Alle Categorieën
SFP-modules
Services
Support
Over Ons
Informatiebronnen
Zorg voor uw zaken met een verscheidenheid aan vertrouwde betalingsopties.
Gebruik het bestelnummer of trackingnummer om de verzendstatus te controleren.
Ontvang snel een offerte en profiteer van een professionelere service.
Help uw budget en uitgaven beter te beheren.
Ondersteuning voor gratis monsters, behaal uw testresultaten efficiënt.
Professionele teamondersteuning en service, om uw problemen op tijd op te lossen.
Stel ons gerust al uw vragen, wij helpen u 24/7.
Ontvang snel uw offerte en bied u een professionelere service.
Ontmoet ons en leer onze missie, overtuiging, service en meer kennen.
Vind onze locaties en kom nauw met ons in contact.
Kwaliteitsbeheer, testen, compatibiliteit en wereldwijde naleving.
Rondleiding door het laboratorium, optische testopstelling, compatibiliteitstool en testaanvragen.
Ontdek het laatste nieuws en evenementen in de buurt l-p.com
Een diepgaande analyse van technische handleidingen, industriestandaarden en inzichten in SFP-compatibiliteit.
Gedetailleerde productbenchmarks en vergelijkingen naast elkaar helpen u bij het kiezen van de juiste module.
Ontdek praktische connectiviteitsoplossingen voor datacenters, bedrijven en telecomnetwerken.
Essentiële tips voor het kiezen van datasnelheden, transmissieafstanden en connectortypes.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Operating at 1350nm on the CWDM grid, the LS-CW351G-80C SFP module delivers 1Gbps data rates and integrates a DFB laser with a PIN photodiode for SMF reach up to 80km. It operates reliably across a case temperature range of 0 to +70°C and includes real-time digital diagnostic monitoring for optical power, temperature, voltage, and bias current. The module adheres to SFP MSA and CWDM wavelength tolerances, with typical transmit optical power and receiver sensitivity specified for the full 80km link budget.
| LINK-PP Onderdeel nummer | LS-CW351G-80C | Naam van de leverancier | LINK-PP |
| Form Factor | SFP | Max. Gegevenssnelheid | 1.25Gbps |
| Golflengte | 1350nm | Max. Kabelafstand | 80km |
| connector | Duplex-LC | Media | SMF |
| Zender Type | DFB | Type ontvanger | PIN |
| TX Power | -1 tot + 4dBm | RX-kracht | -26 tot -1dBm |
| receiver Gevoeligheid | -26dBm | receiver Overload | -1dBm |
| EMC (Elektromagnetische Communicatie) | ondersteunde | DDM-ondersteuning | Ja |
| Bedrijfstemperatuurbereik | 0 tot 70 ° C | protocollen | SFP MSA, SFF-8472 |
LINK-PP LS-CW351G-80C is a commercial-grade 1350nm CWDM SFP transceiver that delivers 1Gbps data rates over single-mode fiber up to 80km. It features a duplex LC interface, digital diagnostic monitoring (DDM) for real-time operation checks, and operates within 0 to +70°C case temperature. This module combines CWDM technology with long-reach capability for efficient fiber utilization.
This optical transceiver module follows the hot-pluggable SFP footprint and is fully compliant with the SFP MSA. It allows easy installation and replacement without powering down the system. The electrical interface meets the MSA-defined pinout and signal requirements.
The 1Gbps data rate provides sufficient bandwidth for optical multiplexing backbones that aggregate multiple lower-speed links. This module serves as a cost-effective transceiver in CWDM-based backbone networks, supporting point-to-point connections over long spans.
The CWDM technology employed in this module enables multiple channels to share a single fiber by using different wavelengths. It reduces the need for additional fiber strands, thus improving fiber utilization efficiency in metro and access networks.
The 1350nm wavelength is one of the standard CWDM grid channels, allowing this module to coexist with other CWDM transceivers in the same fiber. It provides a specific transmission window with low attenuation for single-mode fiber.
The 80km transmission reach is achieved through the use of a DFB laser and a PIN photodiode with optimized sensitivity. This module can drive signals across long-distance metro rings without requiring intermediate amplification.
The duplex LC interface provides a standard and reliable physical connection for single-mode fiber patch cords. It ensures low insertion loss and easy polarity management in dense patch panels.
The DDM function continuously monitors key parameters such as Rx/Tx optical power, operating temperature, supply voltage, and laser bias current. It allows the host system to detect link degradation or fault conditions in real time, facilitating proactive maintenance.
| Foto's | ID KAART# | Beschrijving | Prijs | Voorraad | Winkelmand |
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} Verkocht
Carrier
Kosten Levertijd Tracking
Over ons
Kosten Tijd
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Moet worden onderhandeld {{shipitem.datemin}}-{{shipitem.datemax}} dagen Beschikbaar
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}