LINK-PP LP11GC01030M QSFP-DD 1x1 Cage With EMI Spring Finger Heat Sink LINK-PP  Part Number LP11GC01030M Part Status Active Connector Style Cage with Heat Sink Connector Type QSFP-DD Number of Positions-Mounting TypeThrough Hole, Right AngleTerminationPress-FitFeaturesEMI Shielded Port Matrix Configuration1x1 PortsNumber of Ports1 Operating Temperature Range-40 – 85°CPluggable I/O Applications- Circuit

LINK-PP LP11FC01030 QSFP28 1x1 Cage With EMI Spring Finger Heat Sink LINK-PP  Part Number LP11FC01030 Part Status Active Connector Style Cage with Heat Sink Connector Type QSFP28 Number of Positions-Mounting TypeThrough Hole, Right AngleTerminationPress-FitFeaturesEMI Shielded Port Matrix Configuration1x1 PortsNumber of Ports1Number of Rear EONs per Port Column1Data Rate (Max)(Gb/s)28 Operating Temperature Range-40 –

LINK-PP LQ-LW112-LR4C 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)The 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode fibers with duplex LC connectors.

LINK-PP LQ-M31100-LR4C 100GBASE-PLR4 QSFP28 Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO, DOM)The LQ-M31100-LR4C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 Transceiver for 100G Receiver Applications. The QSFP28 full-duplex optical module offers4 independent receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 10km using single mode fiber. An optical fiber ribbon cable with an MPO/MTP TM connector can be plugged into the QSFP28 module receptacle. QSFP28 PSM4 is one kind of parallel Receiver which provides increased

LINK-PP LQ-M31100-FR4C 100GBASE-PLR4L QSFP28 Optical Transceiver Module (SMF, 1310nm, 2km, MTP/MPO, DOM)The LQ-M31100-FR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 Transceiver for 100G Receiver Applications. The QSFP28 full-duplex optical module offers4 independent receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 2km using single mode fiber. An optical fiber ribbon cable with an MPO/MTP TM connector can be plugged into the QSFP28 module receptacle. QSFP28 PSM4 is one kind of parallel Receiver which provides increased port

LINK-PP LQ-BL859140-SRC 40G QSFP+ BiDi Hot Pluggable Optical Transceiver Module(MMF, 850/910nm, 100m, Duplex LC )The LQ-BL859140-SRC is a Four-Channel Pluggable, LC Duplex, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications.This transceiver is a high performance module for short-range duplex data communication and interconnect applications. It integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 10.3125 Gbps and conforms to the 40GE XLPPI interface.

LINK-PP LQ-M8540-SR4I QSFP+ 40GBASE-SR4 MPO-12/UPC Optical Transceiver Module(MMF, 850nm, 150m, DOM, Industrial)The LQ-M8540-SR4I QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA, IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard. At the same time, it is completely interoperable with all standard 40GBASE-SR4 interfaces. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters.

LINK-PP LQ-M8540-SR4C QSFP+ 40GBASE-SR4 MPO-12/UPC Optical Transceiver Module(MMF, 850nm, 150m, DOM)The LQ-M8540-SR4C QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA, IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard. At the same time, it is completely interoperable with all standard 40GBASE-SR4 interfaces. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters. With its

LINK-PP LQ-SM31100-DR1C 100GBASE-DR QSFP28 Duplex LC/UPC SMF Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)The LQ-SM31100-DR1C 100GBASE-DR Single Lambda QSFP optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a 1x100G PAM-4 optical signal. Digital

LINK-PP LQ-M3140-LR4C QSFP+ 4 x 10GBASE-LR Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO-12, DOM)The transceiver is designed for 10km optical communication applications,which compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 channels signals, and converts them to 4 channel output electrical data.

LINK-PP LQ-LW100-ER4I 100G QSFP28 ER4 Duplex LC/UPC SMF Optical Transceiver Module (SMF, 1310nm, 40km, DOM, Industrial)LINK-PP LQ-LW100-ER4I  QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4I  Vendor Name LINK-PP Form Factor

LINK-PP LQ-LW100-ZR4I 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM, Industrial)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4I Vendor Name LINK-PP

LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C Vendor Name LINK-PP Form

LINK-PP LQ-LW100-LR4I 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM, Industrial)The LQ-LW100-LR4I QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number LQ-LW100-LR4I Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate

LINK-PP LQ-CW40-LR4C QSFP+ 40GBASE-LR4 Duplex LC/UPC Optical Transceiver Module (SMF, 1310nm, 10km, LC, DOM)The QSFP+ LR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 10km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output

LINK-PP LQ-CW40-LR4I 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km, Industrial）The LQ-CW40-LR4I QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4I Vendor Name LINK-PP Form Factor QSFP+ Max Data