Cisco QSFP-100G-4WDM-S Compatible LINK-PP LQ-CW100-LR4C 100GBASE-4W10 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1271nm, 1291nm, 1311nm and 1331nm, 10km, DOM)Features:Compliant with the QSFP28 MSA Technical Specifications.Supports operation for a data rate of 103.1Gb/s.Maximum link length of 10km on Single Mode Fiber (SMF).Optical specifications are compliant with IEEE802.3ba 100GBASE-LR4.Low speed electrical signal is compliant with SFF-8679.High speed electrical signal is compliant with 802.3bm CAUI-4.Digital diagnostic functions are available via the I2C interface, as

Cisco C40 DWDM-SFP10G-45.32-I Compatible LINK-PP LS-DW4010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1545.32nm, 40km, LC, Industrial, DOM)The Cisco C40 DWDM-SFP10G-45.32-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C39 DWDM-SFP10G-46.12-I Compatible LINK-PP LS-DW3910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.12nm, 40km, LC, Industrial, DOM)The Cisco C39 DWDM-SFP10G-46.12-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C38 DWDM-SFP10G-46.92-I Compatible LINK-PP LS-DW3810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.92nm, 40km, LC, Industrial, DOM)The Cisco C38 DWDM-SFP10G-46.92-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C37 DWDM-SFP10G-47.72-I Compatible LINK-PP LS-DW3710-40I 10G DWDM SFP+ Transceiver Module (SMF, 1547.72nm, 40km, LC, Industrial, DOM)The Cisco C37 DWDM-SFP10G-47.72-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C36 DWDM-SFP10G-48.51-I Compatible LINK-PP LS-DW3610-40I 10G DWDM SFP+ Transceiver Module (SMF, 1548.51nm, 40km, LC, Industrial, DOM)The Cisco C36 DWDM-SFP10G-48.51-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C35 DWDM-SFP10G-49.32-I Compatible LINK-PP LS-DW3510-40I 10G DWDM SFP+ Transceiver Module (SMF, 1549.32nm, 40km, LC, Industrial, DOM)The Cisco C35 DWDM-SFP10G-49.32-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C34 DWDM-SFP10G-50.12-I Compatible LINK-PP LS-DW3410-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.12nm, 40km, LC, Industrial, DOM)The Cisco C34 DWDM-SFP10G-50.12-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C33 DWDM-SFP10G-50.92-I Compatible LINK-PP LS-DW3310-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.92nm, 40km, LC, Industrial, DOM)The Cisco C33 DWDM-SFP10G-50.92-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C32 DWDM-SFP10G-51.72-I Compatible LINK-PP LS-DW3210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1551.72nm, 40km, LC, Industrial, DOM)The Cisco C32 DWDM-SFP10G-51.72-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C31 DWDM-SFP10G-52.52-I Compatible LINK-PP LS-DW3110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1552.52nm, 40km, LC, Industrial, DOM)The Cisco C31 DWDM-SFP10G-52.52-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C30 DWDM-SFP10G-53.33-I Compatible LINK-PP LS-DW3010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1553.33nm, 40km, LC, Industrial, DOM)The Cisco C30 DWDM-SFP10G-53.33-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C29 DWDM-SFP10G-54.13-I Compatible LINK-PP LS-DW2910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1554.13nm, 40km, LC, Industrial, DOM)The Cisco C29 DWDM-SFP10G-54.13-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C22 DWDM-SFP10G-59.79-I Compatible LINK-PP LS-DW2210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1559.79nm, 40km, LC, DOM, Industrial)The Cisco DWDM-SFP10G-59.79-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C21 DWDM-SFP10G-60.61-I Compatible LINK-PP LS-DW2110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1560.61nm, 40km, LC, DOM, Industrial)The Cisco DWDM-SFP10G-60.61-I  SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to

Cisco C20 DWDM-SFP10G-61.41-I Compatible LINK-PP LS-DW2010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1561.41nm, 40km, LC, DOM, Industrial)The Cisco DWDM-SFP10G-61.41-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be