Juniper EX-SFP-10GE-CWE27-I Compatible LINK-PP 10G SFP+ Specifications The Juniper EX-SFP-10GE-CWE27-I Compatible LINK-PP 10G SFP+ optical transceiver module supports data rates of up to 10.7Gbps over single-mode fiber (SMF) and has a transmission range of up to 40km at a wavelength of 1270nm. Juniper Part NumberEX-SFP-10GE-CWE27-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1270nm Max Cable Distance 40km Connector Duplex LC Media SMF Transmitter Type EML Receiver Type PIN TX Power -1 to +5dBm RX Power -23

H3C CWDM-SFP10G-1290-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1290nm, 40km, LC, DOM) The H3C CWDM-SFP10G-1290-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

H3C CWDM-SFP10G-1290-20 Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-1290-20 standardizes 20km single-mode fiber links utilizing a 1290nm CWDM architecture, blending a hot-swappable 10G SFP+ form factor with advanced DFB/PIN optical components and real-time DDM diagnostics. Engineered for high-density networking, this transceiver delivers low-latency 10Gbps data transmission, full LC duplex connectivity, and reliable SFF-8472 compliance for seamless operational monitoring in enterprise and telecom infrastructures. H3C Part NumberCWDM-SFP10G-1290-20Vendor

Ciena CWDM-SFP10G-1310 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1310nm, 40km, LC, DOM) The Ciena CWDM-SFP10G-1310 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Generic CWDM-SFP10G-20SP Compatible LINK-PP 10G SFP+ Specifications This Generic CWDM-SFP10G-20SP Compatible LINK-PP hot-swappable SFP+ module enables the rapid deployment of reliable connectivity for LINK-PP-compatible devices with a data rate of 10.7 Gbps, a precise wavelength of 1330 nm, and a transmission reach of 20 km. Generic Part NumberCWDM-SFP10G-20SPVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1330nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX

Juniper EX-SFP-10GE-CWE35 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1350nm, 40km, LC, DOM) The Juniper EX-SFP-10GE-CWE35 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Cisco CWDM-SFP10G-1350-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (SMF, 1350nm, 40km, Industrial, DOM) The Cisco CWDM-SFP10G-1350-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and

Generic CW-SFP10G40-37 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1370nm, 40km, LC, DOM) The Generic CW-SFP10G40-37 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Brocade XBR-SFP10G1370-20 Compatible LINK-PP 10G SFP+ Specifications The XBR-SFP10G1370-20 anchors high-speed 10G optical networks as a hot-pluggable CWDM SFP+ transceiver, transmitting up to 20km over single-mode fiber (SMF) via LC duplex connectors at a 1370nm wavelength. Operating on a single +3.3V power supply, this module integrates digital diagnostic monitoring (DDM) to deliver continuous real-time system performance insights. Brocade Part NumberXBR-SFP10G1370-20Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1370nm Max Cable

Cisco CWDM-SFP10G-1390-20 Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-1390-20 is a specialized 10G SFP+ CWDM optical transceiver module engineered for 20km duplex LC single-mode fiber links, leveraging a precise 1390nm DFB laser and highly sensitive PIN photodiode coupled with integrated digital diagnostic monitoring (DDM) to ensure deterministic signal integrity. Cisco Part NumberCWDM-SFP10G-1390-20Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1390nm Max Cable Distance 20km Connector Duplex LC Media SMF

Juniper EX-SFP-10GE-CWE41 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1410nm, 40km, LC, DOM) The Juniper EX-SFP-10GE-CWE41 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Dell CWDM-SFP10G-1410 Compatible LINK-PP 10G SFP+ Specifications The CWDM-SFP10G-1410 optical module encapsulates a high-stability 1410nm CWDM DFB laser transmitter and an integrated PIN photodiode receiver within an SFF-8431 compliant 10G SFP+ duplex LC footprint. It is engineered to sustain high-speed 10Gbps single-mode fiber spans up to 20km with a low bit-error rate, while providing deep operational insight via SFF-8472 compliant real-time Digital  Diagnostics Monitoring (DDM). Operating across a commercial 0°C to 70°C temperature range, this hot-pluggable module

Juniper EX-SFP-10GE-CWE43 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1430nm, 40km, LC, DOM) The Juniper EX-SFP-10GE-CWE43 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

Ciena CWDM-SFP10G-1450 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1450nm, 40km, LC, DOM) The Ciena CWDM-SFP10G-1450 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Dell CWDM-SFP10G-1450 Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-1450 functions as a commercial-grade 10G SFP+ CWDM optical transceiver module that couples a DFB laser and PIN photodiode to span 20km at 1450nm, complete with real-time Digital Diagnostic Monitoring across a 0°C to 70°C temperature envelope. Dell Part NumberCWDM-SFP10G-1450Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1450nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB Receiver Type PIN TX Power -

Brocade CW-SFP10G80-47-I Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (Industrial, SMF, 1470nm, 80km, LC, DOM) The Brocade CW-SFP10G80-47-I Compatible LINK-PP The SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-