The DWDM-SFP10G-60.61-I SFP+ module integrates a cooled C-band EML laser operating at 1560.60nm (Channel 21, 100GHz ITU grid) and an APD photodetector for 10GBASE-DWDM applications, enabling point-to-point SMF transmission distances up to 80km. Built-in digital diagnostic monitoring capabilities provide continuous, real-time tracking of transceiver operating states for proactive link maintenance and signal integrity assurance.
Dell Part Number
DWDM-SFP10G-60.61-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1560.60nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of Dell DWDM-SFP10G-60.61-I Compatible LINK-PP 10G SFP+
Dell DWDM-SFP10G-60.61-I Compatible LINK-PP module is an industrial-grade 10G DWDM SFP+ transceiver engineered for reliable point-to-point links over single-mode fiber up to 80km. It combines a precise 1560.60nm channel wavelength, an industry-standard duplex LC interface, and integrated digital diagnostics to maximize fiber utilization in harsh operating environments.
Built with a hot-pluggable SFP+ footprint, this 10G DWDM module allows fast installation and replacement without powering down host equipment. Full compliance with the SFP+ Multi-Source Agreement (MSA) ensures seamless physical and electrical fit across standard networking hardware.
DWDM-SFP10G-60.61-I: 10 Gbps Connectivity for Long-Haul Industrial Backhaul
Operating at 10Gbps, this SFP+ transceiver provides stable, full-speed data transport for long-distance industrial backhaul connections. This capability allows critical utility and telecom sites to move large volumes of telemetry and control data over extended spans.
DWDM-SFP10G-60.61-I Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing (DWDM) technology transmits multiple distinct data channels across a single optical strand along the 100GHz ITU grid. This multiplexing method multiplies network capacity dramatically while avoiding the high costs of laying new fiber runs.
DWDM-SFP10G-60.61-I Module with 1560.60nm Wavelength
Operating at a fixed 1560.60nm optical wavelength (ITU Channel 21), the cooled laser provides exceptional spectral stability for multi-channel DWDM systems. This pinpoint optical frequency prevents channel crosstalk and preserves clean signal paths across dense multiplexed links.
An optical link reach of up to 80km over single-mode fiber enables extended connectivity between distant edge sites without intermediate repeaters. Built-in cooled EML transmitter and sensitive APD receiver maintain sufficient power budget over this entire span.
DWDM-SFP10G-60.61-I Module with Duplex LC Interface
The industry-standard duplex LC optical connector provides secure, low-loss fiber termination for single-mode patch cords. Its compact, widely adopted latch design simplifies patch panel management and ensures dependable optical mating.
DWDM-SFP10G-60.61-I Module with DDM for Real-Time Monitoring
Integrated Digital Diagnostic Monitoring (DDM) delivers live visibility into vital operating parameters, including optical power, transceiver temperature, laser bias current, and supply voltage. Compatibility with SFF-8472 digital diagnostic functions allows system administrators to isolate link issues promptly and streamline routine maintenance.
Dell DWDM-SFP10G-60.61-I Compatible LINK-PP DWDM SFP+ transceivers meet rigorous global safety, environmental, and manufacturing standards with full ISO 9001, CE, RoHS, and FCC certifications.
Every 10G DWDM module undergoes rigorous optical and electrical performance tests to verify lasting durability in industrial applications.
DWDM-SFP10G-60.61-I Quality Certifications
These recognized international approvals verify that each transceiver module satisfies mandatory electromagnetic compliance, environmental safety, and build quality rules.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-60.61-I Certified for Reliable Host-Device Compatibility
Extensive switch and router interoperability validation ensures seamless plug-and-play integration with major enterprise networking platforms.
Every DWDM SFP+ transceiver passes comprehensive testing protocols to guarantee dependable signal integrity and hardware stability before deployment. For deeper insights into our verification processes and standards, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength precision to ensure channel stability and accuracy.
Eye Pattern Test
Analyze transmitter waveform quality and eye mask margins for clarity.
Bit Error Rate Test
Evaluate data transmission accuracy to eliminate packet loss over distance.
Temperature Test
Confirm stable transceiver operation across the full industrial operating range.
Product Shipping for Dell DWDM-SFP10G-60.61-I Compatible LINK-PP 10G SFP+
Every DWDM-SFP10G-60.61-I 10G DWDM SFP+ transceiver is packaged under strict handling standards to prevent physical and electrical damage during transit. Reliable global shipping partners ensure orders arrive safely and on schedule at your destination.
Anti-Static Protective Packaging
Shield delicate optical components against electrostatic discharge during transit handling.
Shock-Resistant Transport Protection
Safeguard optical transceivers against accidental impacts and transit handling vibrations.
Fast Order Processing and Dispatch
Prepare and dispatch orders rapidly to minimize total project lead time.
Global Logistics and International Delivery
Deliver transceiver modules worldwide via trusted carriers with end-to-end tracking.
To deploy the DWDM-SFP10G-60.61-I, insert the transceiver into any SFP+ port and connect duplex LC fiber to the DWDM multiplexer. Its hot-pluggable design provides stable 10Gbps transport across 80km spans, serving as a dependable link for long-haul industrial backhaul across smart grids and transport networks.
DWDM-SFP10G-60.61-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DWDM-SFP10G-60.61-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Yes, the module features an all-metal bail latch mechanism designed to endure repetitive insertion and removal cycles while ensuring a tight mechanical lock inside high-density switch cages. by LINK-PP Technical Support
Use standard single-mode fiber patch cables terminated with duplex LC connectors. Multimode fiber (such as OM3 or OM4) is incompatible with this 1560.60nm DWDM module and may prevent the link from working reliably. by LINK-PP Technical Support
No. Disconnecting the module immediately terminates optical emission on the 1560.60nm channel without creating optical surges or crosstalk across neighboring ports on a 100GHz passive multiplexer. by LINK-PP Technical Support
Yes, every transceiver ships with a fitted dust cap inside the duplex LC receptacle. Keep the cap firmly seated until the moment you connect your clean fiber patch cord to prevent airborne debris from degrading optical coupling. by LINK-PP Technical Support
Rolled out a dozen of these DWDM modules for cellular base station aggregation in an outdoor cabinet. Despite severe ambient temperature swings throughout the day, the 1560.60nm center wavelength stayed rock stable on the 100GHz ITU grid. Built-in DDM diagnostics make remote field troubleshooting fast and predictable.
United States · English · USD
