The DW-SFP10G80-58 operates as a 10G DWDM SFP+ module centered at the 1531.12nm (C58) ITU 100GHz grid, leveraging an integrated cooled EML laser and APD receiver to achieve transmission distances up to 80km over SMF. It features hot-pluggable electrical connectivity alongside real-time digital diagnostic monitoring (DDM) for accurate network status analysis.
Broadcom Part Number
DW-SFP10G80-58
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1531.12nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
0 to 70°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of Broadcom DW-SFP10G80-58 Compatible LINK-PP 10G SFP+
Broadcom DW-SFP10G80-58 Compatible LINK-PP combines 10Gbps transmission speed with dense wavelength division multiplexing technology to support single-mode fiber links up to 80km. Engineered with an industry-standard duplex LC interface and real-time digital monitoring, it provides a reliable, long-reach optical solution for commercial network environments.
Designed with a hot-pluggable SFP+ footprint, this optical transceiver enables quick field replacements without interrupting host network services. It strictly follows the SFP+ MSA standard to ensure seamless mechanical fit and electrical interoperability across diverse networking platforms.
DW-SFP10G80-58: 10 Gbps Connectivity for Metro-Access Aggregation
The module delivers a steady 10Gbps data rate to meet the bandwidth demands of modern carrier access rings and metro distribution points. Its robust throughput helps service providers aggregate multiple local traffic streams efficiently into regional transport hubs.
DW-SFP10G80-58 Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing enables multiple independent data channels to run concurrently over a single physical fiber pair. This capability significantly increases total bandwidth capacity without requiring expensive new cable installations.
DW-SFP10G80-58 Module with 1531.12nm Wavelength
Channel 58 operates on a fixed optical wavelength of 1531.12nm in accordance with the 100GHz ITU-T C-band grid. This precise spectral alignment minimizes channel crosstalk when multiplexed with neighboring DWDM frequencies.
An integrated cooled EML transmitter and sensitive APD receiver enable reliable optical reach across spans up to 80km on single-mode fiber. This extended distance capability eliminates the immediate need for intermediate optical amplifiers in long-haul routes.
DW-SFP10G80-58 Module with Duplex LC Interface
The industry-standard duplex LC optical connector ensures low insertion loss and secure patch cord mating. Its compact dual-fiber design fits high-density switch front panels while maintaining dependable physical connectivity.
DW-SFP10G80-58 Module with DDM for Real-Time Monitoring
Digital diagnostic functions compatible with SFF-8472 give network administrators immediate visibility into critical parameters such as optical power, operating temperature, and bias current. These diagnostic metrics help engineers detect link degradation early and streamline routine troubleshooting.
Broadcom DW-SFP10G80-58 Compatible LINK-PP SFP+ DWDM module adheres to strict manufacturing and quality controls governed by ISO 9001 standards. The transceiver also holds CE, RoHS, and FCC certifications, validating its safety, environmental compliance, and electromagnetic reliability.
Every 10G DWDM SFP+ module undergoes rigorous factory inspection, including optical eye-pattern verification, bit error rate analysis, and thermal stress cycles. These comprehensive testing procedures ensure consistent signal stability and reliable operation in long-haul transmission links.
DW-SFP10G80-58 Quality Certifications
This module meets globally recognized industrial standards for environmental safety, hazardous material restrictions, and electromagnetic emissions. These verified credentials assure network operators that the module is safe to deploy across enterprise and telecom infrastructures.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DW-SFP10G80-58 Certified for Reliable Host-Device Compatibility
Strict cross-platform verification on mainstream networking gear guarantees flawless integration with your host hardware. This testing process eliminates port configuration errors and ensures continuous, dependable link performance.
Every DW-SFP10G80-58 10G DWDM SFP+ optical module undergoes comprehensive factory evaluations to guarantee optimal signal integrity and long-distance transmission stability. To explore our validation procedures in detail, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Inspect optical spectrum alignment to prevent DWDM channel frequency drift.
Eye Pattern Test
Evaluate optical signal quality and transmitter jitter performance under load.
Bit Error Rate Test
Measure data transmission accuracy across extended single-mode fiber links reliably.
Temperature Test
Assess thermal stability and operational endurance across standard commercial ranges.
Product Shipping for Broadcom DW-SFP10G80-58 Compatible LINK-PP 10G SFP+
Each DW-SFP10G80-58 DWDM 10G SFP+ optical transceiver is packaged and handled under strict quality standards to ensure safe transit. We coordinate with reliable carriers to deliver your orders quickly and securely to destinations worldwide.
Anti-Static Protective Packaging
Utilize electrostatic shielding packs to prevent static damage during transit.
