The Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP module is a 1.25 Gbps BiDi SFP optical transceiver that transmits at 1550nm and receives at 1310nm to provide full-duplex data communication over a single simplex LC fiber, with link distances of up to 3 km via single-mode fiber.
Ubiquiti Part Number
UACC-OM-SM-1G-S
Vendor Name
LINK-PP
Form Factor
SFP
Max Data Rate
1.25Gbps
Wavelength
1550nm-TX/1310nm-RX
Max Cable Distance
3km
Connector
Simplex LC
Media
SMF
Transmitter Type
FP
Receiver Type
PIN
TX Power
-15 to -8dBm
RX Power
-23 to -1dBm
Receiver Sensitivity
<-23dBm
DOM Support
Yes
Operating Temperature Range
0 to 70°C
Protocols
Fast Ethernet, Gigabit Fibre Channel, MSA Compliant
Key Features of Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP 1.25G SFP
This Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP 1G BiDi SFP is hot-pluggable and features a BiDi design (1550nm TX/1310nm RX) for 1.25 Gbps bidirectional transmission over a single simplex LC fiber, supporting Fast Ethernet and Gigabit-class links with a reach of up to 3 km over single-mode fiber, thereby reducing fiber count and cabling complexity.
The Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP module uses a FP laser for transmission and a PIN photodiode paired with a trans-impedance amplifier (TIA) for reception, delivering reliable optical output and receiver sensitivity suitable for medium-range SMF links.
UACC-OM-SM-1G-S: Reliable 1.25 Gbps Connectivity for Efficient Gigabit Connectivity
This Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP BiDi SFP module supports 1.25 Gbps operation for common applications, including Ethernet and fiber aggregation, where a single-fiber solution is preferred.
UACC-OM-SM-1G-S Module with 1550nm-TX/1310nm-RX Wavelength
The standard wavelength pairing of 1550nm (TX) / 1310 nm(RX) provides compatibility with other BiDi modules using the complementary wavelength assignment, as well as with SFP MSA-compliant equipment.
This Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP BiDi transceiver is specified for up to 3km transmission on standard single-mode fiber under normal link conditions, providing reliable bidirectional connectivity for metro access, campus network interconnects, and point-to-point links.
UACC-OM-SM-1G-S Module with Simplex LC Interface
The simplex LC interface provides a single, compact connector for bidirectional operation, driving down fiber consumption, streamlining cable management, and lowering the overall deployment cost.
UACC-OM-SM-1G-S Module with DOM for Real-Time Monitoring
The onboard DOM of the Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP module gives access to live telemetry, temperature, supply voltage, and transmitted/received optical power, facilitating early fault detection and easy troubleshooting.
Precision testing ensures performance consistency across real-world applications.
UACC-OM-SM-1G-S Quality Certifications
Aligned with global standards for safety, durability, and performance assurance.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
UACC-OM-SM-1G-S Certified for Reliable Host-Device Compatibility
Validated for reliable use with LINK-PP networking equipment.
Rigorous Testing Ensures Reliable SFP Performance
Thorough inspection procedures ensure that every LINK-PP module runs smoothly and efficiently. To find out more, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Spectrum analysis verifies precise wavelength alignment for stable and standards-compliant optical transmission.
Eye Pattern Test
Signal waveform analysis ensures clean eye patterns for improved transmission stability and quality.
Bit Error Rate Test
BER testing ensures minimal transmission errors and supports dependable network communication.
Temperature Test
Thermal performance testing ensures reliable operation under both high and low temperature conditions.
Product Shipping for Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP 1.25G SFP
LINK-PP ensures every module arrives deployment-ready, backed by a logistics system built for fast, safe, and dependable international delivery.
Anti-Static Protective Packaging
Protective anti-static layers help prevent damage caused by unwanted electrical charges.
Shock-Resistant Transport Protection
Vibration-resistant packaging ensures the secure delivery of fragile components.
Fast Order Processing and Dispatch
Rapid shipping preparation ensures timely delivery and customer satisfaction.
Global Logistics and International Delivery
Cross-border logistics solutions facilitate the delivery of goods to customers worldwide.
The Ubiquiti UACC-OM-SM-1G-S Compatible LINK-PP 1G BiDi SFP transceiver demonstrates reliable single-fiber transmission for short-distance network links. With 1550nm TX/1310nm RX support, a 3km reach, and DOM monitoring, it is ideal for enterprise access switches, campus network connections, security monitoring systems, and Ethernet links.
UACC-OM-SM-1G-S Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable UACC-OM-SM-1G-S modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
A:
It requires standard Single-Mode Fiber with a Simplex LC connector. You only need a single strand of fiber for both transmitting and receiving data, which maximizes your cabling infrastructure. By
admin
A:
Yes, it is fully MSA compliant and codes seamlessly with mainstream commercial switches including Cisco, HPE, and Juniper without triggering unauthorized optic warnings. By
admin
A:
Yes, since it transmits at 1550nm and receives at 1310nm, you must pair it with a 1310nm-TX/1550nm-RX BiDi transceiver on the other end of the single-mode fiber to establish the link. By
admin
A:
This specific model features a commercial temperature range of 0 to 70C. For outdoor unconditioned cabinets, we advise using the industrial grade version (LS-BL55311G-03I) to ensure hardware stability in extreme weather. By
admin
A:
Yes, it fully supports standard DDM/DOM parameters. You can monitor real-time RX power, TX power, voltage, and temperature directly through your network management system. By
admin
Please write comments with more than three
character.
496400
399668
F***s
Lithuania
Verified
Purchase
5 .0
2025-01-08
As a network engineer handling campus fiber rollouts, these 3km bidi modules are perfect for short single-mode runs between buildings. The 1550nm DFB laser provides clean signal. I tested them on Aruba and Ubiquiti gear without any unrecognized transceiver errors. Highly reliable for our B2B networking needs. :-)
Please write comments with more than three
character.
496400
399654
L***s
Macao
Verified
Purchase
5 .0
2024-05-13
Evaluating these 1G BiDi SFP transceivers for enterprise procurement. The commercial temperature rating is fine for our climate-controlled server rooms. Real-time DDM tracks RX power accurately. Using simplex LC fiber saves us significant cabling costs on our 1.5km runs. Very stable hardware for our corporate LAN infrastructure.
Please write comments with more than three
character.
496400
399655
I***g
Norway
Verified
Purchase
5 .0
2024-04-06
I needed a cost-effective solution for a multi-brand switch topology. This 1550nm-TX/1310nm-RX optic negotiated 1000BASE-BX instantly across Juniper and Mikrotik edge devices. Optical attenuation is well within margin for a 2.5km drop. The build quality is excellent for commercial indoor usage. A solid network upgrade choice.
United States · English · USD
