The LS-DW5910-80C serves as a 10G SFP+ DWDM solution configured for the 1530.33nm (C59) channel on the standard 100GHz ITU grid. Built with a cooled EML laser and high-sensitivity APD photodiode, it reliably spans up to 80km over single-mode fiber and provides real-time digital optical monitoring (DOM) for proactive network management.
LINK-PP Part Number
LS-DW5910-80C
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1530.33nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
0 to 70°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of LINK-PP LS-DW5910-80C 10G SFP+
LINK-PP LS-DW5910-80C provides reliable 10Gbps DWDM connectivity tailored for long-distance single-mode fiber deployments. Key highlights include a 1530.33nm center wavelength, 80km link span, standard duplex LC interface, and integrated real-time DOM diagnostics.
LINK-PP LS-DW5910-80C 10G SFP+ Optical Module
This transceiver features a hot-pluggable SFP+ footprint for quick installation and maintenance without powering down host systems. Built in strict compliance with the SFP+ MSA, it ensures broad mechanical and electrical compatibility across diverse networking hardware.
LS-DW5910-80C: 10 Gbps Connectivity for Metro Core Networks
A dedicated 10Gbps data rate delivers dependable bandwidth for high-traffic metro core routing and switching backbones. It provides stable throughput to meet the continuous aggregation demands of enterprise and campus network backhauls.
LS-DW5910-80C Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing enables multiple data channels to run simultaneously over a single optical strand. This technology maximizes existing fiber infrastructure capacity while significantly lowering cabling expansion costs.
LS-DW5910-80C Module with 1530.33nm Wavelength
Channel C59 operation at 1530.33nm aligns precisely with the standard 100GHz ITU-T wavelength grid. A cooled EML transmitter maintains tight spectral stability within the low-loss C-band transmission window.
LS-DW5910-80C Module Supporting 80km Transmission
Long-distance capability allows point-to-point single-mode fiber spans of up to 80km without intermediate optical amplification. An integrated high-sensitivity APD receiver maintains link integrity over extended spans.
LS-DW5910-80C Module with Duplex LC Interface
The industry-standard duplex LC optical connector ensures seamless mating with common patch cords and patch panels. Robust latching mechanics provide secure physical retention and minimal insertion loss during continuous operation.
LS-DW5910-80C Module with DOM for Real-Time Monitoring
Internal diagnostic circuitry fully supports SFF-8472 digital optical monitoring functions. Network operators can track real-time optical power, bias current, operating temperature, and supply voltage directly through network management interfaces.
LINK-PP LS-DW5910-80C 10G SFP+ Certification
LINK-PP LS-DW5910-80C DWDM SFP+ module adheres to rigorous international quality and regulatory frameworks to guarantee safe, reliable operation. The module fully complies with global standards including ISO 9001, CE, RoHS, and FCC certifications.
Every 10G DWDM optical module undergoes strict testing to verify optical spectral stability and bit error rate performance. Comprehensive signal integrity checks ensure each module operates reliably across its entire service life.
LS-DW5910-80C Quality Certifications
These certifications show that the transceiver is built according to strict international regulations. Enterprise and carrier clients can safely deploy these modules knowing they meet proven quality standards.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
LS-DW5910-80C Certified for Reliable Host-Device Compatibility
Comprehensive host interoperability validation ensures smooth integration with mainstream switches, routers, and transport gear. Correct EEPROM encoding enables seamless plug-and-play identification without triggering port warnings or protocol errors.
Every LS-DW5910-80C DWDM 10G SFP+ optical transceiver undergoes comprehensive performance inspections to ensure optimal transmission quality and hardware reliability. To learn more about our detailed validation procedures, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Verify center wavelength accuracy and spectral purity on ITU channels.
Eye Pattern Test
Evaluate optical signal clarity and transmitter jitter performance boundaries.
Bit Error Rate Test
Confirm error-free data transmission across extended fiber link distances.
Temperature Test
Check stable transceiver operation across varying commercial thermal conditions.
