Brocade 100G-QSFP28-4WDM-10KM Compatible LINK-PP 100G QSFP28 CWDM Optical Transceiver Module (SMF, 1271nm, 1291nm, 1311nm and 1331nm, 10km, LC, DOM) The Brocade 100G-QSFP28-4WDM-10KM Compatible LINK-PP 100G QSFP CWDM4 Transceiver is designed for 10km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Brocade Part

Brocade 100G-QSFP28-CWDM4-2KM Compatible LINK-PP 100G QSFP28 Specifications The Brocade 100G-QSFP28-CWDM4-2KM Compatible LINK-PP module is a high-performance 100G QSFP28 CWDM4 optical transceiver expertly designed for modern data center interconnects. Featuring a built-in four-wavelength DFB laser and robust PIN detector, this single-mode module delivers up to 25.78Gbps per channel. Operating seamlessly under commercial temperatures, it guarantees efficient 100GBASE Ethernet links with exceptional reliability. Brocade Part Number100G-QSFP28-CWDM4-2KMVendor NameLINK-PP

Brocade 10G-SFPP-BXU-80K-I Compatible LINK-PP 10G SFP+ Specifications Brocade 10G-SFPP-BXU-80K-I Compatible LINK-PP module is an industrial-grade, single-fiber 10G SFP+ BiDi optical transceiver engineered for long-haul 80km transmissions over single-mode fiber (SMF), utilizing a simplex LC/UPC interface that maximizes fiber capacity by transmitting at 1490nm-TX and receiving at 1550nm-RX on a single strand. Brocade Part Number10G-SFPP-BXU-80K-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1490nm-TX/1550nm-RX Max Cable Distance 80km

Brocade E1MG-CWDM80-1270 Compatible LINK-PP 1.25G SFP CWDM Optical Transceiver Module(1270nm,80km,SMF,Duplex LC,DDM) The Brocade E1MG-CWDM80-1270 Compatible LINK-PP SFP transceiver is high performance, cost effective modules supporting data rate of 1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade E1MG-CWDM20-1310 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1310nm, 20km,DOM) Brocade E1MG-CWDM20-1310 Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Brocade Part NumberE1MG-CWDM20-1310Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps

Brocade XBR-SFP10G1330-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1330nm, 40km, LC, DOM) The Brocade XBR-SFP10G1330-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade XBR-SFP10G1370-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1370nm, 40km, LC, DOM) The Brocade XBR-SFP10G1370-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade E1MG-CWDM80-1370 Compatible LINK-PP 1G SFP Specifications E1MG-CWDM80-1370 operates as a 1370nm CWDM SFP module, delivering 1Gbps data rates via a DFB laser and PIN photodiode, while supporting up to 80km transmission over single-mode fiber within a 0 to +70°C temperature range. Real-time digital optical monitoring is embedded for precise tracking of Tx/Rx power, bias current, temperature, and voltage, ensuring full visibility into link health. Brocade Part NumberE1MG-CWDM80-1370Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength

Brocade E1MG-CWDM40-1390 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1390nm,40km,DOM,Duplex LC) The Brocade E1MG-CWDM40-1390 Compatible LINK-PP is a high-performance, cost-efficient SFP transceiver designed for single-mode fiber networks. It delivers a data rate of 1.25Gbps with a transmission distance of up to 40km. Built with a CWDM DFB laser transmitter, a PIN photodiode with integrated TIA, and an MCU control module, this unit complies with Class 1 laser safety standards and supports SFP MSA and SFF-8472 digital diagnostic monitoring.   Brocade

Brocade E1MG-CWDM80-1410 Compatible LINK-PP 1.25G SFP CWDM Optical Transceiver Module(1410nm,80km,SMF,Duplex LC,DDM) The Brocade E1MG-CWDM80-1410 Compatible LINK-PP SFP transceiver is high performance, cost effective modules supporting data rate of 1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade XBR-SFP10G1410-20 Compatible LINK-PP 10G SFP+ Specifications The XBR-SFP10G1410-20 optical module encapsulates a high-stability 1410nm CWDM DFB laser transmitter and an integrated PIN photodiode receiver within an SFF-8431 compliant 10G SFP+ duplex LC footprint. It is engineered to sustain high-speed 10Gbps single-mode fiber spans up to 20km with a low bit-error rate, while providing deep operational insight via SFF-8472 compliant real-time Digital  Diagnostics Monitoring (DDM). Operating across a commercial 0°C to 70°C temperature range, this hot-pluggable module

Brocade CW47-10GSFP-10-I Compatible LINK-PP 10G SFP+ Specifications CW47-10GSFP-10-I is specified as a 10G SFP+ CWDM transceiver centered at 1470nm, providing a duplex LC interface, DOM functionality, up to 10km reach over single-mode fiber, and support for -40°C to +85°C environments. Designed for high-density optical networking, this hot-swappable module combines advanced DFB and PIN components with robust industrial-grade reliability to ensure seamless, low-latency performance across harsh enterprise and telecom infrastructures. Brocade Part

Brocade CW-SFP10G80-49-I Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (Industrial, SMF, 1490nm, 80km, LC, DOM) The Brocade CW-SFP10G80-49-I Compatible LINK-PP module is an industrial-grade 10G SFP+ CWDM optical transceiver capable of 10Gbps data transmission up to 80 kilometers over single-mode fiber (SMF).The module features a three-part internal architecture composed of a cooled EML laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU intelligent control unit. This optimized hardware configuration ensures stable signal

Brocade E1MG-CWDM80-1490 Compatible LINK-PP 1.25G SFP CWDM Optical Transceiver Module(1490nm,80km,SMF,Duplex LC,DDM) The Brocade E1MG-CWDM80-1490 Compatible LINK-PP SFP transceiver is high performance, cost effective modules supporting data rate of 1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade XBR-SFP10G1490-40 Compatible LINK-PP 10G SFP+ Specifications The Brocade XBR-SFP10G1490-40 Compatible LINK-PP 10G SFP+ transceiver delivers dependable 10Gbps performance at the 1490nm CWDM wavelength and supports long-reach links up to 40km over single-mode fiber. Compact and hot-pluggable, it enables rapid rollout of high-speed optical connections for LINK-PP-compatible systems. Brocade Part NumberXBR-SFP10G1490-40Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10Gbps Wavelength 1490nm Max Cable Distance 40km Connector Duplex LC Media

Brocade XBR-SFP10G1510-40-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1510nm, 40km, DOM) The Brocade XBR-SFP10G1510-40-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement