Geen verzendkosten: 88,11 €+ (zendontvangers en kooien), 534,00 €+ (overige producten). Neem voor grotere aantallen of een prijsopgave op maat rechtstreeks contact met ons op.
Hulp nodig?
Chat live met ons
Live Chat
Wilt u bellen?

+ 86-752-3386717

Netherlands · Nederlands · EUR
  • Zorg voor uw zaken met een verscheidenheid aan vertrouwde betalingsopties.

  • Gebruik het bestelnummer of trackingnummer om de verzendstatus te controleren.

  • Ontvang snel een offerte en profiteer van een professionelere service.

  • Help uw budget en uitgaven beter te beheren.

  • Ontmoet ons en leer onze missie, overtuiging, service en meer kennen.

  • Vind onze locaties en kom nauw met ons in contact.

  • Kwaliteitsbeheer, testen, compatibiliteit en wereldwijde naleving.

  • Ontdek het laatste nieuws en evenementen in de buurt l-p.com

  • Een diepgaande analyse van technische handleidingen, industriestandaarden en inzichten in SFP-compatibiliteit.

  • Gedetailleerde productbenchmarks en vergelijkingen naast elkaar helpen u bij het kiezen van de juiste module.

  • Ontdek praktische connectiviteitsoplossingen voor datacenters, bedrijven en telecomnetwerken.

  • Essentiële tips voor het kiezen van datasnelheden, transmissieafstanden en connectortypes.

selecteer valuta
USD - US Dollar
EUR - Euro
GBP - Britse pond
CAD - Canadese dollar
AUD - Australische dollar
JPY - Japanse yen
SEK - Zweedse kroon
NOK - Noorse kroon
IDR - Indonesia Rupiahs
BRL - Braziliaanse Real
THB - Thailand Baht
LS-DAC1110-1MN 1m (3ft) 10g sfp+ to sfp+ passive copper twinax cable
Klik om de uitgebreide weergave te openen

LINK-PP LS-DAC1110-1MN 1m (3ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel

Product overzicht

Product
LINK-PP LS-DAC1110-1MN 1m (3ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel
SKU
227905
P / N
LS-DAC1110-1MN
Prijs
10,68 €
Voorraad
560 op voorraad
Verkocht
941
Stuksprijs 10,68 €
Nieuwe gebruikers: 8,90 € Kortingsbon voor je eerste bestelling
Code linkpp2610
Voor bestellingen boven 890,00 € Krijgen 13,35 € af
Code Linkpp15
Voor bestellingen boven 2.670,00 € Krijgen 44,50 € af
Code Linkpp50
Voor bestellingen boven 4.450,00 € Krijgen 89,00 € af
Code Linkpp100
Vervaardiging: LINK-PPP / N: LS-DAC1110-1MNSKU: 227905

LINK-PP origineelData papieralle downloads

Volumeprijzen Online prijsklassen · grotere aantallen of aangepaste prijs op aanvraag
10.68 €
1–99 st
10.15 €
100–999 st
9.83 €
1,000–2,999 st
9.51 €
3,000–5,999 st
9.18 €
(6,000 stuks)

Heeft u een grotere hoeveelheid nodig dan in deze categorieën staat aangegeven, of wilt u over de prijs onderhandelen?

Voorraad:
560 op voorraad
Verzenden:
20,79 €
naar Nederland via FedEx IP
Geschatte Leveringstijd : 3 - 6 dagen.
5 jaar garantie 15-dag retourbeleid 15 dagen omruilen
Garantie
  • Wij bieden een toonaangevende garantie van 5 jaar.
  • Lees de tabel voor gegevens van alle productgaranties.
Retourneren en ruilen
  • U ontvangt uw terugbetaling ongeveer 5 werkdagen na ontvangst van de geretourneerde artikelen.
  • Vervangende artikelen die op voorraad zijn, kunnen binnen 1 werkdag worden verzonden.
  • Lees het volledige retourbeleid voor gegevens.
Gratis verzending boven 88,11 €.
Of verzend via je eigen UPS/FedEx/DHL-account bij het afrekenen (0,00 € verzending).
Aantal:
Totale prijs:
10,68 €

LINK-PP LS-DAC1110-1MN 1m (3ft) 10G SFP+ Direct Attach koperkabel (1 meter, passief, SFP+ naar SFP+, 30AWG)

De LINK-PP De LS-DAC1110-1MN 10G SFP+ Direct Attach-kabel voldoet aan de SFF-8431-, SFF-8432- en SFF-8472-specificaties. Er zijn verschillende draaddiktes beschikbaar, van 30 tot 24 AWG, en diverse kabellengtes (tot 7 meter). De 10G SFP+ koperkabel biedt een kosteneffectieve oplossing voor het tot stand brengen van een 10-Gigabit verbinding over korte afstanden binnen een rack of tussen aangrenzende racks in datacenters.