Product Shipping for LINK-PP LS-DW5910-80C 10G SFP+
LINK-PP provides secure packaging and reliable shipping methods to protect optical transceiver modules during transit. Standardized logistics procedures ensure every order arrives safely and promptly at worldwide customer locations.
Anti-Static Protective Packaging
Prevent electrostatic damage using specialized antistatic packaging for optical modules.
Shock-Resistant Transport Protection
Protect optical modules against physical impact and vibrations during transportation.
Fast Order Processing and Dispatch
Accelerate order fulfillment to ensure swift dispatch from warehouse facilities.
Global Logistics and International Delivery
Deliver shipments worldwide through reliable international express and freight carriers.
The LS-DW5910-80C DWDM module provides hot-swappable installation by sliding into standard SFP+ cages and mating with duplex LC patch cables. Properly aligned with DWDM optical multiplexers, it establishes secure 80km point-to-point links to optimize fiber capacity and data throughput throughout metro core networks.
LS-DW5910-80C Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal LS-DW5910-80C module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
You need a standard 9/125 single-mode fiber patch cable fitted with duplex LC connectors. Multimode fiber is not compatible and will cause severe signal loss over DWDM wavelengths. By
admin
A:
Spare modules can be stored safely in dry, non-condensing environments between -40°C and 85°C. Keep them in their original anti-static blister packaging to protect the optical modules. By
admin
A:
No, this is a fixed-wavelength module tuned specifically to 1530.33nm. It must be connected to a matching C59 channel port to pass through passive DWDM multiplexers without severe signal attenuation. By
admin
A:
An overloaded APD typically generates high bit error rates, intermittent link drops, or a sudden loss of carrier signal. In severe cases of persistent high optical power, the receiver circuit can suffer permanent hardware damage. By
admin
A:
Yes, sharp bends introduce macro-bending optical losses that consume your 22dB link margin. Maintaining proper fiber bend radius ensures optimal optical signal delivery over the entire span. By
admin
Our operations team selected this C59 SFP+ DWDM optic for a multi-site campus network. The EML/APD design provided dependable signal performance over the long single-mode link, and the SFF-8472 diagnostics made commissioning much faster. We could validate both ends before putting customer traffic on the circuit. :-D
Please write comments with more than three
character.
496901
510896
D***z
Belarus
Verified
Purchase
5 .0
2026-08-11
Used it for a 10GbE backhaul connection in an indoor telecom cabinet. Link negotiation was clean, and DDM helped our team verify transmit power, receive power, temperature, and voltage remotely. Very helpful for routine checks.
Please write comments with more than three
character.
496901
510887
D***d
India
Verified
Purchase
5 .0
2026-07-21
Plugged into our aggregation switch and linked at 10G right away. The LS-DW5910-80C SFP+ module is working on a 68km single-mode fiber route between two office sites. DOM data is easy to check during daily maintenance.
Please write comments with more than three
character.
496901
510883
M***n
Mexico
Verified
Purchase
5 .0
2026-06-05
Our network team installed four units for a campus aggregation project. Each LS-DW5910-80C DWDM module established a stable 10Gbps connection over single-mode fiber, and the monitoring information was visible from the switch CLI. Good for planned DWDM channel expansion.
Please write comments with more than three
character.
496901
510890
B***t
United States
Verified
Purchase
5 .0
2026-05-18
Bought these for a small batch deployment in a regional data room. Every 10G SFP+ DWDM module was recognized correctly, and the optical power readings stayed within our expected range. Good value for carrier-style fiber links. :)
Please write comments with more than three
character.
496901
510885
B***s
Maldives
Verified
Purchase
5 .0
2026-04-29
We use this 10G DWDM SFP+ for a remote cabinet uplink where dark fiber is limited. Sharing the fiber through a 100GHz DWDM MUX saved us from installing another cable. The 1530.33nm channel stayed clean and stable during the test period.
Please write comments with more than three
character.
