CWDM-SFP-1290 operates as a 1290nm CWDM SFP module that sustains 1.25Gbps data rates over a single-mode fiber reach of 80km, built around a DFB laser and a PIN photodiode. The thermal range spans 0 to +70°C, while integrated digital monitoring furnishes real-time optical parameters — bias current, temperature, voltage, and optical power — with calibrated accuracy.
Dell Part Number
CWDM-SFP-1290
Vendor Name
LINK-PP
Form Factor
SFP
Max Data Rate
1.25Gbps
Wavelength
1290nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
DFB
Receiver Type
PIN
TX Power
-1 to +4dBm
RX Power
-26 to -1dBm
Receiver Sensitivity
-26dBm
Receiver Overload
-1dBm
EMC (Electromagnetic Compatibility)
Supported
DOM Support
Yes
Operating Temperature Range
0 to 70°C
Protocols
SFP MSA、SFF-8472
Key Features of Dell CWDM-SFP-1290 Compatible LINK-PP 1.25G SFP
Dell CWDM-SFP-1290 Compatible LINK-PP module is a commercial-grade 1290nm CWDM SFP module that delivers 1Gbps data rates over single-mode fiber up to 80km. It incorporates a duplex LC optical interface, real-time digital optical monitoring (DOM), and full compliance with the SFP MSA standard. The hot-pluggable form factor enables easy installation and field replacement without system interruption.
This optical module adopts the standard hot-pluggable SFP footprint, allowing direct insertion into any SFP-compliant port. Its electrical and mechanical interfaces are fully aligned with the SFP MSA, ensuring interoperability with a wide range of host equipment.
CWDM-SFP-1290: 1 Gbps Connectivity for Regional Long-Haul Links
Designed for regional long-haul backbones, this transceiver provides a 1Gbps throughput over extended network spans. Its stable data rate ensures that traffic flows smoothly across point-to-point trunks, with minimal variation in latency under normal operating conditions.
CWDM-SFP-1290 Module with CWDM Technology for Fiber Efficiency
The CWDM approach multiplexes multiple wavelength channels onto a single fiber, significantly reducing the need for additional fiber strands. This technology maximizes existing infrastructure capacity, lowering both deployment costs and cable plant complexity.
CWDM-SFP-1290 Module with 1290nm Wavelength
The 1290nm wavelength sits within the CWDM spectrum and delivers a good combination of relatively low dispersion and manageable loss over single-mode fiber. Its adoption leverages the inherent optical properties of this band, supporting clean eye patterns and stable power budgets for the link.
CWDM-SFP-1290 Module Supporting 80km Transmission
The transmission distance reaches up to 80km over single-mode fiber without requiring external amplification or dispersion compensation. This reach is achieved through the DFB laser’s optical output power and the PIN receiver’s sensitivity, ensuring reliable link closure at the specified bit rate.
CWDM-SFP-1290 Module with Duplex LC Interface
The duplex LC connector provides a compact, snap-in locking mechanism that ensures secure fiber mating and low insertion loss. This industry-standard interface facilitates quick patching and is compatible with most optical distribution frames and patch panels.
CWDM-SFP-1290 Module with DOM for Real-Time Monitoring
The DOM (Digital Optical Monitoring) function continuously tracks key operating parameters, including transmitter bias current, receiver optical power, supply voltage, and internal temperature. These real-time readings allow network administrators to proactively detect link degradation and troubleshoot faults remotely via the host management bus.
The CWDM-SFP-1290 1G SFP module complies with major international industry standards, including ISO 9001, CE, RoHS, and FCC. These certifications confirm that the manufacturing process meets strict quality, electromagnetic safety, and environmental protection requirements.
Every transceiver module undergoes rigorous hardware evaluations, including the eye pattern test, bit error rate test, and temperature test. These procedures verify signal integrity and operational stability under varying working conditions.
CWDM-SFP-1290 Quality Certifications
Official compliance documentation confirms the optical module meets rigorous safety, environmental, and quality control benchmarks. These industry credentials ensure the product satisfies all standard regulatory requirements for commercial deployment.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
CWDM-SFP-1290 Certified for Reliable Host-Device Compatibility
The transceiver's EEPROM is pre-programmed and validated across various network switches, routers, and media converters. This process ensures accurate hardware recognition and stable data link establishment upon installation.
Rigorous Testing Ensures Reliable SFP Performance
Every CWDM-SFP-1290 1G SFP transceiver undergoes strict physical-layer checks to guarantee signal stability. Discover the complete validation methodology at the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength and spectral width to ensure compliance with optical standards.
Eye Pattern Test
Analyze optical signal quality and noise margins to confirm clean waveform transmission.
Bit Error Rate Test
Evaluate data transmission accuracy under full line-rate traffic to prevent packet loss.
Temperature Test
Verify operational stability and thermal tolerance across specified operating temperature ranges.
Product Shipping for Dell CWDM-SFP-1290 Compatible LINK-PP 1.25G SFP
Orders are securely packaged and handled to protect CWDM-SFP-1290 1G SFP optical transceivers during transit. Reliable delivery channels ensure products arrive safely at global destinations.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage during handling and transport.
Shock-Resistant Transport Protection
Absorb mechanical impacts during transit to safeguard internal components.
Fast Order Processing and Dispatch
Prepare and dispatch inventory promptly to minimize fulfillment lead times.
Global Logistics and International Delivery
Partner with reliable international carriers to provide secure and efficient shipment.