LINK-PP Onderdeel nummer LS-DAC1110-1MN Naam van de leverancier LINK-PP
Connector Type SFP+ naar SFP+ Max. Gegevenssnelheid 10.3125Gbps
Kabellengte 1m (3ft) Kabel Type Passieve Twinax
Minimale buigradius
23mm Wire AWG
30AWG
Media Koper Laboratoriumvoedingen 3.3V
Materiaal van de jas PVC (OFNR) Bedrijfstemperatuurbereik 0 tot 70 ° C
protocollen 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel Toepassing 10G Ethernet

Modelvergelijkingstabel

LINK-PP

Bijpassende producten

Foto's ID KAART# Beschrijving Prijs Voorraad Winkelmand

Downloaden

Product tekening LS-DAC1110-xxN.pdf

Vragen

Nog geen vragen

Vraag als eerste naar specificaties, compatibiliteit of levertijd.

Een vraag stellen
  • A:
    At 1m, FEC is not needed for signal integrity and most 10G ports do not enable it by default. Enabling it adds a small amount of latency and is generally unnecessary at this length. The exception is if your platform requires FEC for a specific port mode or if you are aggregating with links that already use it. In that case consistency across the bundle matters more than the individual cable length, so match the setting to the rest of the group. by LINK-PP Technische ondersteuning
  • A:
    The assembly is rated 0 to 70℃, so 60℃ internal is within the rating but leaves only 10℃ of margin. The connector shell temperature will be higher than ambient because it sits against the switch cage, which is itself a heat source. In an outdoor enclosure I would measure the actual cage temperature rather than the air temperature before committing. If the cage runs above about 65℃, consider an industrial rated assembly or move the switch to a cooler part of the enclosure. by LINK-PP Technische ondersteuning
  • A:
    Cost, power and simplicity. Copper removes two transceivers per link, which cuts the bill of materials substantially, removes the heat those optics generate, and eliminates a class of failure related to module firmware and coding. The trade off is distance: copper is limited to a few metres while fibre can go much further. At 1m inside a cabinet, copper is almost always the better engineering choice unless you have a specific reason to keep the link optical. by LINK-PP Technische ondersteuning
  • A:
    Start with the connector, not the cable. A partially seated SFP+ latch will cause intermittent loss that looks like a cable fault. Reseat both ends and confirm the latch clicks. If that does not fix it, swap the cable to a known good port to separate a port problem from a cable problem. After that, check whether the port has any error counters climbing, and whether the flap correlates with someone working in the cabinet. Physical disturbance is the most common cause of flaps on passive copper that was previously stable. by LINK-PP Technische ondersteuning

Klantenreviews

  • 4.9

    19 recensies

  • 5 Stars
    95%
    4 Stars
    5%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
  • Alle beoordelingen (19)
Geen gegevens
E *** n
Canada
verified Inkoop
5.0
2026-06-06
Ran a 10G iperf test between two hosts on these and got line rate with no retransmits, which is what you want from a passive assembly.
S *** k
Turkije
verified Inkoop
5.0
2026-03-15
I compared the cost against buying SFP+ optics and patch cords for the same forty links. The copper came out at roughly a third of the price, with no transceiver to fail and no fibre cleaning to worry about. The only trade off is distance, and at 1m that is not a trade off at all. Payback was immediate.
T *** s
Filippijnen
verified Inkoop
5.0
2026-01-12
The connector latches are the metal tab type and they release cleanly. On cheaper cables the plastic tab snaps after a few dozen insertions.
N *** n
Australië
verified Inkoop
5.0
2025-12-03
This is the length we use for top of rack to the first server U. One metre leaves a small service loop without coiling excess behind the rail.
R *** s
Singapore
verified Inkoop
5.0
2025-11-11
We ordered forty for a floor refresh. Delivery came in two boxes, both labelled with the part number and length, which made goods in easy.
verified Inkoop
.0
Resultaat commentaar

By 

Nog geen beoordelingen

Deel als eerste je ervaring met dit product.

Schrijf een recensie
|
Verkocht