496901
510894
K***t
Bulgaria
Verified
Purchase
5 .0
2026-03-24
This module is a good fit when you need a fixed 100GHz DWDM channel instead of tunable optics. Our procurement team ordered it for a planned C59 wavelength slot, and deployment was simple. Good consistency across the units we received.
Please write comments with more than three
character.
496901
510898
E***z
Indonesia
Verified
Purchase
4 .0
2026-03-09
The 10G DWDM SFP+ module works well on our 80km fiber link. One box had a small dent during shipping, but the optic inside was protected and installed normally.
Please write comments with more than three
character.
496901
510878
R***t
Argentina
Verified
Purchase
5 .0
2026-02-14
Tested this optic on a long indoor fiber route before using it in production. The link remained stable during continuous traffic testing, including backup traffic and NAS replication. Optical diagnostics were useful for confirming the receive level.
Please write comments with more than three
character.
496901
510880
L***s
Norway
Verified
Purchase
5 .0
2025-12-09
We used this 1530.33nm 100GHz DWDM transceiver to expand an existing multiplexed fiber path. It matched the channel plan correctly, and the Duplex LC interface made replacement quick. No link drops after several weeks.
Please write comments with more than three
character.
496901
510884
A***s
United Arab Emirates
Verified
Purchase
5 .0
2025-11-27
We tested the LS-DW5910-80C SFP+ module in an indoor equipment room at normal operating temperatures. TX and RX readings stayed consistent, and the 10G link held during sustained bidirectional traffic. It is now part of our production fiber backbone.
Please write comments with more than three
character.
496901
510877
M***n
India
Verified
Purchase
5 .0
2025-10-08
Installed this 1530.33nm transceiver on our 65km inter-building fiber backbone. DOM diagnostics report TX power at +1.8dBm and a stable temperature around 44°C.
Please write comments with more than three
character.
496901
510893
T***s
Hungary
Verified
Purchase
5 .0
2025-09-30
We added this 1530.33nm DWDM optical module to a 100GHz WDM system for a building-to-building network upgrade. It has been stable under normal office equipment-room conditions. The LC duplex ports fit our existing fiber management setup well.
Please write comments with more than three
character.
496901
510888
S***r
Finland
Verified
Purchase
4 .0
2025-08-15
Good 1530.33nm SFP+ optical transceiver for our DWDM channel. The outer package was a little loose in the carton, so we added extra protection for future orders. Product performance is fine.
Please write comments with more than three
character.
496901
510881
A***a
Indonesia
Verified
Purchase
5 .0
2025-07-23
We needed a specific C59 1530.33nm channel rather than a standard gray optic. This DWDM SFP+ fit the channel plan and worked reliably with our multiplexer. The 80km reach was suitable for our metro-area office connection.
Please write comments with more than three
character.
496901
510879
B***l
South Africa
Verified
Purchase
5 .0
2025-05-03
We deployed this 1530.33nm 80km SFP+ transceiver in a metro fiber ring for office traffic and IP camera backhaul. It has maintained a stable 10G connection, and DDM lets us catch optical changes early. Packaging and labeling also made channel identification easy.
Please write comments with more than three
character.
496901
510897
M***s
Iran, Islamic Republic of
Verified
Purchase
5 .0
2025-04-17
The module performs exactly as needed for a long-haul 10G fiber uplink. We checked DOM after installation and saw stable RX power with no unexpected alarms. A practical option for enterprise DWDM transport. =D
Please write comments with more than three
character.
496901
510882
J***s
Japan
Verified
Purchase
5 .0
2025-02-25
This 80km SFP+ module solved a difficult long-distance connection between our warehouse and main campus. The EML transmitter and APD receiver give us enough margin for the route. Installation was straightforward with standard single-mode patch cables.
Please write comments with more than three
character.
496901
510886
R***z
Taiwan, Province of China
Verified
Purchase
5 .0
2025-01-16
Installed in an enterprise switch pair for an 80km fiber connection. The module reported normal temperature and optical power through DOM, while traffic remained steady during large file transfers and overnight backups. It is a solid option for indoor long-distance 10G network expansion.
United States · English · USD
