Envío gratis: 88,11 €+ (transceptores y jaulas), 534,00 €+ (otros productos). Para cantidades mayores o precios personalizados, contáctenos directamente.
¿Necesitas ayuda?
Charla en vivo con nosotros
Live Chat
¿Quieres llamar?

+ 86-752-3386717

Spain · Español · EUR
  • Ocúpese de sus negocios con una variedad de opciones de pago confiables.

  • Utilice el número de pedido o el número de seguimiento para verificar el estado del envío.

  • Obtenga su cotización rápidamente y le ofreceremos un servicio más profesional.

  • Ayude a administrar mejor su presupuesto y gastos.

  • Profundice en guías técnicas, estándares de la industria y conocimientos de compatibilidad SFP.

  • Comparaciones detalladas de productos y puntos de referencia para ayudarlo a elegir el módulo adecuado.

  • Explore soluciones de conectividad del mundo real para centros de datos, empresas y redes de telecomunicaciones.

  • Consejos esenciales para elegir velocidades de datos, distancias de transmisión y tipos de conectores.

Seleccione el tipo de moneda
USD - El dólar de EE.UU.
EUR - Euro
GBP - Libra esterlina
CAD - Dólar canadiense
€ - Dólar australiano
JPY - Yen Japonés
SEK - Corona sueca
NOK - Corona noruega
IDR - Rupias de Indonesia
BRL - Real brasileño
THB - Baht de Tailandia
LS-DAC1110-7MN 7m (23ft) 10g sfp+ to sfp+ passive copper twinax cable
Haga clic para abrir la vista ampliada

LINK-PP Cable twinax de cobre pasivo LS-DAC1110-7MN de 7 m (23 pies) y 10G SFP+ a SFP+

Resumen del producto

Producto
LINK-PP Cable twinax de cobre pasivo LS-DAC1110-7MN de 7 m (23 pies) y 10G SFP+ a SFP+
(SKU)
228004
P / N
LS-DAC1110-7MN
Precio
28,48 €
Stock
128 en existencia
Vendido
710
Precio unitario 28,48 €
Usuarios nuevos: 8,90 € Cupón en tu primer pedido
Código linkpp2610
Para pedidos superiores a 890,00 € Obtén 13,35 € DESC
Código Linkpp15
Para pedidos superiores a 2.670,00 € Obtén 44,50 € DESC
Código Linkpp50
Para pedidos superiores a 4.450,00 € Obtén 89,00 € DESC
Código Linkpp100
Fabricar: LINK-PPP / N: LS-DAC1110-7MNSKU: 228004

LINK-PP mas originalesHoja de Datostodas las descargas

Precios por volumen Niveles online · Cantidad mayor o precio personalizado bajo petición
28.48 €
1–99 piezas
27.06 €
100–999 piezas
26.20 €
1,000–2,999 piezas
25.35 €
3,000–5,999 piezas
24.49 €
≥6,000 piezas

¿Necesita una cantidad superior a estos niveles o desea negociar el precio?

Disponible:
128 en existencia
Envío
20,79 €
a España vía IP de FedEx
Tiempo de entrega estimado : 3 - 6 día.
Garantía de 5 años Devoluciones 15-Dias Intercambio de 15 días
Garantía
  • Ofrecemos una garantía líder en el sector de 5 años.
  • Lea la tabla para detalles de la garantía de todos los productos.
Devoluciones y cambio
  • Los reembolsos se recibirán aproximadamente 5 días hábiles después de la recepción de los artículos devueltos.
  • Los artículos en stock para su reemplazo se pueden enviar en un plazo de 1 día hábil.
  • Lea la política de devoluciones completa para detalles.
Sobre envio libre 88,11 €.
O bien, envíe con su propia cuenta de UPS / FedEx / DHL al finalizar la compra (0,00 € envío).
Cantidad:
Precio Total:
28,48 €

LINK-PP Cable de cobre de conexión directa SFP+ 10G LS-DAC1110-7MN de 7 m (23 pies) (7 metros, pasivo, SFP+ a SFP+, 24AWG)

El LINK-PP El cable de conexión directa LS-DAC1110-7MN 10G SFP+ cumple con las especificaciones SFF-8431, SFF-8432 y SFF-8472. Está disponible en varios calibres de cable, desde 30 hasta 24 AWG, con diversas longitudes (hasta 7 m). El cable de cobre 10G SFP+ ofrece una conectividad rentable para establecer una conexión de 10 Gigabit a corta distancia dentro de un rack o entre racks adyacentes en centros de datos.

