Cisco DWDM-SFP10G-63.86 Compatible LINK-PP C17 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1563.86nm, 40km, Duplex LC, DOM) The Cisco DWDM-SFP10G-63.86 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Cisco DWDM-SFP10G-63.86 Compatible LINK-PP C17 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1563.86nm, 80km, Duplex LC, DOM) The Cisco DWDM-SFP10G-63.86 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Cisco DWDM-SFP10G-63.86-I Compatible LINK-PP C17 10G SFP+ Specifications DWDM-SFP10G-63.86-I stands out in its specifications with a 10G SFP+ DWDM design centered at 1563.86nm, integrating a cooled EML laser and PIN photodiode to deliver stable optical transmission, while also supporting up to 40km over SMF and real-time digital optical monitoring for detailed module status visibility. Cisco Part NumberDWDM-SFP10G-63.86-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1563.86nm Max Cable Distance 40km Connector Duplex LC Media

Dell DWDM-SFP10G-63.05-I Compatible LINK-PP C18 10G SFP+ Specifications DWDM-SFP10G-63.05-I integrates an advanced cooled EML laser with a PIN photodiode to stream 10G duplex LC optical signals over single-mode fiber up to 40km, operating precisely on the 1563.04nm wavelength with full real-time Digital Diagnostic Monitoring integration. Dell Part NumberDWDM-SFP10G-63.05-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1563.04nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type

Dell DWDM-SFP10G-61.41 Compatible LINK-PP C20 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1561.41nm, 40km, Duplex LC, DOM) The Dell DWDM-SFP10G-61.41 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement

Cisco DWDM-SFP10G-61.41 Compatible LINK-PP C20 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1561.41nm, 80km, Duplex LC, DOM) The Cisco DWDM-SFP10G-61.41 Compatible LINK-PP SFP+ DWDM transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Dell DWDM-SFP10G-61.41-I Compatible LINK-PP 10G SFP+ Specifications The Dell DWDM-SFP10G-61.41-I Compatible LINK-PP 10G SFP+ transceiver delivers ultra-fast data transfer rates up to 10.7Gbps over SMF, offers distances of up to 40km, and operates at an exact DWDM wavelength of 1561.41nm, ensuring dependable, long-distance connectivity with exceptional stability. Dell Part NumberDWDM-SFP10G-61.41-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1561.41nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter

H3C DWDM-SFP10G-60.61-40 Compatible LINK-PP C21 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1560.60nm, 40km, Duplex LC, DOM) The H3C DWDM-SFP10G-60.61-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Ciena DWDM-SFP10G-60.61-40-I Compatible LINK-PP 10G SFP+ Specifications The Ciena DWDM-SFP10G-60.61-40-I Compatible LINK-PP 10G SFP+ module provides high-speed data transmission up to 10.7Gbps over single-mode fiber (SMF). It supports communication distances of up to 40km and operates at an exact DWDM wavelength of 1560.60nm for reliable, stable performance. Ciena Part NumberDWDM-SFP10G-60.61-40-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1560.60nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter

Extreme DWDM-SFP10G-59.79 Compatible LINK-PP C22 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1559.79nm, 40km, Duplex LC, DOM) The Extreme DWDM-SFP10G-59.79 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Ciena DWDM-SFP10G-59.79-40-I Compatible LINK-PP 10G SFP+ Specifications The Ciena DWDM-SFP10G-59.79-40-I Compatible LINK-PP 10G SFP+ transceiver delivers data rates of up to 10.7Gbps across single-mode fiber (SMF), supporting transmission distances of up to 40 km while operating at the precise DWDM wavelength of 1559.79 nm. Ciena Part NumberDWDM-SFP10G-59.79-40-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1559.79nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX

H3C DWDM-SFP10G-57.36-40-I Compatible LINK-PP C25 10G SFP+ Specifications DWDM-SFP10G-57.36-40-I corresponds to a 10G DWDM SFP+ transceiver operating at 1557.36nm, featuring cooled EML and PIN components, duplex LC interface design, integrated DOM functionality, and reliable 40km SMF reach under -40 to +85°C conditions. H3C Part NumberDWDM-SFP10G-57.36-40-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1557.36nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX

Extreme DWDM-SFP10G-56.55-I Compatible LINK-PP C26 10G SFP+ Specifications DWDM-SFP10G-56.55-I defines a 10G SFP+ DWDM optical transceiver at 1556.55nm within the C-band, incorporating a cooled EML laser and PIN photodiode, duplex LC connectivity, up to 40 km reach over single-mode fiber, real-time DDM support, and an operating temperature range of −40 to +85 °C. Extreme Part NumberDWDM-SFP10G-56.55-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1556.55nm Max Cable Distance 40km Connector Duplex LC Media SMF

H3C DWDM-SFP10G-54.13-40 Compatible LINK-PP C29 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1554.13nm, 40km, Duplex LC, DOM) The H3C DWDM-SFP10G-54.13-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Dell DWDM-SFP10G-54.13-I Compatible LINK-PP C29 10G SFP+ Specifications Supporting data rates of up to 10.7 Gbps over SMF, enabling links of up to 40 km on a precisely controlled 1554.13 nm DWDM wavelength, the Dell DWDM-SFP10G-54.13-I Compatible LINK-PP 10G SFP+ optical module is intended for high-performance optical networks. Dell Part NumberDWDM-SFP10G-54.13-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1554.13nm  Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML DWDM Receiver Type

Netgear DWDM-SFP10G-53.33-I Compatible LINK-PP C30 10G SFP+ Specifications DWDM-SFP10G-53.33-I is a 10G SFP+ DWDM transceiver operating on the 1553.32nm (C30) wavelength, built with duplex LC interfaces for 40km single-mode transmission and equipped with real-time Digital Optical Monitoring (DOM) to withstand hostile temperatures ranging from -40°C to +85°C. Netgear Part NumberDWDM-SFP10G-53.33-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1553.32nm  Max Cable Distance 40km Connector Duplex LC Media SMF