The Broadcom DW-SFP10G80-24 Compatible LINK-PP module is a high-performance 10G SFP+ DWDM optical transceiver supporting data rates up to 10.7Gbps. Operating at 1558.17nm ITU Channel 24 over single-mode fiber, it features a cooled EML transmitter, APD photodiode receiver, duplex LC connector, and 3.3V power supply, delivering reliable 80km transmission reach for long-haul networks and telecommunication links.
Broadcom Part Number
DW-SFP10G80-24
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1558.17nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
0 to 70°C
Protocols
SFP+ MSA Compliant, CPRI, eCPRI
Key Features of Broadcom DW-SFP10G80-24 Compatible LINK-PP 10G DWDM SFP+
Engineered for demanding network architectures, this hot-pluggable SFP+ module combines a 100GHz C-band cooled EML laser with an APD photodiode for superior receiver sensitivity. It provides built-in digital diagnostic monitoring, full compliance with SFF-8472 and SFP+ MSA standards, and operates stably within standard commercial temperature ranges.
Designed for enterprise and carrier-grade optical networks, this 10G SFP+ DWDM module enables cost-effective bandwidth expansion. It delivers high signal integrity, low power consumption under 600mA, and seamless interoperability across diverse optical networking environments.
DW-SFP10G80-24: 10G Connectivity for LTE System
Delivering robust 10Gbps throughput, this optical transceiver supports LTE wireless mobile networks requiring low-latency and reliable long-range data transport. Its high-density SFP+ footprint maximizes port availability across mobile backhaul routers and optical transmission nodes.
DW-SFP10G80-24 Module with DWDM Technology for Fiber Efficiency
Utilizing advanced dense wavelength division multiplexing technology, this 10G module dramatically increases fiber capacity over existing single-mode infrastructure. It enables multiple wavelengths to share a single fiber strand, greatly optimizing optical network bandwidth and efficiency.
DW-SFP10G80-24 Module with 1558.17nm Wavelength
Operating specifically at Channel 24 (1558.17nm) on the 100GHz ITU C-band grid, this DWDM transceiver ensures precise spectral accuracy. The stabilized cooled EML laser maintains tight wavelength stability, minimizing optical cross-talk in multi-channel systems.
Featuring a high-sensitivity APD photodiode and superior optical power budget, this module spans up to 80km over single-mode fiber without signal amplification, making it ideal for metro networks and regional span extensions.
DW-SFP10G80-24 Module with Duplex LC Interface
Industry-standard duplex LC connectors provide secure latching and low optical insertion loss. This universal physical interface allows straightforward integration with standard patch cables, simplifying cabling management in high-density rack equipment.
DW-SFP10G80-24 Module with DOM for Real-Time Monitoring
Integrated Digital Optical Monitoring (DOM) gives network administrators real-time metrics including optical output power, receiver sensitivity, operating temperature, laser bias current, and supply voltage for proactive maintenance and fault diagnosis.
Built to meet strict global market regulations, this 10G SFP+ DWDM module adheres to CE, FCC, UKCA, UL, REACH, and RoHS standards, guaranteeing safety, quality, and environmental compliance.
Every transceiver undergoes comprehensive production testing, verifying wavelength precision, power levels, and bit error performance to ensure flawless operation and zero defects prior to customer delivery.
DW-SFP10G80-24 Quality Certifications
Fully compliant with Class 1 laser safety standards, SFF-8472 specs, and international electromagnetic safety norms, this optical transceiver delivers reliable long-term performance across demanding network environments.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DW-SFP10G80-24 Certified for Reliable Host-Device Compatibility
Pre-programmed and extensively validated across leading switch platforms, this SFP+ transceiver ensures seamless plug-and-play operation, accurate EEPROM identification, and error-free communication with major vendor networking hardware.
Our rigorous multi-stage quality control process screens every SFP+ transceiver to guarantee optimal optical signal transmission, thermal stability, and long-term deployment reliability.
Optical Spectrum Test
Precision optical spectrum analyzers verify exact 1558.17nm channel output and side-mode suppression ratio standards.
Eye Pattern Test
High-speed oscilloscopes evaluate transmit eye diagrams to ensure clean signal margins and minimal jitter.
Bit Error Rate Test
Comprehensive BER testing confirms error-free data transmission under maximum 10.7Gbps traffic conditions.
Temperature Test
Thermal chamber stress testing guarantees stable operation across the full 0°C to +70°C commercial range.
Product Shipping for Broadcom DW-SFP10G80-24 Compatible LINK-PP 10G SFP+
Each optical transceiver module is carefully packaged and shipped under strict logistics standards, protecting delicate optoelectronic components throughout global transit.
Anti-Static Protective Packaging
Individual ESD-shielding bags prevent static damage during storage and handling.
Shock-Resistant Transport Protection
Custom-molded foam inserts cushion transceivers against physical impact and vibration.
Fast Order Processing and Dispatch
Efficient warehouse workflows ensure rapid order fulfillment and prompt dispatch schedules.
Global Logistics and International Delivery
Trusted express carriers provide worldwide door-to-door delivery with real-time tracking services.
Inserting the hot-pluggable transceiver into compatible SFP+ switch slots is effortless. Connect single-mode duplex LC fiber patch cables, and the module automatically negotiates link speeds up to 10.7Gbps, enabling immediate high-performance long-haul optical connectivity.
DW-SFP10G80-24 Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable DW-SFP10G80-24 modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
A:
Yes! To guarantee the full 80km transmission distance and stable 10G data rate, you should use standard Single-Mode Fiber (SMF), such as OS1 or OS2, with a Duplex LC connector. We highly recommend OS2 for optimal long-haul signal integrity. By
admin
A:
Yes, absolutely! Our LS-DW2410-80C transceiver is fully coded and tested for multi-vendor environments. It bypasses OEM vendor-lock smoothly and provides plug-and-play interoperability across Cisco, Arista, and other major switch brands without triggering any system alarms. By
admin
A:
Definitely. For enterprise batch deployments, we offer tiered wholesale pricing that significantly lowers your cost per unit. Please reach out to our sales team directly with your exact quantity, and we'll provide a custom quote within 24 hours. By
admin
A:
Yes. All our DWDM optical modules strictly comply with SFP+ MSA, IEEE 802.3ae, and ITU-T 100GHz grid standards. They also carry CE, FCC, and RoHS certifications, ensuring they meet all global compliance and telecom industry regulations. By
admin
A:
We absolutely manufacture industrial-grade versions (-40°C to 85°C) for harsh outdoor cell tower or street cabinet environments. Just specify the industrial wide-temp requirement when requesting a quote! By
admin
Please write comments with more than three
character.
496183
511884
T***k
Ethiopia
Verified
Purchase
5 .0
2026-06-02
We tested this LS-DW2410-80C module across different OEM platforms. TX/RX optical power levels remain stable over a 75km SMF run. Built-in DDM provides precise diagnostics. Highly recommended for enterprise DCI!
Please write comments with more than three
character.
496183
511880
J***s
Switzerland
Verified
Purchase
5 .0
2026-05-27
As a network engineer, I demand strict 1558.17nm wavelength accuracy. This SFP+ module delivers exact ITU grid compliance. It seamlessly integrated into our existing multi-brand switch topology without alarms.
United States · English · USD
