Brocade 25G-SFP28-SR-I Compatible LINK-PP LS-MM8525-S1I SFP28 25GBASE-SR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 100m,DOM,Industrial)The LS-MM8525-S1I SFP28 transceiver provides 25GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, data center, and 5G Wireless Network, suitable for both outdoor and indoor deployments. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard. LINK-PP

Brocade 25G-SFP28-BXD Compatible LINK-PP LS-BL332725-10C SFP28 25GBASE-D Simplex LC/UPC SMF Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 10km, DOM)The LS-BL332725-10C SFP28 BIDI optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, one of serial data streams are recovered, retimed, and passed to laser driver. In the receive side, the optical data streams is recovered by a PIN and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption. The product is designed with form factor,

Brocade 25G-SFP28-SR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Brocade 25G-SFP28-SR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G

Chelsio SM25G-SR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Chelsio SM25G-SR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is

DELL 407-BBWK Compatible LINK-PP LS-MM8525-S3C SFP28 25GBASE-ESR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 300m, LC, DOM)The LS-MM8525-S3C SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78125Gbps and Maximum link length of 70m on OM3 MMF or 100m on OM4 MMF. The transceiver consists of three sections: a 850nm Oxide VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

DELL 407-BBWK-I Compatible LINK-PP LS-MM8525-S1I SFP28 25GBASE-SR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 100m,DOM,Industrial)The LS-MM8525-S1I SFP28 transceiver provides 25GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, data center, and 5G Wireless Network, suitable for both outdoor and indoor deployments. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard. LINK-PP Part

Dell 407-BBWK Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Dell 407-BBWK SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is ideal

Intel E25GSFP28SRX Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Intel E25GSFP28SRX SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver

Intel E25GSFP28SRX Compatible LINK-PP LS-MM8525-S3C SFP28 25GBASE-ESR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 300m, LC, DOM)The LS-MM8525-S3C SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78125Gbps and Maximum link length of 70m on OM3 MMF or 100m on OM4 MMF. The transceiver consists of three sections: a 850nm Oxide VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

Edge-Core ET7302-SR Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The Edge-Core ET7302-SR SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G

FS SFP28-25GSR-85 Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The FS SFP28-25GSR-85 SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is

H3C SFP-25G-SR-MM850-I Compatible LINK-PP LS-MM8525-S1I SFP28 25GBASE-SR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 100m,DOM,Industrial)The LS-MM8525-S1I SFP28 transceiver provides 25GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, data center, and 5G Wireless Network, suitable for both outdoor and indoor deployments. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard. LINK-PP

H3C SFP-25G-SR-MM850 Compatible LINK-PP LS-MM8525-S1C 25Gb/s SFP28 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The H3C SFP-25G-SR-MM850  SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G

HW SFP28-25G-LR Compatible LINK-PP LS-SM3125-10C SFP28 25GBASE-LR Duplex Optical Transceiver Module (SMF, 1310nm, 10km, LC, DOM)The LS-SM3125-10C SFP28 transceiver provides 25GBase-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, telecom, and data center. Besides, it offers interoperability, laying a foundation for the next-generation network upgrade. Each SFP28 transceiver module is individually tested in targeted switch, it is

HW SFP-25G-ESR Compatible LINK-PP LS-MM8525-S3C SFP28 25GBASE-ESR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 300m, LC, DOM)The LS-MM8525-S3C SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78125Gbps and Maximum link length of 70m on OM3 MMF or 100m on OM4 MMF. The transceiver consists of three sections: a 850nm Oxide VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP

HW 02311KNR-I Compatible LINK-PP LS-MM8525-S1I SFP28 25GBASE-SR Duplex LC/UPC Optical Transceiver Module(MMF, 850nm, 100m,DOM,Industrial)The LS-MM8525-S1I SFP28 transceiver provides 25GBase-SR throughput up to 100m over multimode fiber (MMF) using a wavelength of 850nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, data center, and 5G Wireless Network, suitable for both outdoor and indoor deployments. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard. LINK-PP Part