Geen verzendkosten: 88,11 €+ (zendontvangers en kooien), 534,00 €+ (overige producten). Neem voor grotere aantallen of een prijsopgave op maat rechtstreeks contact met ons op.
Hulp nodig?
Chat live met ons
Live Chat
Wilt u bellen?

+ 86-752-3386717

Netherlands · Nederlands · EUR
  • Zorg voor uw zaken met een verscheidenheid aan vertrouwde betalingsopties.

  • Gebruik het bestelnummer of trackingnummer om de verzendstatus te controleren.

  • Ontvang snel een offerte en profiteer van een professionelere service.

  • Help uw budget en uitgaven beter te beheren.

  • Ontmoet ons en leer onze missie, overtuiging, service en meer kennen.

  • Vind onze locaties en kom nauw met ons in contact.

  • Kwaliteitsbeheer, testen, compatibiliteit en wereldwijde naleving.

  • Ontdek het laatste nieuws en evenementen in de buurt l-p.com

  • Een diepgaande analyse van technische handleidingen, industriestandaarden en inzichten in SFP-compatibiliteit.

  • Gedetailleerde productbenchmarks en vergelijkingen naast elkaar helpen u bij het kiezen van de juiste module.

  • Ontdek praktische connectiviteitsoplossingen voor datacenters, bedrijven en telecomnetwerken.

  • Essentiële tips voor het kiezen van datasnelheden, transmissieafstanden en connectortypes.

selecteer valuta
USD - US Dollar
EUR - Euro
GBP - Britse pond
CAD - Canadese dollar
AUD - Australische dollar
JPY - Japanse yen
SEK - Zweedse kroon
NOK - Noorse kroon
IDR - Indonesia Rupiahs
BRL - Braziliaanse Real
THB - Thailand Baht
LS-DAC1110-7MN 7m (23ft) 10g sfp+ to sfp+ passive copper twinax cable
Klik om de uitgebreide weergave te openen

LINK-PP LS-DAC1110-7MN 7m (23ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel

Product overzicht

Product
LINK-PP LS-DAC1110-7MN 7m (23ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel
SKU
228004
P / N
LS-DAC1110-7MN
Prijs
28,48 €
Voorraad
128 op voorraad
Verkocht
710
Stuksprijs 28,48 €
Nieuwe gebruikers: 8,90 € Kortingsbon voor je eerste bestelling
Code linkpp2610
Voor bestellingen boven 890,00 € Krijgen 13,35 € af
Code Linkpp15
Voor bestellingen boven 2.670,00 € Krijgen 44,50 € af
Code Linkpp50
Voor bestellingen boven 4.450,00 € Krijgen 89,00 € af
Code Linkpp100
Vervaardiging: LINK-PPP / N: LS-DAC1110-7MNSKU: 228004

LINK-PP origineelData papieralle downloads

Volumeprijzen Online prijsklassen · grotere aantallen of aangepaste prijs op aanvraag
28.48 €
1–99 st
27.06 €
100–999 st
26.20 €
1,000–2,999 st
25.35 €
3,000–5,999 st
24.49 €
(6,000 stuks)

Heeft u een grotere hoeveelheid nodig dan in deze categorieën staat aangegeven, of wilt u over de prijs onderhandelen?

Voorraad:
128 op voorraad
Verzenden:
20,79 €
naar Nederland via FedEx IP
Geschatte Leveringstijd : 3 - 6 dagen.
5 jaar garantie 15-dag retourbeleid 15 dagen omruilen
Garantie
  • Wij bieden een toonaangevende garantie van 5 jaar.
  • Lees de tabel voor gegevens van alle productgaranties.
Retourneren en ruilen
  • U ontvangt uw terugbetaling ongeveer 5 werkdagen na ontvangst van de geretourneerde artikelen.
  • Vervangende artikelen die op voorraad zijn, kunnen binnen 1 werkdag worden verzonden.
  • Lees het volledige retourbeleid voor gegevens.
Gratis verzending boven 88,11 €.
Of verzend via je eigen UPS/FedEx/DHL-account bij het afrekenen (0,00 € verzending).
Aantal:
Totale prijs:
28,48 €

LINK-PP LS-DAC1110-7MN 7m (23ft) 10G SFP+ Direct Attach koperkabel (7 meter, passief, SFP+ naar SFP+, 24AWG)

De LINK-PP De LS-DAC1110-7MN 10G SFP+ Direct Attach-kabel voldoet aan de SFF-8431-, SFF-8432- en SFF-8472-specificaties. Er zijn verschillende draaddiktes beschikbaar, van 30 tot 24 AWG, en diverse kabellengtes (tot 7 meter). De 10G SFP+ koperkabel biedt een kosteneffectieve oplossing voor het tot stand brengen van een 10-Gigabit verbinding over korte afstanden binnen een rack of tussen aangrenzende racks in datacenters.

