Cisco QSFP-40G-ER4 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

Cisco QSFP-100G-ER4L-S Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28 Duplex LC Optical Transceiver Module(SMF, 1310nm, 40km, DOM)Cisco QSFP-100G-ER4L-S Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C Cisco Part Number QSFP-100G-ER4L-S

Cisco QSFP-100G-CWDM4-S Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number: LQ-CW100-FR4C Cisco Part Number QSFP-100G-CWDM4-S

Cisco QSFP-100G-LR4-S Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C Cisco Part Number QSFP-100G-LR4-S Form Factor QSFP28 Max Data Rate

HW 02311KNR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The HW 02311KNR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25

Arista 100GBASE-CWDM4-QSFP28 Compatible LINK-PP LQ-CW100-FR4I 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM, Industrial)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4I Arista Compatible 100GBASE-CWDM4-QSFP28 

Extreme 10302-I Compatible LINK-PP LS-SM3110-10I SFP+ 10GBASE-LR Optical Transceiver Module (SMF,1310nm,10km,LC, Industrial,DOM)The LS-SM3110-10I SFP+ transceivers are high performance(with TX&RX CDR), cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-84

Extreme 10309 Compatible LINK-PP LS-SM3110-40C SFP+ 10GBASE-ER Optical Transceiver Module (SMF, 1310nm, 40km, LC, DOM)The LS-SM3110-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics

Extreme 10339 Compatible LINK-PP LP-RJ45TG-8YC 10GBASE-T SFP+ Transceiver Module(Copper, 80m, RJ45)LP-RJ45TG-8YC Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 80 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol. LINK-PP

Brocade 10G-SFPP-BXD-I Compatible LINK-PP LS-BL332710-10I SFP+ 10GBASE-BX10-D Simplex LC/UPC SMF Optical Transceiver Module (SMF, 1330nm-TX/1270nm-RX, 10km, LC, DOM,Industrial)The LS-BL332710-10I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Brocade 10G-SFPP-BXU-40K Compatible LINK-PP LS-BL273310-40C SFP+ 10GBASE-BX40-U BiDi  Simplex LC/UPC SMF Optical Transceiver Module(SMF, 1270nm-TX/1330nm-RX, 40km,DOM)The LS-BL273310-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Brocade 10G-SFPP-ER Compatible LINK-PP LS-SM5510-40C 10GBASE-ER Duplex LC/UPC SFP+ Optical Transceiver Module (SMF, 1550nm,40km,DOM)The LS-SM5510-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Brocade 10G-SFPP-ER40 Compatible LINK-PP LS-SM3110-40C SFP+ 10GBASE-ER Optical Transceiver Module (SMF, 1310nm, 40km, LC, DOM)The LS-SM3110-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

Extreme 10GB-BX20-U-I Compatible LINK-PP LS-BL273310-20I SFP+ 10GBASE-BX20-U Simplex LC/UPC Optical Transceiver Module(SMF, 1270nm-TX/1330nm-RX, 20km, LC, DOM,Industrial)The LS-BL273310-20I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Extreme 10GB-BX60-U Compatible LINK-PP LS-BL273310-60C SFP+ 10GBASE-BX60-U BiDi Simplex Optical Transceiver Module(SMF, 1270nm-TX/1330nm-RX, 60km, LC, DOM)The LS-BL273310-60C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 60km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and

Extreme 10GB-ZR100-SFPP Compatible LINK-PP LS-SM5510-A0C 10GBASE-ZR SFP+ Optical Transceiver Module (SMF, 1550nm, 100km, LC, DOM)The LS-SM5510-A0C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-847