Shock-Resistant Transport Protection
Employ reinforced outer cartons to safeguard internal optical components securely.
Fast Order Processing and Dispatch
Accelerate warehouse handling workflows to ensure rapid order dispatch.
Global Logistics and International Delivery
Partner with trusted international couriers to provide prompt worldwide shipping.
Simply insert the DW-SFP10G80-58 10G DWDM module into an SFP+ port, connect clean duplex LC single-mode fiber, and verify DWDM C58 channel alignment. In metro-access aggregation deployments, it aggregates distributed 10G traffic into core transport rings across 80km spans without requiring intermediate amplification.
DW-SFP10G80-58 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DW-SFP10G80-58 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
No, this is a fixed-wavelength transceiver pre-locked to the ITU-T C58 grid at 1531.12nm straight from the factory. You can plug it directly into the corresponding MUX port without any software calibration. By
admin
A:
Yes, that is the main purpose of passive DWDM Mux and Demux equipment. You can multiplex this C58 channel alongside other 100GHz ITU-grid optics on one single-mode fiber pair. By
admin
A:
Yes, the transceiver uses a standard duplex LC interface that fits any standard 1.25mm optical cleaning tool. Regular dry cleaning of the optical end-face before patching is strongly recommended to protect the APD. By
admin
Please write comments with more than three
character.
496898
513363
P***z
Russian Federation
Verified
Purchase
5 .0
2026-07-10
We use these in a data center interconnect project where multiple 10G services share DWDM infrastructure. The Duplex LC interface made the rack-side installation straightforward. DOM access is especially helpful because our operations team can spot power changes before they turn into a service issue.
Please write comments with more than three
character.
496898
513372
E***r
Italy
Verified
Purchase
5 .0
2026-06-25
Good choice for extending a 10GbE uplink over existing single-mode fiber. The EML transmitter and APD receiver combination gave us a clean, steady connection on a long DWDM channel.
Please write comments with more than three
character.
496898
513366
J***n
Denmark
Verified
Purchase
5 .0
2026-05-30
This module helped us add another 100GHz DWDM wavelength without changing the fiber infrastructure. The 1531.12nm channel fit our optical plan, while the EML transmitter delivered a consistent signal across the long indoor fiber route. Monitoring temperature and optical power through DDM has been useful for routine maintenance.
Please write comments with more than three
character.
496898
513370
J***g
Romania
Verified
Purchase
5 .0
2026-03-27
Our procurement team ordered these for phased network upgrades across several indoor sites. Every unit was labeled clearly, and the wavelength control was important for avoiding conflicts with our existing DWDM channels. After deployment, the modules carried video, backup, and office traffic without instability.
Please write comments with more than three
character.
496898
513364
J***r
Bangladesh
Verified
Purchase
5 .0
2026-01-14
Installed in our private cloud rack for a long-distance storage replication path. It handled the 10G traffic smoothly, and the LC ports were convenient for our existing patch panel layout.
Please write comments with more than three
character.
496898
513368
C***n
Macao
Verified
Purchase
4 .0
2025-12-03
Everything was fine with the 1531.12nm DWDM transceiver. Delivery took two extra days because of the local carrier, which was not a major problem for our project schedule. The module arrived sealed and ready to deploy.
Please write comments with more than three
character.
496898
513374
C***g
Nepal
Verified
Purchase
5 .0
2025-10-25
We needed a DWDM 10G SFP+ transceiver for an 80km single-mode fiber route between the main server room and a disaster recovery site. The LS-DW5810-80C was recognized immediately. We checked TX/RX power with DOM after installation, and both ends remained stable under sustained backup traffic.
Please write comments with more than three
character.
496898
513369
K***s
Singapore
Verified
Purchase
5 .0
2025-08-26
We used it for base station backhaul over a shared DWDM fiber route. The 1531.12nm channel matched our plan, and the module was easy to monitor through the switch interface. ;)
Please write comments with more than three
character.
496898
513367
B***s
New Zealand
Verified
Purchase
5 .0
2025-03-15
Tested this 10G SFP+ DWDM transceiver on a long campus backbone before a batch rollout. Link negotiation was normal, packet loss stayed at zero during throughput testing, and receiver power remained comfortably above the -23dBm sensitivity limit. It is a practical optic for structured 10G fiber deployments. :D
Please write comments with more than three
character.
496898
513371
E***t
Philippines
Verified
Purchase
5 .0
2025-01-04
This 10G 80km SFP+ transceiver worked well for our indoor telecom room to remote equipment room connection. Optical power stayed within a safe range, and there were no random link drops. :-)
United States · English · USD
