H3C CWDM-SFP10G-1270-20 Compatible LINK-PP 10G SFP+ Specifications The H3C CWDM-SFP10G-1270-20 Compatible LINK-PP module is a 10G CWDM SFP+ transceiver designed for single-mode fiber links of up to 20 kilometers. It operates at the precise wavelength of 1270nm. H3C Part NumberCWDM-SFP10G-1270-20Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1270nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX Power -5 to +2dBm RX Power -16 to -1dBm Receiver

H3C SFP-GE-LH20-SM1290-CW Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1290nm, 20km,DOM) H3C SFP-GE-LH20-SM1290-CW Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring H3C Part NumberSFP-GE-LH20-SM1290-CWVendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps

H3C CWDM-SFP10G-1310-20 Compatible LINK-PP 10G SFP+ Specifications The H3C CWDM-SFP10G-1310-20 Compatible LINK-PP module is a 10G SFP+ optical transceiver over single-mode fiber that supports 10.7 Gbps, 1310 nm CWDM, and a 20 km reach, and DOM visibility.  It is a plug-and-play solution for compatible LINK-PP devices. H3C Part NumberCWDM-SFP10G-1310-20Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1310nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX

H3C SFP-GE-LH20-SM1310-CW Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1310nm, 20km,DOM) H3C SFP-GE-LH20-SM1310-CW Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring H3C Part NumberSFP-GE-LH20-SM1310-CWVendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps

H3C CWDM-SFP10G-1330-40-I Compatible LINK-PP 10G SFP+ Specifications This H3C CWDM-SFP10G-1330-40-I Compatible LINK-PP 10G SFP+ module supports data rates of up to 10 Gbps, operates at the 1330 nm CWDM wavelength, and delivers a maximum transmission distance of up to 40 km over SMF, allowing quick deployment of high-speed connectivity in LINK-PP-compatible networking equipment. H3C Part NumberCWDM-SFP10G-1330-40-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1330nm Max Cable Distance 40km Connector Duplex LC Media SMF

H3C CWDM-SFP10G-1350-20 Compatible LINK-PP 10G SFP+ Specifications Designed for advanced single-mode fiber networks, the CWDM-SFP10G-1350-20 operates as a 10G SFP+ CWDM duplex LC transceiver that pairs a precision 1350nm DFB laser with a PIN photodiode to span 20km distances under a single +3.3V power supply, all while featuring real-time Digital Optical Monitoring (DOM)  for precise optical parameter tracking. H3C Part NumberCWDM-SFP10G-1350-20Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1350nm Max Cable Distance 20km

H3C CWDM-SFP10G-1370-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1370nm, 40km, LC, DOM) The H3C CWDM-SFP10G-1370-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

H3C SFP-GE-LH40-SM1370-CW Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1370nm,40km,DOM,Duplex LC) The H3C SFP-GE-LH40-SM1370-CW Compatible LINK-PP is a high-performance, cost-efficient SFP transceiver designed for single-mode fiber networks. It delivers a data rate of 1.25Gbps with a transmission distance of up to 40km. Built with a CWDM DFB laser transmitter, a PIN photodiode with integrated TIA, and an MCU control module, this unit complies with Class 1 laser safety standards and supports SFP MSA and SFF-8472 digital diagnostic monitoring.   H3C

H3C SFP-GE-LH40-SM1390-CW Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1390nm,40km,DOM,Duplex LC) The H3C SFP-GE-LH40-SM1390-CW Compatible LINK-PP is a high-performance, cost-efficient SFP transceiver designed for single-mode fiber networks. It delivers a data rate of 1.25Gbps with a transmission distance of up to 40km. Built with a CWDM DFB laser transmitter, a PIN photodiode with integrated TIA, and an MCU control module, this unit complies with Class 1 laser safety standards and supports SFP MSA and SFF-8472 digital diagnostic monitoring.   H3C

H3C CWDM-SFP10G-1490-40-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1490nm, 40km, DOM) The H3C CWDM-SFP10G-1490-40-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and

H3C CWDM-SFP10G-1510-80 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1510nm, 80km, LC, DOM) The H3C CWDM-SFP10G-1510-80 Compatible LINK-PP SFP+ module is a high-value, high-performance optical transceiver engineered for 10Gbps signal transfer across up to 80km single-mode fiber links.Its internal hardware is built around three core assemblies: cooled EML laser transmitters, APD photodiodes fitted with TIA preamplifiers, and an MCU control module. All products pass strict Class 1 laser safety certification.Fully compliant with SFP MSA industry standards, this

H3C SFP-GE-LH20-SM1510-CW Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC Optical Transceiver Module (SMF, 1510nm, 20km,DOM) H3C SFP-GE-LH20-SM1510-CW Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring H3C Part NumberSFP-GE-LH20-SM1510-CWVendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1510nm Max

H3C CWDM-SFP10G-1530-80 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1530nm, 80km, LC, DOM) The H3C CWDM-SFP10G-1530-80 Compatible LINK-PP SFP+ optical transceiver delivers premium performance at an economical cost, specially designed to transmit 10G signals up to 80 kilometers over single-mode fiber cables.The module adopts a three-core internal structure, including thermally stabilized EML laser transmitters, APD photodetectors integrated with trans-impedance amplifiers, and an MCU intelligent control unit. Every unit undergoes rigorous testing to meet global

H3C CWDM-SFP10G-1550-40-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1550nm, 40km, DOM) The H3C CWDM-SFP10G-1550-40-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and

H3C SFP-GE-LH40-SM1550-CW Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1550nm,40km,SMF,Duplex LC,DOM) The H3C SFP-GE-LH40-SM1550-CW Compatible LINK-PP module is a high performance, cost effective 1.25G SFP transceiver designed for single mode fiber networks. It supports reliable data transmission up to 40 km using a CWDM DFB laser, with built-in digital diagnostics (SFF-8472) and full compliance with SFP MSA and Class 1 laser safety standards.   H3C Part NumberSFP-GE-LH40-SM1550-CWVendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1550

H3C CWDM-SFP10G-1570-80 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1570nm, 80km, LC, DOM) The H3C CWDM-SFP10G-1570-80 Compatible LINK-PP module is a high-performance 10G SFP+ long-reach optical transceiver designed for stable transmission up to 80km over single-mode fiber. Built with a premium three-core hardware structure, it integrates thermally stabilized EML lasers, high-sensitivity APD photodetectors and an independent MCU control unit to deliver consistent, anti-interference long-haul signal performance. Fully compliant with SFP+ MSA specifications and