Envío gratis: 88,11 €+ (transceptores y jaulas), 534,00 €+ (otros productos). Para cantidades mayores o precios personalizados, contáctenos directamente.
¿Necesitas ayuda?
Charla en vivo con nosotros
Live Chat
¿Quieres llamar?

+ 86-752-3386717

Spain · Español · EUR
  • Ocúpese de sus negocios con una variedad de opciones de pago confiables.

  • Utilice el número de pedido o el número de seguimiento para verificar el estado del envío.

  • Obtenga su cotización rápidamente y le ofreceremos un servicio más profesional.

  • Ayude a administrar mejor su presupuesto y gastos.

  • Profundice en guías técnicas, estándares de la industria y conocimientos de compatibilidad SFP.

  • Comparaciones detalladas de productos y puntos de referencia para ayudarlo a elegir el módulo adecuado.

  • Explore soluciones de conectividad del mundo real para centros de datos, empresas y redes de telecomunicaciones.

  • Consejos esenciales para elegir velocidades de datos, distancias de transmisión y tipos de conectores.

Seleccione el tipo de moneda
USD - El dólar de EE.UU.
EUR - Euro
GBP - Libra esterlina
CAD - Dólar canadiense
€ - Dólar australiano
JPY - Yen Japonés
SEK - Corona sueca
NOK - Corona noruega
IDR - Rupias de Indonesia
BRL - Real brasileño
THB - Baht de Tailandia
LS-DAC1110-5MN 5m (16ft) 10g sfp+ to sfp+ passive copper twinax cable
Haga clic para abrir la vista ampliada

LINK-PP Cable twinax de cobre pasivo LS-DAC1110-5MN de 5 m (16 pies) y 10G SFP+ a SFP+

Resumen del producto

Producto
LINK-PP Cable twinax de cobre pasivo LS-DAC1110-5MN de 5 m (16 pies) y 10G SFP+ a SFP+
(SKU)
227955
P / N
LS-DAC1110-5MN
Precio
17,80 €
Stock
290 en existencia
Vendido
710
Precio unitario 17,80 €
Usuarios nuevos: 8,90 € Cupón en tu primer pedido
Código linkpp2610
Para pedidos superiores a 890,00 € Obtén 13,35 € DESC
Código Linkpp15
Para pedidos superiores a 2.670,00 € Obtén 44,50 € DESC
Código Linkpp50
Para pedidos superiores a 4.450,00 € Obtén 89,00 € DESC
Código Linkpp100
Fabricar: LINK-PPP / N: LS-DAC1110-5MNSKU: 227955

LINK-PP mas originalesHoja de Datostodas las descargas

Precios por volumen Niveles online · Cantidad mayor o precio personalizado bajo petición
17.80 €
1–99 piezas
16.91 €
100–999 piezas
16.38 €
1,000–2,999 piezas
15.84 €
3,000–5,999 piezas
15.31 €
≥6,000 piezas

¿Necesita una cantidad superior a estos niveles o desea negociar el precio?

Disponible:
290 en existencia
Envío
20,79 €
a España vía IP de FedEx
Tiempo de entrega estimado : 3 - 6 día.
Garantía de 5 años Devoluciones 15-Dias Intercambio de 15 días
Garantía
  • Ofrecemos una garantía líder en el sector de 5 años.
  • Lea la tabla para detalles de la garantía de todos los productos.
Devoluciones y cambio
  • Los reembolsos se recibirán aproximadamente 5 días hábiles después de la recepción de los artículos devueltos.
  • Los artículos en stock para su reemplazo se pueden enviar en un plazo de 1 día hábil.
  • Lea la política de devoluciones completa para detalles.
Sobre envio libre 88,11 €.
O bien, envíe con su propia cuenta de UPS / FedEx / DHL al finalizar la compra (0,00 € envío).
Cantidad:
Precio Total:
17,80 €

LINK-PP Cable de cobre de conexión directa SFP+ 10G LS-DAC1110-5MN de 5 m (16 pies) (5 metros, pasivo, SFP+ a SFP+, 24AWG)

El LINK-PP El cable de conexión directa LS-DAC1110-5MN 10G SFP+ cumple con las especificaciones SFF-8431, SFF-8432 y SFF-8472. Está disponible en varios calibres de cable, desde 30 hasta 24 AWG, con diversas longitudes (hasta 7 m). El cable de cobre 10G SFP+ ofrece una conectividad rentable para establecer una conexión de 10 Gigabit a corta distancia dentro de un rack o entre racks adyacentes en centros de datos.

LINK-PP Número de refacción LS-DAC1110-5MN Nombre del vendedor LINK-PP
Tipo de conector SFP + a SFP + Velocidad de datos máxima 10.3125Gbps
Longitud del cable 5m Tipo de cable Twinax pasivo
Radio de curva mínimo
30 mm Wire AWG
24AWG
Medios Cobre Alimentación eléctrica 3.3V
Material de la chaqueta PVC (OFNR) Rango de temperatura de funcionamiento 0 a 70 ° C
Protocolos 1 puerto InfiniBand QDR, DDR, SDR, Ethernet de 10 Gigabit, Fibre Channel Aplicación 10G Ethernet

Tabla de comparación de modelos

LINK-PP

Productos a juego

Fotos NÚMERO DE LA TARJETA DE IDENTIDA Mareas Ideales para Lecciones Precio Stock Añadir al Carrito

Descargar

Dibujo de producto LS-DAC1110-xxN.pdf

Preguntas y Respuestas

Aún no hay preguntas

Sé el primero en preguntar sobre las especificaciones, la compatibilidad o el plazo de entrega.

¿Alguna pregunta?
  • A:
    You lose the electrical isolation that fibre provides, which matters if the two ends are on different power systems or different ground potentials. You also lose the ability to test the link with an optical power meter, so fault finding becomes a swap and check process. On the positive side you remove two transceivers, their heat and their firmware, and you gain a link that a junior engineer can replace without any configuration knowledge. For links inside the same row, that trade is usually worth it. by LINK-PP Soporte técnico
  • A:
    Keep it separated. Passive copper carrying high speed data is susceptible to noise coupling from mains cables, and while the differential signalling is reasonably robust, a long parallel run next to power is asking for trouble. Most standards require a minimum separation, often 50mm or more depending on the voltage and the tray construction. Cross mains cables at right angles if you must cross, and never run them in the same bundle for any distance. by LINK-PP Soporte técnico
  • A:
    5m gives you about 50cm of margin, which is workable but tight once you allow for a service loop at each end. If your measurement of 4.5m is approximate, the 7m is the safer choice because the extra length can be dressed in a gentle curve without a coil. The penalty for going longer is a slightly heavier cable and marginally more loss, both of which are acceptable. The penalty for going too short is a connector under tension, which is much worse. by LINK-PP Soporte técnico
  • A:
    Because loss per metre increases as the conductor gets thinner, and at 5m a 30AWG assembly would attenuate the 10G signal beyond what the receiver can recover reliably. 24AWG has a larger cross section and lower resistance, which keeps the insertion loss inside the 10GBASE-CU budget at that length. The trade off is mechanical: the cable is thicker and much stiffer, so it needs a different approach to routing than the short assemblies. by LINK-PP Soporte técnico

Reseñas

  • 4.9

    19 reseñas

  • 5 estrellas
    95%
    4 estrellas
    5%
    3 estrellas
    0%
    2 estrellas
    0%
    1 estrellas
    0%
  • todos los comentarios (19)
No hay datos
Tennesse
República de Corea
Compra verificada
5.0
2026-10-24
We needed 10G between cabinets in the same row and did not want another pair of optics, so we tried the 5m version. It has been stable for four months.
I *** k
Ucrania
Compra verificada
5.0
2026-09-02
The jacket is marked with the length every metre, which is handy when you are pulling several of them at once.
Connecticut
Grecia
Compra verificada
5.0
2026-08-01
Six months, twenty four links, zero replacements. I have nothing interesting to report and that is a good thing.
R *** u
Argentina
Compra verificada
5.0
2026-07-25
Cost comparison was straightforward. Two SFP+ optics plus a 5m fibre patch was around four times the price of one of these, and we had a spare optics budget line we could redirect. The links have been up since spring with no intervention, and the switch logs show no CRC errors on any of the twelve.
E *** m
Italia
Compra verificada
5.0
2026-06-15
Twelve of these across two rows, no errors. :)
Compra verificada
.0
Demostración comentario

By 

No hay comentarios aún

Sé el primero en compartir tu experiencia con este producto.

Escribe tu Opinión
|
Vendido