LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, telecom, and data

LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

LINK-PP LP-RJ45TG-8YC 10GBase-T SFP+ Transceiver Module(Copper, 80m, RJ45)LP-RJ45TG-8YC Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 80 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol. LINK-PP Part Number LP-RJ45

LINK-PP LP-RJ45TG-3YC 10GBase-T SFP+ Transceiver Module(Copper, 30m, RJ-45)LP-RJ45TG-3YC Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . This SFP+ transceiver provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector,They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T /1000base-T/100base-Tx / 10base-Te standards as specified in IEEE Std 802.3 . LINK-PP Part Number LP-RJ45TG-3YC Vendor Name LINK-PP Part Status

HPE Aruba 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC Compatible LINK-PP LQ-CW40-LR4C（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Vendor Name LINK-PP Form Factor QSFP+ Max Data Rate

LINK-PP LQ-CW40-LR4C 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Vendor Name LINK-PP Form Factor QSFP+ Max Data Rate 40Gbps

Extreme 10335 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

Extreme 10338 Compatible LINK-PP LP-RJ45TG-3YC 10GBase-T SFP+ Transceiver Module(Copper, 30m, RJ45)LP-RJ45TG-3YC Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . This SFP+ transceiver provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector,They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T /1000base-T/100base-Tx / 10base-Te standards as specified in IEEE Std 802.3 . LINK-PP Part Number LP-RJ45TG-3YC Extreme Part Number 10338

Brocade 40G-QSFP-ER4 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

Extreme 40GB-LR4-QSFP Compatible LINK-PP LQ-CW40-LR4C 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Extreme Part Number 40GB-LR4-QSFP Form Factor

Avago AFBR-725SMZ Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Avago AFBR-725SMZ  SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G

Alcatel-Lucent QSFP-40G-ER Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them

Alcatel-Lucent QSFP-40G-LR Compatible LINK-PP LQ-CW40-LR4C 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km）The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4C Alcatel-Lucent Part Number QSFP-40G-LR Form Factor

Arista Networks SFP-25G-SR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Arista Networks SFP-25G-SR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 2

Arista QSFP-40G-ER4 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

Arista Networks SFP-10GE-T80 Compatible LINK-PP LP-RJ45TG-8YC 10GBase-T SFP+ Transceiver Module(Copper, 80m, RJ45)Arista SFP-10GE-T80 compatible SFP+ transceiver provides 10GBase-T throughput up to 80m over cat6a/cat7 copper cable via RJ-45 connector. LP-RJ45TG-8YC Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 80 meters reach over unshielded twisted-pair category 6a/7 cables.  LINK-PP