Cisco QSFP-100/112G-LR4 Compatible LINK-PP LQ-LW112-LR4C 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)The 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode fibers with duplex LC connectors.

Cisco QSFP-100G-DR-S Compatible LINK-PP LQ-SM31100-DR1C 100GBASE-DR QSFP28 Duplex LC/UPC SMF Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)The LQ-SM31100-DR1C 100GBASE-DR Single Lambda QSFP optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a

Cisco QSFP-100G-4W40-I Compatible LINK-PP LQ-LW100-ER4I 100G QSFP28 ER4 Duplex LC/UPC SMF Optical Transceiver Module (SMF, 1310nm, 40km, DOM, Industrial)LINK-PP LQ-LW100-ER4I  QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4I  Cisco Compatible QSFP-100G-4W4

Cisco QSFP-100G-ZR4-S Compatible LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C Cisco Compatible QSFP-100

Cisco QSFP-100G-LR4-I Compatible LINK-PP LQ-LW100-LR4I 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM, Industrial)The LQ-LW100-LR4I QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number LQ-LW100-LR4I Cisco Compatible QSFP-100G-LR4-I Form Factor

Cisco QSFP-100G-SR4-S Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The Cisco QSFP-100G-SR4-S is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C Cisco Part Number QSFP-100G-SR4-S Form Factor QSFP28

Cisco QSFP-100G-ER4L-S Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28 Duplex LC Optical Transceiver Module(SMF, 1310nm, 40km, DOM)Cisco QSFP-100G-ER4L-S Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C Cisco Part Number QSFP-100G-ER4L-S

Cisco QSFP-100G-CWDM4-S Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number: LQ-CW100-FR4C Cisco Part Number QSFP-100G-CWDM4-S

Cisco QSFP-100G-LR4-S Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C Cisco Part Number QSFP-100G-LR4-S Form Factor QSFP28 Max Data Rate

Juniper QSFP-100G-CWDM4-IT Compatible LINK-PP LQ-CW100-FR4I 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM, Industrial)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4I Juniper Compatible QSFP-100G-CWDM4-IT

LINK-PP LQ-LW100-L24I 100G QSFP28 LR4 Duplex LC/UPC SMF Optical Transceiver Module(SMF, 1310nm, 20km, DOM, Industrial)Features：Compliant with the QSFP28 MSA Technical Specifications.Supports operation for a data rate of 103.1Gb/s.Maximum link length of 20km on Single Mode Fiber (SMF).Optical specifications are compliant with IEEE802.3ba 100GBASE-LR4.Low speed electrical signal is compliant with SFF-8679.High speed electrical signal is compliant with 802.3bm CAUI-4.Digital diagnostic functions are available via the I2C interface, as specified by SFF-8636.4x25Gb/s DFB-based LAN-WDM

LINK-PP LQ-LW100-L24C 100G QSFP28 LR4 Duplex LC/UPC SMF Optical Transceiver Module(SMF, 1310nm, 20km, DOM)Features：Compliant with the QSFP28 MSA Technical Specifications.Supports operation for a data rate of 103.1Gb/s.Maximum link length of 20km on Single Mode Fiber (SMF).Optical specifications are compliant with IEEE802.3ba 100GBASE-LR4.Low speed electrical signal is compliant with SFF-8679.High speed electrical signal is compliant with 802.3bm CAUI-4.Digital diagnostic functions are available via the I2C interface, as specified by SFF-8636.4x25Gb/s DFB-based LAN-WDM transmitter with

LINK-PP LQ-BLB100-ZR4C 100G QSFP28 BiDi 80km Optical Transceiver Module for Ethernet and Data Center (SMF, 1270nm-TX/1310nm-RX, LC, DOM)Product Features:Support line rates from 103.125 Gb/sLane bit rate 25.78 Gb/s 100GEUp to 80km transmission with KR4-FECLAN WDM EML laser and PIN receiver with SOASupport Multi-Pin function with IntL/RxLOSL and LPMode/TxDISHigh speed I/O electrical interface (CAUI-4)I2C interface with integrated Digital Diagnostic monitoringQSFP28 MSA package with simplex LC connectorOperating case temperature: 0℃ to 70℃Single +3.3V power supplyPower dissipationCommercial：&

LINK-PP LQ-BLA100-ZR4C 100G QSFP28 BiDi 80km Optical Transceiver Module for Ethernet and Data Center (SMF, 1310nm-TX/1270nm-RX , LC, DOM)Product Features:Support line rates from 103.125 Gb/sLane bit rate 25.78 Gb/s 100GEUp to 80km transmission with KR4-FECLAN WDM EML laser and PIN receiver with SOASupport Multi-Pin function with IntL/RxLOSL and LPMode/TxDISHigh speed I/O electrical interface (CAUI-4)I2C interface with integrated Digital Diagnostic monitoringQSFP28 MSA package with simplex LC connectorOperating case temperature: 0℃ to 70℃Single +3.3V power supplyPower

LINK-PP LQ-BLB100-LRC 100G QSFP28 BiDi 20km Optical Transceiver Module for Ethernet and Data Center (SMF, 1331nm-TX/1271nm-RX, LC, DOM)Product Features:Lane signaling rate 106.25Gb/s with PAM4Up to 10km transmission on SMFEML Laser and PIN receiver4x25.78Gb/s with NRZ electrical interface (CAUI-4)Support KP4 FEC inside the moduleHigh speed I/O electrical interfaceI2C interface with integrated Digital Diagnostic monitoringQSFP28 MSA package with simplex LC connectorSingle +3.3V power supplyPower consumption <3.5 WCompliant to SFF-8636&SFF-8679 standardCompliant to 100G Lambda MSA 100

LINK-PP LQ-BLA100-LRC 100G QSFP28 BiDi 20km Optical Transceiver Module for Ethernet and Data Center (SMF, 1271nm-TX/1331nm-RX, LC, DOM)Product Features:Lane signaling rate 106.25Gb/s with PAM4Up to 10km transmission on SMFEML Laser and PIN receiver4x25.78Gb/s with NRZ electrical interface (CAUI-4)Support KP4 FEC inside the moduleHigh speed I/O electrical interfaceI2C interface with integrated Digital Diagnostic monitoringQSFP28 MSA package with simplex LC connectorSingle +3.3V power supplyPower consumption <3.5 WCompliant to SFF-8636&SFF-8679 standardCompliant to 100G Lambda MSA 100