H3C QSFP-40G-ER4-SM1310 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

H3C QSFP-100G-ER4L-WDM1300 Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28  Duplex LC Optical Transceiver Module (SMF, 1310nm, 40km, DOM)H3C QSFP-100G-ER4L-WDM1300 QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C H3C Compatible QSFP-100G-ER4L-WDM1300

H3C QSFP-100G-LR4L-WDM1300 Compatible LINK-PP LQ-CW100-FR4C 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C H3C Part Number  QSFP-100G-LR4L-WDM1300

H3C QSFP-100G-LR4-WDM1300 Compatible LINK-PP 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM)The QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number: LQ-LW100-LR4C H3C Part Number QSFP-100G-LR4-WDM1300 Form Factor QSFP28 Max Data

HPE Aruba Compatible LINK-PP LQ-AOC11100-3M 100G QSFP28 Active Optical Cable (3-meter, QSFP28 to QSFP28)The LQ-AOC11100-3M is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP8 AOC for 100 Gigabit Ethernet，In fini Band EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth. LINK-PP QSFP28 Active Optical Cable’s length is up to 70 meters over OM3 MMF or 100 metersover OM4 MMF. These modules are designed to operate over

HPE Aruba Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate 100Gbps

HPE Aruba 100G CWDM4 QSFP28 Duplex LC SMF Optical Transceiver Module Compatible LINK-PP LQ-CW100-FR4C (SMF, 1310nm, 2km, DOM)100G QSFP28 CWDM4 is designed to operate over single-mode fiber system using 4X25 CWDM channel in 1310 band and links up to 2km. The module converts 4 inputs channel of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. LINK-PP Part Number LQ-CW100-FR4C Vendor Name LINK-PP Form Factor

HPE H3C JL306A Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

HW QSFP-100/112G-LR4 Compatible LINK-PP LQ-LW112-LR4C 100GBASE-LR4 and 112GBASE-OTU4 QSFP28 Dual Rate Optical Transceiver Module(SMF, 1310nm, 10km, LC,DOM)The 100G QSFP28 LR4 is a fully-integrated 4x 28Gbps optical transceiver module which can support links of up to 10km.The transmitter consists of 4 channels of cooled DFBs and driver ICs.The receiver consists of a PIN array and TIA ICs and has CDR circuits (Clock and Data Recovery) on both transmitter and receiver channels. It has 4x 28Gbps optical interfaces for operation over a pair of single mode fibers with duplex LC connectors.

HW 02311KNU-80 Compatible LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C HW Compatible 02311KNU-80

HW QSFP-ELR4-40G Compatible LINK-PP LQ-CW40-L24C 40GBASE-T QSFP+ Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 20km)The LQ-CW40-L24C QSFP+ FR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them

HW QSFP-100G-AOC3M Compatible LINK-PP LQ-AOC11100-3M 100G QSFP28 Active Optical Cable (3-meter, QSFP28 to QSFP28)The HW QSFP-100G-AOC3M is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP8 AOC for 100 Gigabit Ethernet，In fini Band EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth. LINK-PP QSFP28 Active Optical Cable’s length is up to 70 meters over OM3 MMF or 100 metersover OM4 MMF. These modules are designed to

HW QSFP28-100G-BIDI Compatible LINK-PP LQ-SW100-SR4C 100GBASE QSFP28 SWDM4 Optical Transceiver Module (MMF, 850nm, 100m,Duplex LC,DOM)The HW QSFP28-100G-BIDI 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. LINK-PP Part Number LQ-SW100-SR4C HW Part Number QSFP28-100G-BIDI

HW QSFP-100G-SR4 Compatible LINK-PP LQ-M85100-SR4C 100GBASE SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)The HW QSFP-100G-SR4 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane.It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC. LINK-PP Part Number LQ-M85100-SR4C HW Part Number  QSFP-100G-SR4 Form Factor QSFP28

HW QSFP-40G-ER4 Compatible LINK-PP LQ-CW40-ER4C 40GBASE-T ER4 QSFP+ SMF Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 40km, LC, DOM)The QSFP+ transceiver is designed for 40km optical communication applications，which is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4

HW QSFP-100G-ER4-Lite Compatible LINK-PP LQ-LW100-ER4C 100G ER4 QSFP28 Duplex LC Optical Transceiver Module(SMF, 1310nm, 40km, DOM)HW QSFP-100G-ER4-Lite Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4C HW Part Number QSFP-100G-ER4-Lite