Cisco QSFP-100G-LR4-S Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C Cisco Part Number QSFP-100G-LR4-S Form Factor QSFP28 Max Data Rate

HW 02311KNR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The HW 02311KNR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25

HW 02311KNU-80 Compatible LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C HW Compatible 02311KNU-80

Brocade 100G-QSFP28-CWDM4-2KM Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Brocade Part Number 100G-QSFP28-CWDM4-2KM

Brocade 10G-SFPP-BXD-60K Compatible LINK-PP LS-BL332710-60C 10GBASE-BX60-D BiDi SFP+ Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 60km, LC, DOM)The LS-BL332710-60C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 60km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Brocade 10G-SFPP-BXU-100K Compatible LINK-PP LS-BL495510-A0C 10GBASE-BX80-U BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1490nm-TX/1550nm-RX 100km, LC, DOM)The LS-BL495510-A0C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi

Brocade 10G-SFPP-BXU-40K Compatible LINK-PP LS-BL273310-40C SFP+ 10GBASE-BX40-U BiDi  Simplex LC/UPC SMF Optical Transceiver Module(SMF, 1270nm-TX/1330nm-RX, 40km,DOM)The LS-BL273310-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Brocade 10G-SFPP-BXU-80K Compatible LINK-PP LS-BL495510-80C 10GBASE-BX80-U BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1490nm-TX/1550nm-RX 80km, LC, DOM)The LS-BL495510-80C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source

Brocade 10G-SFPP-BXU-I Compatible LINK-PP LS-BL273310-10I SFP+ 10GBASE-BX10-U Simplex LC/UPC Optical Transceiver Module (SMF, 1270nm-TX/1330nm-RX, 10km, LC, DOM,Industrial)The LS-BL273310-10I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Brocade 10G-SFPP-LRM-I Compatible LINK-PP LS-MM3110-S2I 10GBASE-LRM SFP+ Optical Transceiver Module (MMF/SMF, 1310nm, 220m/1.4km, LC, Industrial, DOM)The LS-MM3110-S2I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 220m transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Extreme 10GB-BX10-U Compatible LINK-PP LS-BL273310-10C SFP+ 10Gbps BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1270nm-TX/1330nm-RX, 10km,DOM)The LS-BL273310-10C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement

Extreme 10GB-BX40-D Compatible LINK-PP LS-BL332710-40C SFP+ 10GBASE-BX BiDi Simplex Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 40km, LC, DOM)The LS-BL332710-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-84

Extreme 10GB-BX80-U-I Compatible LINK-PP LS-BL495510-80I SFP+ 10GBASE BiDi Simplex Optical Transceiver Module (SMF, 1490nm-TX/1550nm-RX 80km, LC, DOM, Industrial)The LS-BL495510-80I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source

Extreme 10GB-ZR-SFPP-I Compatible LINK-PP LS-SM5510-80I SFP+ 10GBASE-ZR Optical Transceiver Module(SMF, 1550nm, 80km, Duplex LC, Industrial, DOM)The LS-SM5510-80I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-847

Extreme 10GB-ZR100-SFPP-I Compatible LINK-PP LS-SM5510-A0I 10GBASE-ZR SFP+ Optical Transceiver Module (SMF, 1550nm, 100km, LC, DOM, Industrial)The LS-SM5510-A0I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Ciena 12250 Compatible LINK-PP LS-MM3110-S2C 10GBASE-LRM SFP+ Optical Transceiver Module (MMF/SMF, 1310nm, 220m/300m, LC, DOM)The LS-MM3110-S2C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 220m transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics