Geen verzendkosten: 88,11 €+ (zendontvangers en kooien), 534,00 €+ (overige producten). Neem voor grotere aantallen of een prijsopgave op maat rechtstreeks contact met ons op.
Hulp nodig?
Chat live met ons
Live Chat
Wilt u bellen?

+ 86-752-3386717

Netherlands · Nederlands · EUR
  • Zorg voor uw zaken met een verscheidenheid aan vertrouwde betalingsopties.

  • Gebruik het bestelnummer of trackingnummer om de verzendstatus te controleren.

  • Ontvang snel een offerte en profiteer van een professionelere service.

  • Help uw budget en uitgaven beter te beheren.

  • Ontmoet ons en leer onze missie, overtuiging, service en meer kennen.

  • Vind onze locaties en kom nauw met ons in contact.

  • Kwaliteitsbeheer, testen, compatibiliteit en wereldwijde naleving.

  • Ontdek het laatste nieuws en evenementen in de buurt l-p.com

  • Een diepgaande analyse van technische handleidingen, industriestandaarden en inzichten in SFP-compatibiliteit.

  • Gedetailleerde productbenchmarks en vergelijkingen naast elkaar helpen u bij het kiezen van de juiste module.

  • Ontdek praktische connectiviteitsoplossingen voor datacenters, bedrijven en telecomnetwerken.

  • Essentiële tips voor het kiezen van datasnelheden, transmissieafstanden en connectortypes.

selecteer valuta
USD - US Dollar
EUR - Euro
GBP - Britse pond
CAD - Canadese dollar
AUD - Australische dollar
JPY - Japanse yen
SEK - Zweedse kroon
NOK - Noorse kroon
IDR - Indonesia Rupiahs
BRL - Braziliaanse Real
THB - Thailand Baht
LS-DAC1110-5MN 5m (16ft) 10g sfp+ to sfp+ passive copper twinax cable
Klik om de uitgebreide weergave te openen

LINK-PP LS-DAC1110-5MN 5m (16ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel

Product overzicht

Product
LINK-PP LS-DAC1110-5MN 5m (16ft) 10G SFP+ naar SFP+ passieve koperen twinaxkabel
SKU
227955
P / N
LS-DAC1110-5MN
Prijs
17,80 €
Voorraad
290 op voorraad
Verkocht
710
Stuksprijs 17,80 €
Nieuwe gebruikers: 8,90 € Kortingsbon voor je eerste bestelling
Code linkpp2610
Voor bestellingen boven 890,00 € Krijgen 13,35 € af
Code Linkpp15
Voor bestellingen boven 2.670,00 € Krijgen 44,50 € af
Code Linkpp50
Voor bestellingen boven 4.450,00 € Krijgen 89,00 € af
Code Linkpp100
Vervaardiging: LINK-PPP / N: LS-DAC1110-5MNSKU: 227955

LINK-PP origineelData papieralle downloads

Volumeprijzen Online prijsklassen · grotere aantallen of aangepaste prijs op aanvraag
17.80 €
1–99 st
16.91 €
100–999 st
16.38 €
1,000–2,999 st
15.84 €
3,000–5,999 st
15.31 €
(6,000 stuks)

Heeft u een grotere hoeveelheid nodig dan in deze categorieën staat aangegeven, of wilt u over de prijs onderhandelen?

Voorraad:
290 op voorraad
Verzenden:
20,79 €
naar Nederland via FedEx IP
Geschatte Leveringstijd : 3 - 6 dagen.
5 jaar garantie 15-dag retourbeleid 15 dagen omruilen
Garantie
  • Wij bieden een toonaangevende garantie van 5 jaar.
  • Lees de tabel voor gegevens van alle productgaranties.
Retourneren en ruilen
  • U ontvangt uw terugbetaling ongeveer 5 werkdagen na ontvangst van de geretourneerde artikelen.
  • Vervangende artikelen die op voorraad zijn, kunnen binnen 1 werkdag worden verzonden.
  • Lees het volledige retourbeleid voor gegevens.
Gratis verzending boven 88,11 €.
Of verzend via je eigen UPS/FedEx/DHL-account bij het afrekenen (0,00 € verzending).
Aantal:
Totale prijs:
17,80 €

LINK-PP LS-DAC1110-5MN 5m (16ft) 10G SFP+ Direct Attach koperkabel (5 meter, passief, SFP+ naar SFP+, 24AWG)

De LINK-PP De LS-DAC1110-5MN 10G SFP+ Direct Attach-kabel voldoet aan de SFF-8431-, SFF-8432- en SFF-8472-specificaties. Er zijn verschillende draaddiktes beschikbaar, van 30 tot 24 AWG, en diverse kabellengtes (tot 7 meter). De 10G SFP+ koperkabel biedt een kosteneffectieve oplossing voor het tot stand brengen van een 10-Gigabit verbinding over korte afstanden binnen een rack of tussen aangrenzende racks in datacenters.

