Generic 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Vendor Name LINK-PP Form Factor QSFP28

H3C JH419A Compatible LINK-PP LQ-SW100-SR4C 100GBASE QSFP28 SWDM4 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The H3C JH419A 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. LINK-PP Part Number LQ-SW100-SR4C H3C Part Number JH419A Form

H3C QSFP-100G-SR4-MM850 Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The H3C QSFP-100G-SR4-MM850 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C H3C Part Number  QSFP-100G-SR4-MM850 Form Factor

H3C QSFP-100G-ER4L-WDM1300 Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28  Duplex LC Optical Transceiver Module (SMF, 1310nm, 40km, DOM)H3C QSFP-100G-ER4L-WDM1300 QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C H3C Compatible QSFP-100G-ER4L-WDM1300

H3C QSFP-100G-LR4L-WDM1300 Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C H3C Part Number  QSFP-100G-LR4L-WDM1300

H3C QSFP-100G-LR4-WDM1300 Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C H3C Part Number QSFP-100G-LR4-WDM1300 Form Factor QSFP28 Max Data

HPE Aruba Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate 100Gbps

HPE Aruba 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Vendor Name LINK-PP Form Factor

HW QSFP-100/112G-LR4 Compatible LINK-PP LQ-LW112-LR4C 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)The 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode fibers with duplex LC connectors.

HW 02311KNU-80 Compatible LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C HW Compatible 02311KNU-80

HW QSFP28-100G-BIDI Compatible LINK-PP LQ-SW100-SR4C 100GBASE QSFP28 SWDM4 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The HW QSFP28-100G-BIDI 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. LINK-PP Part Number LQ-SW100-SR4C HW Part Number QSFP28-100G-BIDI

HW QSFP-100G-ER4-Lite Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28 Duplex LC Optical Transceiver Module(SMF, 1310nm, 40km, DOM)HW QSFP-100G-ER4-Lite Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C HW Part Number QSFP-100G-ER4-Lite

HW 02311MNN 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C HW Part Number 02311MNN Form Factor

HW 02311KNU Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C HW Part Number 02311KNU Form Factor QSFP28 Max Data Rate 100Gbps

IBM Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate 100Gbps

Juniper 100/112GBASE-LR4 Compatible LINK-PP LQ-LW112-LR4C 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)The 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode fibers with duplex LC connectors.