insight. Generic Part NumberCWDM-SFP10G-20LVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1570nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type

Generic CW-SFP10G40-59-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1590nm, 40km, DOM) The Generic CW-SFP10G40-59-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and

Generic CWDM-SFP10G-10M Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-10M is engineered as a CWDM 10G SFP+ optical transceiver operating at 1610nm, featuring a EML laser and PIN photodiode design that enables single-mode fiber data transmission for distances up to 10km via a duplex LC connector, with built-in real-time digital optical monitoring to provide immediate access to performance metrics. Generic Part NumberCWDM-SFP10G-10MVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1610nm Max Cable Distance 10km Connector

Generic DW-SFP10G80-19 Compatible LINK-PP C19 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1562.23nm, 80km, Duplex LC, DOM) The Generic DW-SFP10G80-19 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Generic DW-SFP10G40-24-I Compatible LINK-PP C24 10G SFP+ Specifications DW-SFP10G40-24-I utilizes C-band 1558.17nm DWDM technology over duplex LC single-mode fiber, pairing an EML laser and PIN photodiode engine to sustain 10G data streams up to 40km while offering live parameter visibility through integrated digital diagnostic monitoring. Generic Part NumberDW-SFP10G40-24-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1558.17nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type