LINK-PP Onderdeel nummer LS-DAC1110-5MN Naam van de leverancier LINK-PP
Connector Type SFP+ naar SFP+ Max. Gegevenssnelheid 10.3125Gbps
Kabellengte 5m (16ft) Kabel Type Passieve Twinax
Minimale buigradius
30mm Wire AWG
24AWG
Media Koper Laboratoriumvoedingen 3.3V
Materiaal van de jas PVC (OFNR) Bedrijfstemperatuurbereik 0 tot 70 ° C
protocollen 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel Toepassing 10G Ethernet

Modelvergelijkingstabel

LINK-PP

Bijpassende producten

Foto's ID KAART# Beschrijving Prijs Voorraad Winkelmand

Downloaden

Product tekening LS-DAC1110-xxN.pdf

Vragen

Nog geen vragen

Vraag als eerste naar specificaties, compatibiliteit of levertijd.

Een vraag stellen
  • A:
    You lose the electrical isolation that fibre provides, which matters if the two ends are on different power systems or different ground potentials. You also lose the ability to test the link with an optical power meter, so fault finding becomes a swap and check process. On the positive side you remove two transceivers, their heat and their firmware, and you gain a link that a junior engineer can replace without any configuration knowledge. For links inside the same row, that trade is usually worth it. by LINK-PP Technische ondersteuning
  • A:
    Keep it separated. Passive copper carrying high speed data is susceptible to noise coupling from mains cables, and while the differential signalling is reasonably robust, a long parallel run next to power is asking for trouble. Most standards require a minimum separation, often 50mm or more depending on the voltage and the tray construction. Cross mains cables at right angles if you must cross, and never run them in the same bundle for any distance. by LINK-PP Technische ondersteuning
  • A:
    5m gives you about 50cm of margin, which is workable but tight once you allow for a service loop at each end. If your measurement of 4.5m is approximate, the 7m is the safer choice because the extra length can be dressed in a gentle curve without a coil. The penalty for going longer is a slightly heavier cable and marginally more loss, both of which are acceptable. The penalty for going too short is a connector under tension, which is much worse. by LINK-PP Technische ondersteuning
  • A:
    Because loss per metre increases as the conductor gets thinner, and at 5m a 30AWG assembly would attenuate the 10G signal beyond what the receiver can recover reliably. 24AWG has a larger cross section and lower resistance, which keeps the insertion loss inside the 10GBASE-CU budget at that length. The trade off is mechanical: the cable is thicker and much stiffer, so it needs a different approach to routing than the short assemblies. by LINK-PP Technische ondersteuning

Klantenreviews

  • 4.9

    19 recensies

  • 5 Stars
    95%
    4 Stars
    5%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
  • Alle beoordelingen (19)
Geen gegevens
T *** n
Republiek Korea
verified Inkoop
5.0
2026-10-24
We needed 10G between cabinets in the same row and did not want another pair of optics, so we tried the 5m version. It has been stable for four months.
I *** k
Oekraïne
verified Inkoop
5.0
2026-09-02
The jacket is marked with the length every metre, which is handy when you are pulling several of them at once.
C *** t
Griekenland
verified Inkoop
5.0
2026-08-01
Six months, twenty four links, zero replacements. I have nothing interesting to report and that is a good thing.
R *** u
Argentinië
verified Inkoop
5.0
2026-07-25
Cost comparison was straightforward. Two SFP+ optics plus a 5m fibre patch was around four times the price of one of these, and we had a spare optics budget line we could redirect. The links have been up since spring with no intervention, and the switch logs show no CRC errors on any of the twelve.
E *** m
Italië
verified Inkoop
5.0
2026-06-15
Twelve of these across two rows, no errors. :)
verified Inkoop
.0
Resultaat commentaar

By 

Nog geen beoordelingen

Deel als eerste je ervaring met dit product.

Schrijf een recensie
|
Verkocht