Envío gratis: 88,11 €+ (transceptores y jaulas), 534,00 €+ (otros productos). Para cantidades mayores o precios personalizados, contáctenos directamente.
¿Necesitas ayuda?
Charla en vivo con nosotros
Live Chat
¿Quieres llamar?

+ 86-752-3386717

Spain · Español · EUR
  • Ocúpese de sus negocios con una variedad de opciones de pago confiables.

  • Utilice el número de pedido o el número de seguimiento para verificar el estado del envío.

  • Obtenga su cotización rápidamente y le ofreceremos un servicio más profesional.

  • Ayude a administrar mejor su presupuesto y gastos.

  • Profundice en guías técnicas, estándares de la industria y conocimientos de compatibilidad SFP.

  • Comparaciones detalladas de productos y puntos de referencia para ayudarlo a elegir el módulo adecuado.

  • Explore soluciones de conectividad del mundo real para centros de datos, empresas y redes de telecomunicaciones.

  • Consejos esenciales para elegir velocidades de datos, distancias de transmisión y tipos de conectores.

Seleccione el tipo de moneda
USD - El dólar de EE.UU.
EUR - Euro
GBP - Libra esterlina
CAD - Dólar canadiense
€ - Dólar australiano
JPY - Yen Japonés
SEK - Corona sueca
NOK - Corona noruega
IDR - Rupias de Indonesia
BRL - Real brasileño
THB - Baht de Tailandia
LS-DAC1110-1MN 1m (3ft) 10g sfp+ to sfp+ passive copper twinax cable
Haga clic para abrir la vista ampliada

LINK-PP Cable twinax de cobre pasivo LS-DAC1110-1MN de 1 m (3 pies) y 10G SFP+ a SFP+

Resumen del producto

Producto
LINK-PP Cable twinax de cobre pasivo LS-DAC1110-1MN de 1 m (3 pies) y 10G SFP+ a SFP+
(SKU)
227905
P / N
LS-DAC1110-1MN
Precio
10,68 €
Stock
560 en existencia
Vendido
941
Precio unitario 10,68 €
Usuarios nuevos: 8,90 € Cupón en tu primer pedido
Código linkpp2610
Para pedidos superiores a 890,00 € Obtén 13,35 € DESC
Código Linkpp15
Para pedidos superiores a 2.670,00 € Obtén 44,50 € DESC
Código Linkpp50
Para pedidos superiores a 4.450,00 € Obtén 89,00 € DESC
Código Linkpp100
Fabricar: LINK-PPP / N: LS-DAC1110-1MNSKU: 227905

LINK-PP mas originalesHoja de Datostodas las descargas

Precios por volumen Niveles online · Cantidad mayor o precio personalizado bajo petición
10.68 €
1–99 piezas
10.15 €
100–999 piezas
9.83 €
1,000–2,999 piezas
9.51 €
3,000–5,999 piezas
9.18 €
≥6,000 piezas

¿Necesita una cantidad superior a estos niveles o desea negociar el precio?

Disponible:
560 en existencia
Envío
20,79 €
a España vía IP de FedEx
Tiempo de entrega estimado : 3 - 6 día.
Garantía de 5 años Devoluciones 15-Dias Intercambio de 15 días
Garantía
  • Ofrecemos una garantía líder en el sector de 5 años.
  • Lea la tabla para detalles de la garantía de todos los productos.
Devoluciones y cambio
  • Los reembolsos se recibirán aproximadamente 5 días hábiles después de la recepción de los artículos devueltos.
  • Los artículos en stock para su reemplazo se pueden enviar en un plazo de 1 día hábil.
  • Lea la política de devoluciones completa para detalles.
Sobre envio libre 88,11 €.
O bien, envíe con su propia cuenta de UPS / FedEx / DHL al finalizar la compra (0,00 € envío).
Cantidad:
Precio Total:
10,68 €

LINK-PP Cable de cobre de conexión directa SFP+ 10G LS-DAC1110-1MN de 1 m (3 pies) (1 metros, pasivo, SFP+ a SFP+, 30AWG)

El LINK-PP El cable de conexión directa LS-DAC1110-1MN 10G SFP+ cumple con las especificaciones SFF-8431, SFF-8432 y SFF-8472. Está disponible en varios calibres de cable, desde 30 hasta 24 AWG, con diversas longitudes (hasta 7 m). El cable de cobre 10G SFP+ ofrece una conectividad rentable para establecer una conexión de 10 Gigabit a corta distancia dentro de un rack o entre racks adyacentes en centros de datos.

LINK-PP Número de refacción LS-DAC1110-1MN Nombre del vendedor LINK-PP
Tipo de conector SFP + a SFP + Velocidad de datos máxima 10.3125Gbps
Longitud del cable 1m Tipo de cable Twinax pasivo
Radio de curva mínimo
23 mm Wire AWG
30AWG
Medios Cobre Alimentación eléctrica 3.3V
Material de la chaqueta PVC (OFNR) Rango de temperatura de funcionamiento 0 a 70 ° C
Protocolos 1 puerto InfiniBand QDR, DDR, SDR, Ethernet de 10 Gigabit, Fibre Channel Aplicación 10G Ethernet

Tabla de comparación de modelos

LINK-PP

Productos a juego

Fotos NÚMERO DE LA TARJETA DE IDENTIDA Mareas Ideales para Lecciones Precio Stock Añadir al Carrito

Descargar

Dibujo de producto LS-DAC1110-xxN.pdf

Preguntas y Respuestas

Aún no hay preguntas

Sé el primero en preguntar sobre las especificaciones, la compatibilidad o el plazo de entrega.

¿Alguna pregunta?
  • A:
    At 1m, FEC is not needed for signal integrity and most 10G ports do not enable it by default. Enabling it adds a small amount of latency and is generally unnecessary at this length. The exception is if your platform requires FEC for a specific port mode or if you are aggregating with links that already use it. In that case consistency across the bundle matters more than the individual cable length, so match the setting to the rest of the group. by LINK-PP Soporte técnico
  • A:
    The assembly is rated 0 to 70℃, so 60℃ internal is within the rating but leaves only 10℃ of margin. The connector shell temperature will be higher than ambient because it sits against the switch cage, which is itself a heat source. In an outdoor enclosure I would measure the actual cage temperature rather than the air temperature before committing. If the cage runs above about 65℃, consider an industrial rated assembly or move the switch to a cooler part of the enclosure. by LINK-PP Soporte técnico
  • A:
    Cost, power and simplicity. Copper removes two transceivers per link, which cuts the bill of materials substantially, removes the heat those optics generate, and eliminates a class of failure related to module firmware and coding. The trade off is distance: copper is limited to a few metres while fibre can go much further. At 1m inside a cabinet, copper is almost always the better engineering choice unless you have a specific reason to keep the link optical. by LINK-PP Soporte técnico
  • A:
    Start with the connector, not the cable. A partially seated SFP+ latch will cause intermittent loss that looks like a cable fault. Reseat both ends and confirm the latch clicks. If that does not fix it, swap the cable to a known good port to separate a port problem from a cable problem. After that, check whether the port has any error counters climbing, and whether the flap correlates with someone working in the cabinet. Physical disturbance is the most common cause of flaps on passive copper that was previously stable. by LINK-PP Soporte técnico

Reseñas

  • 4.9

    19 reseñas

  • 5 estrellas
    95%
    4 estrellas
    5%
    3 estrellas
    0%
    2 estrellas
    0%
    1 estrellas
    0%
  • todos los comentarios (19)
No hay datos
E *** n
Canada
Compra verificada
5.0
2026-06-06
Ran a 10G iperf test between two hosts on these and got line rate with no retransmits, which is what you want from a passive assembly.
S *** k
Turquía
Compra verificada
5.0
2026-03-15
I compared the cost against buying SFP+ optics and patch cords for the same forty links. The copper came out at roughly a third of the price, with no transceiver to fail and no fibre cleaning to worry about. The only trade off is distance, and at 1m that is not a trade off at all. Payback was immediate.
T *** s
Philippines
Compra verificada
5.0
2026-01-12
The connector latches are the metal tab type and they release cleanly. On cheaper cables the plastic tab snaps after a few dozen insertions.
N *** n
Australia
Compra verificada
5.0
2025-12-03
This is the length we use for top of rack to the first server U. One metre leaves a small service loop without coiling excess behind the rail.
R *** s
Singapore
Compra verificada
5.0
2025-11-11
We ordered forty for a floor refresh. Delivery came in two boxes, both labelled with the part number and length, which made goods in easy.
Compra verificada
.0
Demostración comentario

By 

No hay comentarios aún

Sé el primero en compartir tu experiencia con este producto.

Escribe tu Opinión
|
Vendido