HW 0231A4-1350 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1350nm,40km,DOM,Duplex LC) The HW 0231A4-1350 Compatible LINK-PP SFP optical transceiver combines reliable long-haul communication and economical design. Operating at 1.25Gbps over single-mode fiber up to 40km, it integrates a CWDM DFB transmitter, a PIN receiver with trans-impedance preamplifier, and MCU control circuitry. Fully compliant with Class I laser safety regulations, it is compatible with the SFP Multi-Source Agreement and includes complete SFF-8472 digital diagnostics. HW Part Number0231A4

HW 0231A2-1350 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1350nm, 20km,DOM) HW 0231A2-1350 Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring HW Part Number0231A2-1350Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1350nm Max Cable Distance 20

HW 0231A2-1370 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1370nm, 20km,DOM) HW 0231A2-1370 Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring HW Part Number0231A2-1370Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1370nm Max Cable Distance 20

HW 0231A2-1410 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC SMF Optical Transceiver Module for Transmission (SMF, 1410nm, 20km,DOM) HW 0231A2-1410 Compatible LINK-PP Product Features: Supports up to 1.25Gbps bit rates Hot-pluggable SFP footprint CWDM DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring HW Part Number0231A2-1410Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1410nm Max Cable Distance 20

HW 0231A2-1550 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC Optical Transceiver Module (SMF, 1550nm, 20km,DOM) The HW 0231A2-1550 Compatible LINK-PP SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 20kmtransmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

HW 0231A2-1570 Compatible LINK-PP 1.25G SFP CWDM Duplex LC/UPC Optical Transceiver Module (SMF,1570nm,20km,DOM) The HW 0231A2-1570 Compatible LINK-PP SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 20kmtransmission distance with SMF. The transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

HW 0231A4-1590 Compatible LINK-PP 1.25G SFP CWDM Single Mode Optical Transceiver Module(1590nm,40km,SMF,Duplex LC,DOM) The HW 0231A4-1590 Compatible LINK-PP module is a high performance, cost effective 1.25G SFP transceiver designed for single-mode fiber networks. It supports reliable data transmission up to 40 km using a CWDM DFB laser, with built-in digital diagnostics (SFF-8472) and full compliance with SFP MSA and Class 1 laser safety standards.   HW Part Number0231A4-1590Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1590nm Max Cable Distance 40km

HW 25GBase-BX-D4 Compatible LINK-PP 25G SFP28 Specifications 25GBase-BX-D4 operates as a 25G SFP28 BiDi single-mode optical transceiver module, delivering reliable 40km connectivity over 1310nm-TX/1270nm-RX wavelengths within a 0 to 70°C commercial temperature envelope. HW Part Number25GBase-BX-D4Vendor NameLINK-PP Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm-TX/1270nm-RX Max Cable Distance 40km Connector Simplex LC Media SMF Transmitter Type DFB Receiver Type APD TX Power -1 to +7dBm RX Power -15 to +3dBm

HW DWDM-Sfp10G-1554-94-I Compatible LINK-PP C28 10G SFP+ Specifications DWDM-Sfp10G-1554-94-I functions as an industrial-grade 10G SFP+ DWDM transceiver operating at a 1554.94nm (C28) wavelength, incorporating a duplex LC interface, real-time DOM diagnostics, and 40km SMF transmission support over an extended temperature range of -40 to +85°C.  HW Part NumberDWDM-Sfp10G-1554-94-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1554.94nm  Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type

HW SFP-10G-ZDWT-53.32 Compatible LINK-PP C30 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1553.32nm, 80km, Duplex LC, DOM) The HW SFP-10G-ZDWT-53.32 Compatible LINK-PP SFP+ DWDM optical transceiver delivers stable 10Gbps signal transmission up to 80km over single-mode fiber. Built with a three-part internal architecture, the module integrates a cooled EML laser transmitter, APD photodiode paired with a trans-impedance preamplifier (TIA), and an MCU control unit. Every unit complies with Class 1 international laser safety standards. Fully compliant with the SFP Multi-Source Agreement,

HW SFP-10G-ZDWT-52.52 Compatible LINK-PP C31 10G SFP+ DWDM 100GHz Transceiver Module (SMF, 1552.52nm, 80km, Duplex LC, DOM) The HW SFP-10G-ZDWT-52.52 Compatible LINK-PP SFP+ DWDM optical transceiver delivers stable 10Gbps signal transmission up to 80km over single-mode fiber. Built with a three-part internal architecture, the module integrates a cooled EML laser transmitter, APD photodiode paired with a trans-impedance preamplifier (TIA), and an MCU control unit. Every unit complies with Class 1 international laser safety standards. Fully compliant with the SFP Multi-Source Agreement,

HW DWDM-SFP10G-1550-12-I Compatible LINK-PP C34 10G SFP+ Specifications DWDM-SFP10G-1550-12-I DWDM module combines a C34 1550.11nm ITU-grid wavelength with a cooled EML laser and PIN photodiode setup, establishing 10Gbps optical links via duplex LC connectors across 40km of single-mode fiber with full DDM diagnostic support from -40 to +85°C. HW Part NumberDWDM-SFP10G-1550-12-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1550.11nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML

HW SFP-10G-ZDWT-46.12 Compatible LINK-PP C39 10G SFP+ DWDM Optical Transceiver Module (SMF, 1546.12nm, 80km, Duplex LC, DOM) Designed for long-haul single-mode fiber communication, HW SFP-10G-ZDWT-46.12 Compatible LINK-PP DWDM SFP+ optical transceiver sustains consistent 10Gbps signal transmission up to 80 kilometers. The three-tier internal hardware setup features temperature-controlled EML laser, APD receiver integrated with TIA trans-impedance amplifier and independent MCU control circuit, passing all Class 1 laser safety certifications. Fully SFP MSA standardized, it integrates SFF-

HW eSFP-GE-SX-MM850 Compatible LINK-PP 1G SFP Specifications The HW eSFP-GE-SX-MM850 Compatible LINK-PP module is an industrial-grade 1G SFP transceiver engineered for reliable Gigabit Ethernet over multi-mode fiber. Operating at an 850nm wavelength, it supports transmission distances up to 550 meters via duplex LC interfaces. This hot-pluggable module features digital optical monitoring (DOM) and thrives in harsh environments from -40°C to +85°C. HW Part NumbereSFP-GE-SX-MM850Vendor NameLINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength

HW SFP-10G-ZDWT-28.77 Compatible LINK-PP C61 10G SFP+ DWDM Optical Transceiver Module (SMF, 1528.77nm, 80km, Duplex LC, DOM) The HW SFP-10G-ZDWT-28.77 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement

HW SFP-10G-ZDWT-29.55 Compatible LINK-PP C60 10G SFP+ DWDM Optical Transceiver Module (SMF, 1529.55nm, 80km, Duplex LC, DOM) The HW SFP-10G-ZDWT-29.55 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement