Juniper EX-SFP-10GE-BX45-100 Compatible LINK-PP LS-BL495510-A0C SFP+ 10GBASE-BX100-U BiDi Simplex Optical Transceiver Module(SMF, 1490nm-TX/1550nm-RX 100km, LC, DOM)The Juniper Networks EX-SFP-10GE-BX45-100 SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers

Juniper Networks C39 SFPP-10G-DW39-I Compatible LINK-PP LS-DW3910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.12nm, 40km, LC, Industrial, DOM)The Juniper Networks C39 SFPP-10G-DW39-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C38 SFPP-10G-DW38-I Compatible LINK-PP LS-DW3810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.92nm, 40km, LC, Industrial, DOM)The Juniper Networks C38 SFPP-10G-DW38-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C37 SFPP-10G-DW37-I Compatible LINK-PP LS-DW3710-40I 10G DWDM SFP+ Transceiver Module (SMF, 1547.72nm, 40km, LC, Industrial, DOM)The Juniper Networks C37 SFPP-10G-DW37-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C36 SFPP-10G-DW36-I Compatible LINK-PP LS-DW3610-40I 10G DWDM SFP+ Transceiver Module (SMF, 1548.51nm, 40km, LC, Industrial, DOM)The Juniper Networks C36 SFPP-10G-DW36-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C35 SFPP-10G-DW35-I Compatible LINK-PP LS-DW3510-40I 10G DWDM SFP+ Transceiver Module (SMF, 1549.32nm, 40km, LC, Industrial, DOM)The Juniper Networks C35 SFPP-10G-DW35-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C34 SFPP-10G-DW34-I Compatible LINK-PP LS-DW3410-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.12nm, 40km, LC, Industrial, DOM)The Juniper Networks C34 SFPP-10G-DW34-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C33 SFPP-10G-DW33-I Compatible LINK-PP LS-DW3310-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.92nm, 40km, LC, Industrial, DOM)The Juniper Networks C33 SFPP-10G-DW33-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C32 SFPP-10G-DW32-I Compatible LINK-PP LS-DW3210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1551.72nm, 40km, LC, Industrial, DOM)The Juniper SFPP-10G-DW32-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Juniper Networks C30 SFPP-10G-DW30-I Compatible LINK-PP LS-DW3010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1553.33nm, 40km, LC, Industrial, DOM)The Juniper Networks C30 SFPP-10G-DW30-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C29 SFPP-10G-DW29-I Compatible LINK-PP LS-DW2910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1554.13nm, 40km, LC, Industrial, DOM)The Juniper Networks C29 SFPP-10G-DW29-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is

Juniper Networks C22 SFPP-10G-DW22-I Compatible LINK-PP LS-DW2210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1559.79nm, 40km, LC, DOM, Industrial)The Juniper SFPP-10G-DW22-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to

Juniper Networks C21 SFPP-10G-DW21-I Compatible LINK-PP LS-DW2110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1560.61nm, 40km, LC, DOM, Industrial)The Juniper SFPP-10G-DW21-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to

Juniper Networks C20 SFPP-10G-DW20-I Compatible LINK-PP LS-DW2010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1561.41nm, 40km, LC, DOM, Industrial)The Juniper SFPP-10G-DW20-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to

Juniper Networks C19 SFPP-10G-DW19-I Compatible LINK-PP LS-DW1910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1562.23nm, 40km, LC, DOM, Industrial)The Juniper SFPP-10G-DW19-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to

Juniper Networks C18 SFPP-10G-DW18-I Compatible LINK-PP LS-DW1810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1563.05nm, 40km, LC, DOM, Industrial)The Juniper SFPP-10G-DW18-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to