Plug the CWDM-SFP-1290 module into your switch port, attach single-mode fiber LC patch cords, and verify port status. Optimized for long-reach CWDM applications, it transmits specific 1290nm optical channels to maximize bandwidth capacity across long-distance regional trunking and campus interconnects.
CWDM-SFP-1290 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal CWDM-SFP-1290 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
No. CWDM uses 20nm optical channel spacing to keep each wavelength physically isolated. The transceiver performs purely physical optical-electrical conversion with zero packet buffering, ensuring zero cross-talk and ultra-low, protocol-independent latency for both SAN and Ethernet links. By
admin
A:
Absolutely. The module features a hot-pluggable SFP footprint, allowing live insertion or replacement in active switches or media converters without disrupting adjacent ports or requiring chassis reboots. By
admin
A:
Under typical operating conditions (0 to 70°C), the internal DFB laser maintains wavelength stability strictly within the ITU-T G.694.2 CWDM grid tolerance (±6.5nm at 1290nm), even in fully populated switch panels, ensuring no out-of-spec drift. By
admin
A:
The LS-CW291G-80C CWDM module strictly complies with the ITU-T G.694.2 grid (1290nm ±6.5nm spectral window). It integrates seamlessly into 20nm-spaced CWDM Mux/Demux filters. In link budget planning, you should allocate 1.5 to 3.0 dB per side for Mux/Demux insertion loss, plus roughly 0.5 dB per patch panel. By
admin
A:
Yes. We can pre-code the transceivers for your specific switch brands prior to dispatch and archive your custom coding profile. This guarantees seamless, plug-and-play compatibility across all your POP deployments without triggering port errors. By
admin
Bought a batch for a small ISP backhaul; the duplex LC interface mates cleanly with our existing patch panels and the 80km rating gives us plenty of margin on 60-75km runs.
Please write comments with more than three
character.
492498
450034
R***e
Argentina
Verified
Purchase
5 .0
2026-02-10
Ordered a pair of these 1290nm CWDM SFP modules for a remote warehouse link spanning roughly 58km. Bit error rate has been rock-solid over the past three weeks, and optical budget headroom is plenty over OS2 single-mode fiber.
Please write comments with more than three
character.
492498
450036
L***n
Brazil
Verified
Purchase
5 .0
2026-01-22
In a private enterprise network, we used these SFPs to extend 1G connectivity between buildings using a simple CWDM mux/demux pair. The optical performance has been consistent across all deployed units, with clean link establishment and no unexpected resets. Having DOM available on every port simplifies troubleshooting and reduces the need for external test gear during changes. The 80km class rating means we can reuse the same stock for both short and medium-distance links without worrying about spec mismatches.
Please write comments with more than three
character.
492498
450030
P***m
Iran, Islamic Republic of
Verified
Purchase
5 .0
2025-09-26
For a cost-effective 1G CWDM SFP, the build quality feels good; labeling is clear (P/N LS-CW291G-80C, 1290nm) and the form factor fits standard SFP cages.
Please write comments with more than three
character.
492498
450035
Z***y
Libyan Arab Jamahiriya
Verified
Purchase
5 .0
2025-08-21
We use these LS-CW291G-80C modules for our 1G CWDM ring across several buildings; 1290nm channel fits our MUX plan perfectly and the DOM data helps us track link health without extra tools.
Please write comments with more than three
character.
492498
450028
K***d
Mexico
Verified
Purchase
4 .0
2025-04-03
Excellent 80km CWDM SFP module with clean DOM data; the only hiccup was that the customs paperwork had a minor typo in the description. It didn’t affect the product, but it did delay clearance by a day. Everything else was perfect.
Please write comments with more than three
character.
492498
450041
M***y
Canada
Verified
Purchase
5 .0
2025-03-19
We used a pair of these LS-CW291G-80C 1G CWDM optical transceivers to connect two 1G switches over a dedicated SMF path for a critical NAS and backup network. The duplex LC interface made cabling clean and predictable, and DOM let us validate the entire link budget end-to-end. Under continuous file transfers and virtualization traffic, the connection stayed stable with no drops or retransmissions. It’s reassuring to have optical monitoring built in, so we can spot degradation before it becomes an outage. For a small but important fiber segment, this module hits the right balance of performance and price.
Please write comments with more than three
character.
492498
450039
O***y
United States
Verified
Purchase
5 .0
2024-11-26
Integrated these into our regional CWDM passive filter system. Clean 1290nm pass-through with minimal insertion loss, and DOM temperature values stay stable inside indoor rack environments.
Please write comments with more than three
character.
492498
450029
L***y
Morocco
Verified
Purchase
5 .0
2024-10-22
For a commercial-temp (0-70°C) indoor deployment, these SFPs have been rock solid; TX power sits around -1 to +4 dBm and receiver sensitivity down to -26 dBm as specified.
Please write comments with more than three
character.
492498
450032
N***s
United Kingdom
Verified
Purchase
5 .0
2024-10-11
We rolled these 1G CWDM 1290nm SFP transceiver modules into a multi-site campus ring, and the links have been rock solid under real production load. DOM telemetry gives our NOC clear visibility without extra probes, and the 80km class rating covers all our current and planned hops. Deployment was straightforward with standard duplex LC patching on SMF, and we haven’t seen any flapping or error spikes. The commercial temperature range fits our climate-controlled rooms perfectly. For a cost-effective CWDM transceiver, the stability and monitoring capabilities are exactly what we needed.
United States · English · USD