LINK-PP Onderdeel nummer LS-DAC1110-7MN Naam van de leverancier LINK-PP
Connector Type SFP+ naar SFP+ Max. Gegevenssnelheid 10.3125Gbps
Kabellengte 7m (23ft) Kabel Type Passieve Twinax
Minimale buigradius
30mm Wire AWG
24AWG
Media Koper Laboratoriumvoedingen 3.3V
Materiaal van de jas PVC (OFNR) Bedrijfstemperatuurbereik 0 tot 70 ° C
protocollen 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel Toepassing 10G Ethernet

Modelvergelijkingstabel

LINK-PP

Bijpassende producten

Foto's ID KAART# Beschrijving Prijs Voorraad Winkelmand

Downloaden

Product tekening LS-DAC1110-xxN.pdf

Vragen

Nog geen vragen

Vraag als eerste naar specificaties, compatibiliteit of levertijd.

Een vraag stellen
  • A:
    The usual failure mode is a rising error count on one lane rather than a hard link down, because a partial break in a twinax pair degrades the signal instead of killing it. That means you can catch it early by monitoring CRC and FEC corrected counters on the port. If a port that has been clean for months starts showing corrected errors that climb steadily, suspect the cable or the connector before the switch. A physical inspection for a kink or a crushed section usually confirms it. by LINK-PP Technische ondersteuning
  • A:
    The difference between 1m and 7m of copper is roughly 30 nanoseconds of propagation delay. For storage replication, even synchronous replication, that is negligible compared with the processing and protocol overhead at each end. Where length does matter is in extremely latency sensitive trading or instrumentation systems, and those would not be using 7m passive copper in the first place. For normal enterprise storage traffic, the length difference is not measurable in application terms. by LINK-PP Technische ondersteuning
  • A:
    A single 90 degree corner is fine as long as the bend radius stays above the 30mm minimum, which usually means a radius guide or a gentle sweep rather than a sharp corner. What you should avoid is repeated bending at the same point, because the conductor will work harden and the impedance will shift. Install it once, dress it properly, and do not use it as a cable you unplug and re route frequently. If the tray has a genuine sharp corner, add a corner guide. by LINK-PP Technische ondersteuning
  • A:
    7m is at the practical limit for passive copper at 10G, which is why this part uses 24AWG and why the assembly is noticeably heavier than the short versions. It works, but the margin is thinner than at 1m, so the quality of the switch cages and the care taken during installation matter more. If your run is genuinely 7m and you cannot shorten it, copper is still viable and cheaper than optics. If the run is longer, or if the path is difficult, fibre is the better answer. by LINK-PP Technische ondersteuning

Klantenreviews

  • 4.9

    19 recensies

  • 5 Stars
    95%
    4 Stars
    5%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
  • Alle beoordelingen (19)
Geen gegevens
R *** n
Duitsland
verified Inkoop
5.0
2026-09-11
Used between a pair of switches in a lab where the racks are further apart than usual. Has been up for five months with no flaps.
C *** k
Saudi-Arabië
verified Inkoop
5.0
2026-08-12
Labels every metre along the jacket, which is useful when you are pulling a bundle and want to know how much is left.
S *** t
Ireland
verified Inkoop
5.0
2026-07-12
Not flexible, so route it before you connect.
E *** k
België
verified Inkoop
4.0
2026-06-21
Signal is fine but the stiffness is a real constraint. We had to reroute because it would not make the corner into the manager without a hard bend.
Een
Thailand
verified Inkoop
5.0
2026-04-13
We had a specific problem: a pair of switches that could not be moved and were just too far apart for the 5m part once the tray was included. Fibre would have meant new optics on both sides and a media converter on one. This cable solved it for a fraction of the cost and has been running without intervention since the spring maintenance window.
verified Inkoop
.0
Resultaat commentaar

By 

Nog geen beoordelingen

Deel als eerste je ervaring met dit product.

Schrijf een recensie
|
Verkocht