LINK-PP LP-SFP-TM8I 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Industrial Transceiver Module The LINK-PP LP-SFP-TM8I is a high-performance, industrial-grade copper SFP transceiver operating over an SGMII interface. Powered by the Realtek RTL8213B chip, it supports 10/100/1000Mbps auto-negotiation and delivers reliable full-duplex links up to 100 meters over Category 5 UTP cabling. It features integrated Tx-disable and Rx_los functions as standard. LINK-PP Part Number LP-SFP-TM8I Vendor Name LINK-PP Part Status Active Form Factor SFP SGMII Max. Data Rate 1000

LINK-PP LP-SFP-TM8C 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module The LINK-PP LP-SFP-TM8C SFP Copper Transceiver 10/100/1000Base-T or 1000Base-T only SFP Copper Transceiver is high performance, cost effective module, compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mb/s data-rate up to 100 meters reach over twisted-pair category 5 cable. LINK-PP Part Number LP-SFP-TM8C Vendor Name LINK-PP Part Status Active Form Factor SFP SGMII Max. Data Rate 100

LINK-PP LS-MM311G-02AC 1.25G SFP 1310nm 2km Duplex LC MMF Transceiver Module (Customized) The LINK-PP LS-MM311G-02AC SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 2km transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.  

LINK-PP LS-MM311G-02AI 1.25G SFP Industrial 1310nm 2km Duplex LC MMF Transceiver Module (Customized) The LINK-PP LS-MM311G-02AI SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 2km transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

LINK-PP LS-SM5506-40C 622M SFP Transceiver Module (SMF, 1550nm, 40km, LC, DOM) The LINK-PP LS-SM5506-40C SFP transceivers are high performance, cost effective modules supporting data rate of 622Mbps and 40km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions. LINK-PP Part

LINK-PP LP-1G-TC 1000BASE-T SFP Transceiver Module(Copper, 100m, RJ-45) The LINK-PP LP-1G-TC Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data-rate up to 100 meters reach over unshielded twisted-pair category 5 cable（BER <10-12）. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. The module provides standard serial ID information

LINK-PP LS-MM851G-02I 1G SFP Specifications LS-MM851G-02I operates as an industrial-grade 1G SFP optical module that transmits at an 850nm wavelength across a 2km range via 50/125µm MMF, maintaining full compliance with SFP MSA and SFF-8472 protocols while enduring extreme temperatures from -40 to +85°C. LINK-PP Part Number LS-MM851G-02I Vendor Name LINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 850nm Max Cable Distance 2km Connector Duplex LC Media MMF Transmitter Type VSCEL Receiver Type PIN TX Power -9

LINK-PP LS-MM851G-02C 1G SFP Specifications LS-MM851G-02C operates as a 1G multi-mode SFP optical module that handles reliable 2km data transmissions over 50/125µm MMF at an 850nm wavelength, featuring real-time digital diagnostic monitoring across a standard 0 to +70°C temperature range. LINK-PP Part Number LS-MM851G-02C Vendor Name LINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 850nm Max Cable Distance 2km Connector Duplex LC Media MMF Transmitter Type VSCEL Receiver Type PIN TX Power -9 to 0dBm RX

LINK-PP LP-RJ451GE-YSI 10/100/1000BASE-T SFP Specifications LP-RJ451GE-YSI acts as an industrial-grade 10/100/1000BASE-T SFP copper module engineered for extreme environments, sustaining deterministic network links up to 100m over Category 5 twisted-pair cabling while effortlessly adapting to diverse host systems via its dual-architecture support for SERDES (at native 1000BASE-T) and SGMII (at 10/100/1000Mbps multi-rate compliance) across an operating temperature spectrum of -40°C to +85°C. LINK-PP Part Number LP-RJ451GE-YSI Vendor Name LINK-PP Part