LINK-PP Número de refacción LS-DAC1110-7MN Nombre del vendedor LINK-PP
Tipo de conector SFP + a SFP + Velocidad de datos máxima 10.3125Gbps
Longitud del cable 7m Tipo de cable Twinax pasivo
Radio de curva mínimo
30 mm Wire AWG
24AWG
Medios Cobre Alimentación eléctrica 3.3V
Material de la chaqueta PVC (OFNR) Rango de temperatura de funcionamiento 0 a 70 ° C
Protocolos 1 puerto InfiniBand QDR, DDR, SDR, Ethernet de 10 Gigabit, Fibre Channel Aplicación 10G Ethernet

Tabla de comparación de modelos

LINK-PP

Productos a juego

Fotos NÚMERO DE LA TARJETA DE IDENTIDA Mareas Ideales para Lecciones Precio Stock Añadir al Carrito

Descargar

Dibujo de producto LS-DAC1110-xxN.pdf

Preguntas y Respuestas

Aún no hay preguntas

Sé el primero en preguntar sobre las especificaciones, la compatibilidad o el plazo de entrega.

¿Alguna pregunta?
  • A:
    The usual failure mode is a rising error count on one lane rather than a hard link down, because a partial break in a twinax pair degrades the signal instead of killing it. That means you can catch it early by monitoring CRC and FEC corrected counters on the port. If a port that has been clean for months starts showing corrected errors that climb steadily, suspect the cable or the connector before the switch. A physical inspection for a kink or a crushed section usually confirms it. by LINK-PP Soporte técnico
  • A:
    The difference between 1m and 7m of copper is roughly 30 nanoseconds of propagation delay. For storage replication, even synchronous replication, that is negligible compared with the processing and protocol overhead at each end. Where length does matter is in extremely latency sensitive trading or instrumentation systems, and those would not be using 7m passive copper in the first place. For normal enterprise storage traffic, the length difference is not measurable in application terms. by LINK-PP Soporte técnico
  • A:
    A single 90 degree corner is fine as long as the bend radius stays above the 30mm minimum, which usually means a radius guide or a gentle sweep rather than a sharp corner. What you should avoid is repeated bending at the same point, because the conductor will work harden and the impedance will shift. Install it once, dress it properly, and do not use it as a cable you unplug and re route frequently. If the tray has a genuine sharp corner, add a corner guide. by LINK-PP Soporte técnico
  • A:
    7m is at the practical limit for passive copper at 10G, which is why this part uses 24AWG and why the assembly is noticeably heavier than the short versions. It works, but the margin is thinner than at 1m, so the quality of the switch cages and the care taken during installation matter more. If your run is genuinely 7m and you cannot shorten it, copper is still viable and cheaper than optics. If the run is longer, or if the path is difficult, fibre is the better answer. by LINK-PP Soporte técnico

Reseñas

  • 4.9

    19 reseñas

  • 5 estrellas
    95%
    4 estrellas
    5%
    3 estrellas
    0%
    2 estrellas
    0%
    1 estrellas
    0%
  • todos los comentarios (19)
No hay datos
R *** n
Alemania
Compra verificada
5.0
2026-09-11
Used between a pair of switches in a lab where the racks are further apart than usual. Has been up for five months with no flaps.
C *** k
Saudi Arabia
Compra verificada
5.0
2026-08-12
Labels every metre along the jacket, which is useful when you are pulling a bundle and want to know how much is left.
S t
Ireland
Compra verificada
5.0
2026-07-12
Not flexible, so route it before you connect.
E *** k
Bélgica
Compra verificada
4.0
2026-06-21
Signal is fine but the stiffness is a real constraint. We had to reroute because it would not make the corner into the manager without a hard bend.
Un
Thailand
Compra verificada
5.0
2026-04-13
We had a specific problem: a pair of switches that could not be moved and were just too far apart for the 5m part once the tray was included. Fibre would have meant new optics on both sides and a media converter on one. This cable solved it for a fraction of the cost and has been running without intervention since the spring maintenance window.
Compra verificada
.0
Demostración comentario

By 

No hay comentarios aún

Sé el primero en compartir tu experiencia con este producto.

Escribe tu Opinión
|
Vendido