H3C J9151A Compatible LINK-PP LS-SM3110-10C SFP+ 10GBASE-LR Optical Transceiver Module Duplex LC/UPC  (SMF,1310nm,10km,DOM)The LS-SM3110-10C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics

H3C SFP-25G-SR-MM850-I Compatible LINK-PP LS-MM8525-S1I SFP28 25GBASE-SR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 100m,DOM,Industrial)The LS-MM8525-S1I SFP28 transceiver provides 25GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, data center, and 5G Wireless Network, suitable for both outdoor and indoor deployments. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard. LINK-PP

H3C JD092B Compatible LINK-PP LS-MM3110-S2C 10GBASE-LRM SFP+ Optical Transceiver Module (MMF/SMF, 1310nm, 220m/300m, LC, DOM)The LS-MM3110-S2C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 220m transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics

H3C SFP-XG-ZR100-SM1550-I Compatible LINK-PP LS-SM5510-A0I 10GBASE-ZR SFP+ Optical Transceiver Module (SMF, 1550nm, 100km, LC, DOM, Industrial)The LS-SM5510-A0I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

H3C SFP-XG-SX-MM850-A Compatible LINK-PP LS-MM8510-S3C 10GBASE-SR SFP+ Transceiver Module (MMF, 850nm, 300m, LC, DOM)The LS-MM8510-S3C SFP+transceivers are high performance,cost effective modules supporting data rate of 10.3Gbps.The transceiver consists of three sections: a VCSEL laser transmitter,a PIN photo diode integrated with a transimpedance preamplifier(TIA) and MCU control unit.All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions. LINK-PP

H3C SFP-XG-LR-SM1310 Compatible LINK-PP LS-SM3110-10C SFP+ 10GBASE-LR Optical Transceiver Module Duplex LC/UPC  (SMF,1310nm,10km,DOM)The LS-SM3110-10C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

H3C JH419A Compatible LINK-PP LQ-SW100-SR4C 100GBASE QSFP28 SWDM4 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The H3C JH419A 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. LINK-PP Part Number LQ-SW100-SR4C H3C Part Number JH419A Form

H3C SFP-25G-SR-MM850 Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The H3C SFP-25G-SR-MM850  SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G

H3C QSFP-100G-SR4-MM850 Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The H3C QSFP-100G-SR4-MM850 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C H3C Part Number  QSFP-100G-SR4-MM850 Form Factor

H3C QSFP-40G-ER4-SM1310 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

H3C QSFP-100G-ER4L-WDM1300 Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28  Duplex LC Optical Transceiver Module (SMF, 1310nm, 40km, DOM)H3C QSFP-100G-ER4L-WDM1300 QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C H3C Compatible QSFP-100G-ER4L-WDM1300

H3C QSFP-100G-LR4L-WDM1300 Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C H3C Part Number  QSFP-100G-LR4L-WDM1300

H3C QSFP-100G-LR4-WDM1300 Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C H3C Part Number QSFP-100G-LR4-WDM1300 Form Factor QSFP28 Max Data

HP BladeSystem 455883-B21 Compatible LINK-PP LS-MM8510-S3C 10GBASE-SR SFP+ Transceiver Module (MMF, 850nm, 300m, LC, DOM)The LS-MM8510-S3C SFP+transceivers are high performance,cost effective modules supporting data rate of 10.3Gbps.The transceiver consists of three sections: a VCSEL laser transmitter,a PIN photo diode integrated with a transimpedance preamplifier(TIA) and MCU control unit.All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

HPE CWDM-SFP10G-1610 Compatible LINK-PP LS-CW6110-40C SFP+ 10G CWDM Duplex LC/UPC Optical Transceiver Module for Transmission (SMF, 1610nm, 40km, DOM)The HPE CWDM-SFP10G-1610 SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source

HPE CWDM-SFP10G-1590 Compatible LINK-PP LS-CW5910-40C SFP+ 10G CWDM Duplex LC/UPC Optical Transceiver Module for Transmission (SMF, 1590nm, 40km, DOM)The HPE CWDM-SFP10G-1590 SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source