LINK-PP LP-RJ451GE-RCI 10/100/1000BASE-T SFP Specifications LP-RJ451GE-RCI is an industrial-grade 10/100/1000BASE-T SFP copper transceiver module that features low power consumption, a fully metallic enclosure to reduce EMI, and a 100-meter transmission range over Cat 5 cable in extreme temperatures from -40°C to +85°C. LINK-PP Part Number LP-RJ451GE-RCI Vendor Name LINK-PP Part Status Active Form Factor SFP SGMII Max. Data Rate 1.25G Max. Cable Distance 100m Media Cat 5 Connector RJ-45 RX_LOS Yes DOM Support No

LINK-PP LP-SFP-MS8I 1000BASE-T SFP Specifications LP-SFP-MS8I is an industrial-grade 1000BASE-T SFP copper transceiver module engineered for host systems with a SERDES interface, driving data reliably across 100m of Category 5 twisted-pair cabling with a typical power dissipation of just 1.05W while enduring extreme thermal envelopes from -40°C to +85°C. LINK-PP Part Number LP-SFP-MS8I Vendor Name LINK-PP Part Status Active Form Factor SFP Max. Data Rate 1.25G Max. Cable Distance 100m Media Cat 5 Connector RJ-45 Rx LOS NO DDM/

LINK-PP LP-SFP-MS8C 1000BASE-T SFP Specifications LP-SFP-MS8C is a commercial-grade 1000BASE-T copper SFP transceiver module engineered for efficient gigabit connectivity up to 100m over Cat 5 cabling, featuring a compact RJ-45 connector and an eco-conscious design that draws a typical low power dissipation of just 1.05W while housing its circuitry in a fully metallic enclosure to guarantee low electromagnetic interference across its 0°C to 70°C operating temperature range. LINK-PP Part Number LP-SFP-MS8C Vendor Name LINK-PP Part Status Active Form

LINK-PP LP-SFP-TMRC 10/100/1000BASE-T SFP Specifications Designed as a 10/100/1000BASE-T copper SFP transceiver, the LP-SFP-TMRC integrates a hot-pluggable footprint and a compact RJ-45 connector assembly to efficiently bridge reliable 100-meter data links over standard Cat 5 twisted-pair cabling across a 0 to 70°C operating temperature range, all while drawing an exceptionally lean typical power dissipation of just 1.05W. LINK-PP Part Number LP-SFP-TMRC Vendor Name LINK-PP Part Status Active Form Factor SFP SGMII Max. Data Rate 1000Mbps Max.

LINK-PP LS-CW611G-80C 1G SFP Specifications LS-CW611G-80C stands out as an advanced 1G SFP CWDM optical transceiver module engineered to expand network boundaries. Operating at a precise 1610nm wavelength, it integrates a dependable CWDM DFB laser alongside a sensitive PIN photodiode. Furthermore, the unit supports seamless single-mode fiber (SMF) transmission up to 80km, complemented by real-time digital diagnostic monitoring for complete link oversight. LINK-PP Part Number LS-CW611G-80C Vendor Name LINK-PP Form Factor SFP Max Data Rate 1.25Gbps

LINK-PP LS-CW591G-80C 1G SFP Specifications LS-CW591G-80C functions as a 1G CWDM SFP optical transceiver designed with a 1590nm DFB laser transmitter and PIN photodetector. This module facilitates long-reach data links up to 80km utilizing standard single-mode fiber. It also supports real-time digital diagnostic monitoring interfaces for proactive optical link management. LINK-PP Part Number LS-CW591G-80C Vendor Name LINK-PP Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1590nm Max Cable Distance 80km Connector Duplex LC Media SMF

LINK-PP LS-CW571G-80C 1.25G SFP CWDM Optical Transceiver Module(1570nm,80km,SMF,Duplex LC,DDM) The LINK-PP LS-CW571G-80C SFP transceiver consists of three sections: a CWDM DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit.The transceiver is high performance, cost effective modules supporting data rate of 1.25Gbps and 80km transmission distance with SMF.  All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics