Can DDM help us detect whether the module is approaching its temperature limit?

Yes. The module’s real-time DDM function can report operating temperature through compatible host equipment. Your NOC can set thresholds or monitor trends to identify abnormal temperature increases before the module reaches its rated limit.

We use 1G Fibre Channel between storage systems at two locations. Can this 1410nm CWDM SFP be used for that link?

Yes. The LS-CW411G-80C supports 1.063Gbps Fibre Channel and can be used for 1G Fibre Channel links over single-mode fiber. For a stable connection, use a matching 1410nm CWDM module at the other end.

Do we need a CWDM MUX/DEMUX to use this 1410nm SFP module?

A CWDM MUX/DEMUX is needed when multiple CWDM wavelengths share one pair of single-mode fibers. If this is a dedicated point-to-point fiber link using only one optical channel, the 1410nm modules can normally connect directly through duplex single-mode fiber without a MUX/DEMUX.

We already have duplex LC-to-LC single-mode patch cords in our network. Can we connect them directly to this 1410nm CWDM SFP?

Yes. The LS-CW411G-80C has a duplex LC interface and is designed for single-mode fiber. You can connect a standard duplex LC-to-LC single-mode patch cord directly to the module. Just make sure the fiber polarity is correct so the transmit and receive paths are properly matched.

Can this module be inserted while the switch is running, or do we need to power it off first?

This module has a hot-pluggable SFP design, so it can normally be inserted or removed while the switch is powered on. After installation, wait a few seconds for the device to detect the module and check the link status.

Breadcrumb: Home; Producten; Optische zendontvangers | SFP-modules; 1/2/4G Transceivermodules; 1G CWDM/DWDM-SFP; 203158

Klik om de uitgebreide weergave te openen

LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km Duplex LC DOM SMF Optische Transceivermodule

Name: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km Duplex LC DOM SMF Optische Transceivermodule
Brand: LINK-PP
SKU: 203158
Price: 42.14 USD
Availability: InStock
Rating: 4.9 (29 reviews)

#203158

Product: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km Duplex LC DOM SMF Optische Transceivermodule
SKU: 203158
P / N: LS-CW411G-80C
Prijs: € 49
Voorraad: 132 op voorraad
Verkocht: 768
Product-URL: https://www.l-p.com/products/492624.htm

Bij bestellingen boven de $1000 ontvangt u $15.00 korting. , Code: Linkpp15

Bij bestellingen boven de $3000 ontvangt u $50.00 korting. , Code: Linkpp50

Bij bestellingen boven de $5000 ontvangt u $100.00 korting. , Code: Linkpp100

Nieuwe gebruikers: $10 kortingsbon voor bestellingen , Code: linkpp2610

: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km Duplex LC DOM SMF Optische Transceivermodule

29 Reviews Hulp nodig?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

29 beoordelingen

5 vragen

Vraag voorraad aan

768 Verkocht

$ 49

Gratis verzending boven $600. Als u een gunstiger prijs nodig heeft, neem dan rechtstreeks contact met ons op.

Aantal (stuks):

Eenheid prijs :

$ 49

100

$ 46.55

1000

$ 45.08

3000

$ 43.61

6000

$ 42.14

Vervaardiging: LINK-PP

P / N: LS-CW411G-80C

Geschikt voor:: Cisco; LINK-PP; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Golflengte:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Verzenden:

Moet worden onderhandeld

Gratis Verzending

Kan niet leveren

naar via {{now_chooseship?now_chooseship.name:''}}

Geschatte Leveringstijd : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} dagen. Zie details

5 jaar garantie 30-dag retourbeleid 30 dagen omruilen

Voorraad:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Aantal:

(Min. bestelling {{detail_data.prodInfo.minimum_ordered_quantity}} )

onbestelbaar

Totale prijs:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Voeg toe aan wens

Specificaties

Specificaties
Video's
Bijpassende producten
Downloaden
Q & A
Klantenreviews

LINK-PP Specificaties van de LS-CW411G-80C 1G SFP

LS-CW411G-80C is a 1410nm CWDM SFP module engineered for 1G data links, integrating a DFB laser and PIN photodiode to enable 80km reach over single-mode fiber under a 0 – 70°C operating range. Real-time digital optical monitoring is embedded to provide continuous readouts of TX power, RX power, bias current, temperature, and supply voltage, ensuring precise link status visibility.

LINK-PP Onderdeel nummer	LS-CW411G-80C	Naam van de leverancier	LINK-PP
Form Factor	SFP	Max. Gegevenssnelheid	1.25Gbps
Golflengte	1410nm	Max. Kabelafstand	80km
connector	Duplex-LC	Media	SMF
Zender Type	DFB	Type ontvanger	PIN
TX Power	-1 tot + 4dBm	RX-kracht	-26 tot -1dBm
receiver Gevoeligheid	-26dBm	receiver Overload	-1dBm
EMC (Elektromagnetische Communicatie)	ondersteunde	ARREST	ondersteunde
Bedrijfstemperatuurbereik	0 tot 70 ° C	protocollen	SFP MSA, SFF-8472

Video's

Bijpassende producten

Foto's

ID KAART#

Beschrijving

Prijs

Voorraad

Winkelmand

Downloaden

Product tekening

PDF
LS-CWxx1G-80x.pdf

Vragen
Een vraag stellen

Geen gegevens

Q: Can DDM help us detect whether the module is approaching its temperature limit? By X***l on 2026-04-05

A: Yes. The module’s real-time DDM function can report operating temperature through compatible host equipment. Your NOC can set thresholds or monitor trends to identify abnormal temperature increases before the module reaches its rated limit. Door beheerder on 2026-04-06
Q: We use 1G Fibre Channel between storage systems at two locations. Can this 1410nm CWDM SFP be used for that link? Door C***r on 2026-01-09

A: Yes. The LS-CW411G-80C supports 1.063Gbps Fibre Channel and can be used for 1G Fibre Channel links over single-mode fiber. For a stable connection, use a matching 1410nm CWDM module at the other end. Door beheerder on 2026-01-10
Q: Do we need a CWDM MUX/DEMUX to use this 1410nm SFP module? Door W***e on 2025-12-18

A: A CWDM MUX/DEMUX is needed when multiple CWDM wavelengths share one pair of single-mode fibers. If this is a dedicated point-to-point fiber link using only one optical channel, the 1410nm modules can normally connect directly through duplex single-mode fiber without a MUX/DEMUX. Door beheerder on 2025-12-19
Q: We already have duplex LC-to-LC single-mode patch cords in our network. Can we connect them directly to this 1410nm CWDM SFP? Door Z***n on 2025-10-23

A: Yes. The LS-CW411G-80C has a duplex LC interface and is designed for single-mode fiber. You can connect a standard duplex LC-to-LC single-mode patch cord directly to the module. Just make sure the fiber polarity is correct so the transmit and receive paths are properly matched. Door beheerder on 2025-10-24
Q: Can this module be inserted while the switch is running, or do we need to power it off first? Door Y***e on 2025-02-07

A: This module has a hot-pluggable SFP design, so it can normally be inserted or removed while the switch is powered on. After installation, wait a few seconds for the device to detect the module and check the link status. Door beheerder on 2025-02-08

Meer

Klantenreviews
Schrijf een recensie

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

Alle beoordelingen ({{comment.star_num?comment.star_num:comment.count}})

Alle beoordelingen

Slechts 5 sterren

Slechts 4 sterren

Slechts 3 sterren

Slechts 2 sterren

Slechts 1 ster
Recensies met afbeeldingen ( {{comment.pic_comment}} )
Bekijk alle beoordelingen

Geen gegevens

K *** e

Zweden

Geverifieerde aankoop

5.0

2026-06-17

Duplex LC fit was precise and the module came right up.

57 Nuttige stem Heb je vragen? Stel ze hier.

N *** k

België

Geverifieerde aankoop

5.0

2026-06-05

Purchased for a batch rollout of remote network cabinets. The modules have consistent labels and performance, which makes inventory handling easier. Every tested unit passed traffic and diagnostics checks.

59 Nuttige stem Heb je vragen? Stel ze hier.

E *** n

Filippijnen

Geverifieerde aankoop

5.0

2026-05-30

Good packaging, clear labeling, and the correct 1410nm wavelength arrived. We are using it with single-mode OS2 fiber and duplex LC patch leads. It has been a simple upgrade for a legacy 1G fiber path.

82 Nuttige stem Heb je vragen? Stel ze hier.

P *** h

Zweden

Geverifieerde aankoop

5.0

2026-04-08

Exactly what we needed for passive CWDM MUX channel expansion in Stockholm.

63 Nuttige stem Heb je vragen? Stel ze hier.

Het

Mexico

Geverifieerde aankoop

5.0

2026-03-18

Duplex LC snapped tight, link pulled 72km straight without external amplification.

68 Nuttige stem Heb je vragen? Stel ze hier.

D *** s

Polen

Geverifieerde aankoop

5.0

2026-03-10

We deployed this CWDM 80km SFP optical module into our municipal campus fiber loop. The single-mode duplex LC interface seated securely with standard patch cords, and the switch recognized the vendor EEPROM instantly. Super smooth installation! (•‿•)

106 Nuttige stem Heb je vragen? Stel ze hier.

B *** n

Thailand

Geverifieerde aankoop

5.0

2026-03-01

Our operations team installed these in a remote aggregation cabinet connected over roughly 73km of SMF. The optical power levels remained comfortably within range, and there have been no link flaps so far. Nice, dependable commercial-grade optic.

112 Nuttige stem Heb je vragen? Stel ze hier.

K *** n

Denemarken

Geverifieerde aankoop

5.0

2026-02-20

Performance has been stable on our 1G 80km single-mode fiber connection, and the DOM readings are easy to check. I gave four stars only because the shipment tracking did not update for a couple of days.

25 Nuttige stem Heb je vragen? Stel ze hier.

Italië

Geverifieerde aankoop

5.0

2026-02-13

DDM made commissioning much easier — worth it.

45 Nuttige stem Heb je vragen? Stel ze hier.

F *** s

Oekraïne

Geverifieerde aankoop

5.0

2026-01-12

We installed a pair of LS-CW411G-80C 1.25G CWDM SFP modules on an approximately 76km single-mode fiber route between a central equipment room and a remote utility site. The route includes several patch panels and a CWDM MUX/DEMUX stage, so we checked both insertion loss and DOM values before putting it into service. The 1410nm wavelength aligned correctly with our channel plan, while the reported TX and RX optical power remained within the published operating window. After a week of continuous production traffic, we saw no CRC growth, no unexpected link resets, and no noticeable optical drift.

146 Nuttige stem Heb je vragen? Stel ze hier.

T *** y

Indonesië

Geverifieerde aankoop

5.0

2026-01-10

Installed as part of a data room-to-warehouse connection over long single-mode fiber. The module was recognized without any configuration headache, and the LC duplex polarity was easy to verify.

103 Nuttige stem Heb je vragen? Stel ze hier.

O *** l

Bulgarije

Geverifieerde aankoop

5.0

2025-12-15

We received the correct quantity for a multi-site deployment, and every unit passed our incoming inspection. Shipping took two extra business days beyond the original estimate, so we adjusted the installation schedule slightly.

21 Nuttige stem Heb je vragen? Stel ze hier.

Hij

Brazilië

Geverifieerde aankoop

5.0

2025-12-01

Clean 1410nm CWDM link at 80km, and DOM readings look spot on.

49 Nuttige stem Heb je vragen? Stel ze hier.

Mijn

Zuid-Afrika

Geverifieerde aankoop

5.0

2025-11-25

We deployed these in a municipal-style fiber ring with several CWDM wavelengths. The 1410nm channel coexists well with the rest of the plan, and the unit has held a steady 1Gbps connection. Solid performance for the price.

84 Nuttige stem Heb je vragen? Stel ze hier.

G *** h

Turkije

Geverifieerde aankoop

5.0

2025-11-08

We deployed this LS-CW411G-80C 1410nm CWDM SFP on a 68km inter-building route that shares a passive CWDM backbone with several other wavelengths. Installation was simple: clean the Duplex LC connectors, confirm fiber polarity, match the 1410nm MUX port, and monitor the DOM values after link-up. The link settled quickly at 1Gbps and remained error-free through overnight replication traffic. We especially liked being able to collect temperature, voltage, Tx power, and Rx power remotely during the acceptance test. For an enterprise long-haul SMF connection, this is a reliable 80km CWDM optic.

121 Nuttige stem Heb je vragen? Stel ze hier.

Spanje

Geverifieerde aankoop

5.0

2025-10-11

Stable 1410nm channel performance in our CWDM MUX system.

52 Nuttige stem Heb je vragen? Stel ze hier.

D.w.z

Ireland

Geverifieerde aankoop

5.0

2025-09-23

We use these modules for 1Gbps transport links supporting distributed sites and low-bandwidth cellular backhaul equipment. One advantage of this 1410nm CWDM SFP is that it lets us expand capacity over the same single-mode fiber plant without pulling another cable. During acceptance testing, the modules maintained stable links through the passive CWDM system, and optical monitoring allowed the NOC to establish baseline TX/RX levels for future troubleshooting. The Duplex LC port is convenient because it matches our standard patching practice, while the 80km rating provides useful margin for routes that may be extended later. For teams managing long optical paths, having DOM/DDM data is much better than relying on link LEDs alone.

159 Nuttige stem Heb je vragen? Stel ze hier.

S *** s

Nieuw Zeeland

Geverifieerde aankoop

5.0

2025-09-06

We needed an 80km 1G SFP rather than a short-reach module because the far site is well outside our normal metro footprint. This model gave us the reach plus CWDM wavelength separation we needed. DOM is a useful bonus for ongoing maintenance.

121 Nuttige stem Heb je vragen? Stel ze hier.

Als

Singapore

Geverifieerde aankoop

5.0

2025-08-29

Ordered several 1G CWDM SFP 1410nm 80km modules for a campus fiber project. All units were recognized correctly, and the DDM values were helpful for checking received optical power before final handover. Good choice for a long-distance CWDM deployment.

105 Nuttige stem Heb je vragen? Stel ze hier.

P *** t

Oostenrijk

Geverifieerde aankoop

5.0

2025-08-02

Great option for extending 1G Ethernet over single-mode fiber where 1410nm is available on the CWDM multiplexer. Low effort to deploy, stable link status, and readable optical diagnostics. ^_^

128 Nuttige stem Heb je vragen? Stel ze hier.

J *** G

Republiek Korea

Geverifieerde aankoop

5.0

2025-07-22

Reliable 80km CWDM SFP optical module for our single-mode fiber ring.

71 Nuttige stem Heb je vragen? Stel ze hier.

J *** s

Israël

Geverifieerde aankoop

5.0

2025-07-15

Our team used the LS-CW411G-80C to replace aging optics on a long campus-to-site link that was intermittently difficult to troubleshoot. The change was not about raw bandwidth — the circuit is only 1Gbps — but about restoring visibility and ensuring the correct 1410nm CWDM wavelength on the shared fiber. Once installed, DDM immediately gave us useful baseline temperature, transmit power, receive power, and supply information. The connection has remained stable during scheduled backup windows and daytime production loads. For commercial 1G CWDM applications, this SFP module offers a sensible balance of reach, diagnostics, and deployment simplicity.

137 Nuttige stem Heb je vragen? Stel ze hier.

C *** n

Russische Federatie

Geverifieerde aankoop

5.0

2025-06-21

This 1410nm SFP optical module was a direct fit for an existing CWDM network where we needed an additional wavelength. It is compact, the latch feels solid, and the 1.25Gbps connection has been stable during normal office and backup traffic. No extra tuning needed.

98 Nuttige stem Heb je vragen? Stel ze hier.

C *** n

Roemenië

Geverifieerde aankoop

5.0

2025-05-29

Integrated this 1410nm SFP module into an existing 8-channel passive CWDM multiplexer. Insertion loss through the MUX filter was minimal, leaving plenty of power headroom for our long-span fiber run.

77 Nuttige stem Heb je vragen? Stel ze hier.

L *** e

Nederland

Geverifieerde aankoop

5.0

2025-05-11

Good optical budget for long-haul campus connectivity.

73 Nuttige stem Heb je vragen? Stel ze hier.

L *** d

Hongarije

Geverifieerde aankoop

5.0

2025-03-27

Everything tested correctly on arrival, including the duplex LC ports and DDM monitoring. The individual packaging was secure, but the bulk box could use a little more internal padding for international deliveries.

33 Nuttige stem Heb je vragen? Stel ze hier.

F *** s

Maleisië

Geverifieerde aankoop

5.0

2025-03-16

Our network team likes having SFF-8472 diagnostics available on long fiber runs. With this 80km CWDM SFP module, we can watch TX/RX power and temperature remotely instead of waiting for a field visit. That alone saves time.

91 Nuttige stem Heb je vragen? Stel ze hier.

H *** l

Finland

Geverifieerde aankoop

5.0

2025-02-16

For a multi-building enterprise fiber refresh, we needed a 1G SFP transceiver that could preserve available fiber pairs and work within our existing CWDM design. This 1410nm 80km SFP module was selected for one of the longer routes, then validated through switch recognition, DOM polling, sustained throughput testing, and planned failover. The DFB transmitter and PIN receiver combination delivered clean readings, and the SFF-8472 digital diagnostics were visible through our normal monitoring stack. We also verified the commercial 0–70°C range is suitable for our climate-controlled MDF and IDF spaces. It is not intended as an industrial-temperature module, but for indoor enterprise and data-room applications, it has performed exactly as expected.

132 Nuttige stem Heb je vragen? Stel ze hier.

T *** l

Noorwegen

Geverifieerde aankoop

5.0

2025-01-25

We used the LS-CW411G-80C module to extend a 1G uplink between two offices on existing single-mode fiber. The 1410nm CWDM channel matched our passive MUX/DEMUX plan, and the Duplex LC connection was straightforward. The link came up immediately and has stayed stable.

93 Nuttige stem Heb je vragen? Stel ze hier.