FS CWDM-SFP10G-20SP Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20SP standardizes 20km single-mode fiber links utilizing a 1290nm CWDM architecture, blending a hot-swappable 10G SFP+ form factor with advanced DFB/PIN optical components and real-time DDM diagnostics. Engineered for high-density networking, this transceiver delivers low-latency 10Gbps data transmission, full LC duplex connectivity, and reliable SFF-8472 compliance for seamless operational monitoring in enterprise and telecom infrastructures. FS Part NumberCWDM-SFP10G-20SPVendor NameLINK-PP

FS CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ Specifications This FS CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ module supports data rates of up to 10 Gbps, operates at the 1330 nm CWDM wavelength, and delivers a maximum transmission distance of up to 40 km over SMF, allowing quick deployment of high-speed connectivity in LINK-PP-compatible networking equipment. FS Part NumberCW-SFP10G40-33-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1330nm Max Cable Distance 40km Connector Duplex LC Media SMF Optical

FS CW-SFP10G40-35 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1350nm, 40km, LC, DOM) The FS CW-SFP10G40-35 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

FS CW-SFP10G40-47 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1470nm, 40km, LC, DOM) The FS CW-SFP10G40-47 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

FS CWDM-SFP10G-20L Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20L is engineered as a 10G CWDM SFP+ optical transceiver centered at 1470nm, incorporating a cooled EML laser paired with a PIN photodiode to ensure stable optical output, supporting transmission distances up to 20km over single-mode fiber through a duplex LC interface, while enabling real-time digital diagnostic monitoring for continuous visibility into key operating parameters. FS Part NumberCWDM-SFP10G-20LVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1470nm

FS CW-SFP10G80-53-I Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (Industrial, SMF, 1530nm, 80km, LC, DOM) The FS CW-SFP10G80-53-I Compatible LINK-PP module is a rugged industrial-grade 10G SFP+ CWDM optical transceiver that delivers steady 10Gbps data transmission across distances reaching 80 km on single-mode fiber (SMF).Engineered with an advanced three-section internal hardware framework, the module integrates a cooled EML laser transmitter, APD photodiode embedded with trans-impedance preamplifier (TIA), and independent MCU intelligent control circuitry. This refined

FS CW-SFP10G80-55 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1550nm, 80km, LC, DOM) The FS CW-SFP10G80-55 Compatible LINK-PP SFP+ optical transceiver delivers premium performance at an economical cost, specially designed to transmit 10G signals up to 80 kilometers over single-mode fiber cables.The module adopts a three-core internal structure, including thermally stabilized EML laser transmitters, APD photodetectors integrated with trans-impedance amplifiers, and an MCU intelligent control unit. Every unit undergoes rigorous testing to meet global Class 1 laser

FS CW-SFP10G40-55 Compatible LINK-PP 10G SFP+ Specifications CW-SFP10G40-55 employs a cooled EML transmitter and PIN receiver at a 1550nm CWDM wavelength, supporting extended 40 km SMF links through a duplex LC interface, and incorporates real-time DOM features to monitor module status and optical performance. FS Part NumberCW-SFP10G40-55Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1550nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX Power -1 to +5dBm RX

FS CWDM-SFP10G-10M Compatible LINK-PP 10G SFP+ Specifications With a 1550nm CWDM design, CWDM-SFP10G-10M pairs a DFB laser with a PIN photodiode, supports duplex LC connection, extends transmission up to 10km over single-mode fiber, and includes real-time digital diagnostic monitoring for continuous tracking of module performance data. FS Part NumberCWDM-SFP10G-10MVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1550nm Max Cable Distance 10km Connector Duplex LC Media SMF Transmitter Type DFB Receiver Type PIN TX

FS CW-SFP10G40-57-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1570nm, 40km, DOM) The FS CW-SFP10G40-57-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

FS CW-SFP10G80-59-I Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (Industrial, SMF, 1590nm, 80km, LC, DOM) The FS CW-SFP10G80-59-I Compatible LINK-PP module is an industrial-grade 10G SFP+ CWDM transceiver for stable 10Gbps transmission up to 80km over single-mode fiber. Adopting a professional three-core hardware design with cooled EML laser, APD-TIA receiver and MCU control circuit, it ensures reliable, anti-interference signal performance in extreme temperatures and harsh industrial scenarios. Complying with SFP+ MSA specifications and Class 1 laser safety standards,

FS CW-SFP10G40-59-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1590nm, 40km, DOM) The FS CW-SFP10G40-59-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

FS CWDM-SFP10G-10M Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-10M is engineered as a CWDM 10G SFP+ optical transceiver operating at 1610nm, featuring a EML laser and PIN photodiode design that enables single-mode fiber data transmission for distances up to 10km via a duplex LC connector, with built-in real-time digital optical monitoring to provide immediate access to performance metrics. FS Part NumberCWDM-SFP10G-10MVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1610nm Max Cable Distance 10km Connector Duplex LC

FS DW-SFP10G40-17 Compatible LINK-PP C17 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1563.86nm, 40km, Duplex LC, DOM) The FS DW-SFP10G40-17 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement

FS DW-SFP10G80-17 Compatible LINK-PP C17 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1563.86nm, 80km, Duplex LC, DOM) The FS DW-SFP10G80-17 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

FS DW-SFP10G80-20 Compatible LINK-PP C20 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1561.41nm, 80km, Duplex LC, DOM) The FS DW-SFP10G80-20 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and