Cisco SFP-25G-LR-I Compatible LINK-PP LS-SM3125-10I 25Gbps SFP28 Optical Transceiver Module(Industrial, SMF, 1310nm, 10km, LC, DOM)Product Feature:Up to 25.78 Gb/s bi-directional data linksHot-pluggable SFP28 footprintUp to 10 km on 9/125µm SMFBuilt-in digital diagnostic functions1310nm DFB laser transmitterDuplex LC connectorMetal enclosure, for lower EMIRoHS compliant1.2W maximum power consumption with established linkSupports optical and electrical loopback functionsSingle 3.3V power supply LINK-PP Part Number LS-SM3125-10I

Cisco DS-SFP-FC-2G-LW Compatible LINK-PP LS-SM312G-10C SFP 2.5G Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, LC, DOM)The LS-SM312G-10C SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics

Cisco C40 DWDM-SFP10G-45.32-I Compatible LINK-PP LS-DW4010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1545.32nm, 40km, LC, Industrial, DOM)The Cisco C40 DWDM-SFP10G-45.32-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C39 DWDM-SFP10G-46.12-I Compatible LINK-PP LS-DW3910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.12nm, 40km, LC, Industrial, DOM)The Cisco C39 DWDM-SFP10G-46.12-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C38 DWDM-SFP10G-46.92-I Compatible LINK-PP LS-DW3810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1546.92nm, 40km, LC, Industrial, DOM)The Cisco C38 DWDM-SFP10G-46.92-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C37 DWDM-SFP10G-47.72-I Compatible LINK-PP LS-DW3710-40I 10G DWDM SFP+ Transceiver Module (SMF, 1547.72nm, 40km, LC, Industrial, DOM)The Cisco C37 DWDM-SFP10G-47.72-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C36 DWDM-SFP10G-48.51-I Compatible LINK-PP LS-DW3610-40I 10G DWDM SFP+ Transceiver Module (SMF, 1548.51nm, 40km, LC, Industrial, DOM)The Cisco C36 DWDM-SFP10G-48.51-I 10G SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C35 DWDM-SFP10G-49.32-I Compatible LINK-PP LS-DW3510-40I 10G DWDM SFP+ Transceiver Module (SMF, 1549.32nm, 40km, LC, Industrial, DOM)The Cisco C35 DWDM-SFP10G-49.32-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C34 DWDM-SFP10G-50.12-I Compatible LINK-PP LS-DW3410-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.12nm, 40km, LC, Industrial, DOM)The Cisco C34 DWDM-SFP10G-50.12-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C33 DWDM-SFP10G-50.92-I Compatible LINK-PP LS-DW3310-40I 10G DWDM SFP+ Transceiver Module (SMF, 1550.92nm, 40km, LC, Industrial, DOM)The Cisco C33 DWDM-SFP10G-50.92-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C32 DWDM-SFP10G-51.72-I Compatible LINK-PP LS-DW3210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1551.72nm, 40km, LC, Industrial, DOM)The Cisco C32 DWDM-SFP10G-51.72-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C31 DWDM-SFP10G-52.52-I Compatible LINK-PP LS-DW3110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1552.52nm, 40km, LC, Industrial, DOM)The Cisco C31 DWDM-SFP10G-52.52-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C30 DWDM-SFP10G-53.33-I Compatible LINK-PP LS-DW3010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1553.33nm, 40km, LC, Industrial, DOM)The Cisco C30 DWDM-SFP10G-53.33-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C29 DWDM-SFP10G-54.13-I Compatible LINK-PP LS-DW2910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1554.13nm, 40km, LC, Industrial, DOM)The Cisco C29 DWDM-SFP10G-54.13-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C22 DWDM-SFP10G-59.79-I Compatible LINK-PP LS-DW2210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1559.79nm, 40km, LC, DOM, Industrial)The Cisco DWDM-SFP10G-59.79-I SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be

Cisco C21 DWDM-SFP10G-60.61-I Compatible LINK-PP LS-DW2110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1560.61nm, 40km, LC, DOM, Industrial)The Cisco DWDM-SFP10G-60.61-I  SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to