FS CW-SFP10G40-27 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1270nm, 40km, LC, DOM) The FS CW-SFP10G40-27 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

HPE CWDM-SFP10G-1270 Compatible LINK-PP 10G SFP+ Specifications The HPE CWDM-SFP10G-1270 Compatible LINK-PP module is a 10G CWDM SFP+ transceiver designed for single-mode fiber links of up to 20 kilometers. It operates at the precise wavelength of 1270nm. HPE Part NumberCWDM-SFP10G-1270Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1270nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX Power -5 to +2dBm RX Power -16 to -1dBm Receiver Sensitivity <-

Generic CWDM-SFP10G-20SP Compatible LINK-PP 10G SFP+ Specifications CWDM-SFP10G-20SP standardizes 20km single-mode fiber links utilizing a 1290nm CWDM architecture, blending a hot-swappable 10G SFP+ form factor with advanced DFB/PIN optical components and real-time DDM diagnostics. Engineered for high-density networking, this transceiver delivers low-latency 10Gbps data transmission, full LC duplex connectivity, and reliable SFF-8472 compliance for seamless operational monitoring in enterprise and telecom infrastructures. Generic Part NumberCWDM-SFP10G-20SPVendor

HPE CWDM-SFP10G-1290-I Compatible LINK-PP 10G SFP+ Specifications The CWDM-SFP10G-1290-I optical transceiver leverages a precise 1290nm EML laser and PIN photodiode architecture to deliver 10G SFP+ CWDM connectivity across single-mode fiber infrastructure. This module seamlessly facilitates reliable data transmission over distances up to 40km through a duplex LC interface. Additionally, it incorporates comprehensive real-time digital optical monitoring (DOM) to ensure continuous link visibility and proactive network management. HPE Part NumberCWDM-SFP10G-1290-IVendor

Cisco CWDM-SFP10G-1310 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1310nm, 40km, LC, DOM) The Cisco CWDM-SFP10G-1310 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

HPE CWDM-SFP10G-1310 Compatible LINK-PP 10G SFP+ Specifications The HPE CWDM-SFP10G-1310 Compatible LINK-PP module is a 10G SFP+ optical transceiver over single-mode fiber that supports 10.7 Gbps, 1310 nm CWDM, and a 20 km reach, and DOM visibility.  It is a plug-and-play solution for compatible LINK-PP devices. HPE Part NumberCWDM-SFP10G-1310Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7 Gbps Wavelength 1310nm Max Cable Distance 20km Connector Duplex LC Media SMF Transmitter Type DFB CWDM Receiver Type PIN TX Power -5

H3C CWDM-SFP10G-1330-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1330nm, 40km, LC, DOM) The H3C CWDM-SFP10G-1330-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Generic CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ Specifications This Generic CW-SFP10G40-33-I Compatible LINK-PP 10G SFP+ module supports data rates of up to 10 Gbps, operates at the 1330 nm CWDM wavelength, and delivers a maximum transmission distance of up to 40 km over SMF, allowing quick deployment of high-speed connectivity in LINK-PP-compatible networking equipment. Generic Part NumberCW-SFP10G40-33-IVendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1330nm Max Cable Distance 40km Connector Duplex LC Media SMF

Alcatel-Lucent CW-SFP10G40-35 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1350nm, 40km, LC, DOM) The Alcatel-Lucent CW-SFP10G40-35 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement

HPE CWDM-SFP10G-1350 Compatible LINK-PP 10G SFP+ Specifications Designed for advanced single-mode fiber networks, the CWDM-SFP10G-1350 operates as a 10G SFP+ CWDM duplex LC transceiver that pairs a precision 1350nm DFB laser with a PIN photodiode to span 20km distances under a single +3.3V power supply, all while featuring real-time Digital Optical Monitoring (DOM)  for precise optical parameter tracking. HPE Part NumberCWDM-SFP10G-1350Vendor NameLINK-PP Form Factor SFP+ Max Data Rate 10.7Gbps Wavelength 1350nm Max Cable Distance 20km Connector

Dell 430-4585-CW37-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1370nm, 40km, DOM) The Dell 430-4585-CW37-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8

H3C CWDM-SFP10G-1390-40 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1390nm, 40km, LC, DOM) The H3C CWDM-SFP10G-1390-40 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Juniper EX-SFP-10GE-CWE41-20 Compatible LINK-PP 10G SFP+ Specifications The EX-SFP-10GE-CWE41-20 optical module encapsulates a high-stability 1410nm CWDM DFB laser transmitter and an integrated PIN photodiode receiver within an SFF-8431 compliant 10G SFP+ duplex LC footprint. It is engineered to sustain high-speed 10Gbps single-mode fiber spans up to 20km with a low bit-error rate, while providing deep operational insight via SFF-8472 compliant real-time Digital  Diagnostics Monitoring (DDM). Operating across a commercial 0°C to 70°C temperature range, this hot-pluggable

Juniper EX-SFP-10GE-CWE43-20 Compatible LINK-PP 10G SFP+ Specifications EX-SFP-10GE-CWE43-20, a specialized 10G SFP+ CWDM optical module, harnesses a 1430nm wavelength to deliver robust 10Gbps data streams across 20km of single-mode fiber via duplex LC connectivity. Ideal for modern high-density interconnect fabrics, it provides scalable and low-latency optical links across enterprise networks, data centers, and telecom infrastructures. The module is further backed by integrated DOM diagnostics, enabling real-time performance tracking to ensure peak operating reliability.

Dell CWDM-SFP10G-1470 Compatible LINK-PP 10G SFP+ CWDM Optical Transceiver Module (SMF, 1470nm, 80km, LC, DOM) The Dell CWDM-SFP10G-1470 Compatible LINK-PP SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and

Dell 430-4585-CW47-I Compatible LINK-PP SFP+ 10G CWDM Optical Transceiver Module (Industrial, SMF, 1470nm, 40km, DOM) The Dell 430-4585-CW47-I Compatible LINK-PP 10G SFP+ CWDM are high performance, cost effective modules supporting data rate of 10Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472