Can this module be connected directly to regular single-mode fiber that is already installed in our network?

Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget.

We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules?

Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports.

Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links?

It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair.

작은 표시: 홈; 제품; 광학 트랜시버 | SFP 모듈; 1/2/4G 트랜시버 모듈; 1G CWDM/DWDM SFP; 203282

확장 된보기를 열려면 클릭하십시오

LINK-PP LS-CW491G-80C 1G SFP CWDM 1490nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈

Name: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈
Brand: LINK-PP
SKU: 203282
Price: 43 USD
Availability: InStock
Rating: 4.9 (25 reviews)

# 203282

프로덕트: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈
SKU: 203282
P / N: LS-CW491G-80C
가격: $ 50
재고: 98 재고
판매: 812
제품 URL: https://www.l-p.com/products/492748.htm

주문 금액이 1000달러 이상이면 15.00달러 할인해 드립니다. 코드: Linkpp15

주문 금액이 3000달러 이상이면 50.00달러 할인해 드립니다. 코드: Linkpp50

주문 금액이 5000달러 이상이면 100.00달러 할인해 드립니다. 코드: Linkpp100

신규 고객: 주문 시 사용 가능한 10달러 쿠폰 제공 코드: linkpp2610

: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈

25 후기 도움이 필요하신가요?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

25개의 리뷰

3 질문

재고 요청

812 판매

$ 50

$600 이상 무료 배송, 더 유리한 가격이 필요한 경우 직접 문의하시기 바랍니다.

수량(개):

단가 :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

제조: LINK-PP

P / N : LS-CW491G-80C

호환 가능 :: Cisco; LINK-PP; Allied Telesis; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

파장 :: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

배송:

협상 예정

무료 배송

배달 할 수 없습니다

에 United States 를 통해 {{now_chooseship?now_chooseship.name:''}}

예상 배달 시간 : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} 일. 자세히보기

5 - 년 보증 30- 일 반품 30일 교환

주식 :

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

수량:

(최소 주문 {{detail_data.prodInfo.minimum_ordered_quantity}} )

배송 불가

총 가격:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

소원에 추가

기술 사양

스펙
비디오
일치하는 제품
다운로드
질문 게시판
고객 리뷰

LINK-PP LS-CW491G-80C 1G SFP 사양

LS-CW491G-80C 1G SFP는 CWDM 인프라에 특화되도록 설계되었으며, 1490nm 광 파장을 사용하여 장거리 전송에서 광섬유 자원 활용도를 극대화합니다. 내장된 DFB 레이저와 PIN 수신기 조합은 단일 모드 광섬유를 통해 최대 80km까지 안정적인 신호 무결성을 보장합니다. 통합 디지털 광 모니터링(DOM) 기능은 광 출력, 작동 온도, 바이어스 전류 및 전압 등의 지표를 실시간으로 추적합니다.

LINK-PP 부품 번호	LS-CW491G-80C	공급 업체 이름	LINK-PP
폼 팩터	SFP	최대 데이터 속도	1.25Gbps
파장	1490nm	최대 케이블 거리	80km
커넥터	이중 LC	미디어	SMF
송신기 유형	DFB	수신기 유형	PIN
TX 전력	-1에서 + 4dBm	수신 전원	-26 ~ -1dBm
수신기 감도	- 26dBm	수신기 과부하	- 1dBm
EMC(전자기 통신)	지원	DOM	지원
작동 온도 범위	0 ~ 70 ° C	프로토콜	SFP MSA、SFF-8472

비디오

일치하는 제품

영화

신분증#

기술설명

가격

재고

장바구니에 담기

다운로드

제품 도면

PDF
LS-CWxx1G-80x.pdf

질문과 답변
질문하기

데이터가 없습니다

Q: Can this module be connected directly to regular single-mode fiber that is already installed in our network? I***t에 의해 on 2026-02-03

A: Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget. 관리자 작성 on 2026-02-04
Q: We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules? H***n 작성 on 2025-11-17

A: Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports. 관리자 작성 on 2025-11-18
Q: Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links? J***l 작성 on 2025-04-21

A: It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair. 관리자 작성 on 2025-04-22

고객 리뷰
리뷰 쓰기

{{stardata.star}}

{{comment.count}} 리뷰
5 별

{{comment.star5}}%

4 별

{{comment.star4}}%

3 별

{{comment.star3}}%

2 별

{{comment.star2}}%

1 스타

{{comment.star1}}%

모든 리뷰 ({{comment.star_num?comment.star_num:comment.count}})

모든 리뷰

별 5 개만

별 4 개만

별 3 개만

별 2 개만

별 1 개만
사진이있는 리뷰 ( {{comment.pic_comment}} )
모든 리뷰보기

데이터가 없습니다

나는 *** e

영국

구매 확인

5.0

2026-06-14

Installed several LS-CW491G-80C modules in our CWDM ring — solid performance.

55 유용한 투표 코멘트

F *** z

남아프리카 공화국

구매 확인

5.0

2026-06-02

We installed these CWDM modules as part of a phased data-center edge refresh. The sites do not need 10G on every route, but they do require resilient, monitored 1G connectivity across long single-mode fiber runs. The 1490nm CWDM channel allowed us to retain existing MUX/DEMUX hardware while adding capacity without trenching new fiber. From an operations standpoint, DOM is the biggest benefit. We set monitoring thresholds around receive optical power and watched the results through our normal device-management workflow. During burn-in and traffic testing, the optics remained stable and there were no link flaps. The compact SFP form factor also made replacement simple in populated switch racks. Great balance of reach, diagnostics, and cost.

95 유용한 투표 코멘트

N *** n

India

구매 확인

5.0

2026-05-11

We ordered these for a CWDM MUX/DEMUX upgrade where 1490nm was the open channel. The LS-CW491G-80C CWDM modules came online quickly and held a stable 1.25Gbps link. Nice option for enterprise fiber networks that still run 1G aggregation.

88 유용한 투표 코멘트

승 ***

러시아 연방

구매 확인

5.0

2026-04-05

We deployed LS-CW491G-80C 1G 1490nm CWDM SFP transceivers across a multi-building industrial campus. The longest installed route was just under 67km after accounting for the patch-panel path, splices, and CWDM MUX/DEMUX insertion loss. The 80km optical budget gave us the operational headroom we wanted rather than designing right at the limit. During commissioning, we checked the DDM/DOM readings from each endpoint and compared the reported TX/RX values against our optical test results. The modules reported consistent information, and the links stayed free of packet loss and CRC alarms under production traffic. For indoor equipment rooms with 0 – 70°C conditions, this is a dependable 1490nm CWDM SFP for 1G backbone expansion.

137 유용한 투표 코멘트

Q ***

Netherlands

구매 확인

5.0

2026-03-21

The DOM information was available in our monitoring platform, including TX/RX optical power and temperature. That is important for us because the fiber route is long and troubleshooting time is expensive. Happy with the module so far.

101 유용한 투표 코멘트

T *** l

이탈리아

구매 확인

5.0

2026-02-16

We tested the module with multiple switch platforms in our lab before rolling it out. It was detected correctly, the link remained stable, and diagnostics were readable through the host interface. Good 1490nm CWDM optical module for the price.

100 유용한 투표 코멘트

G *** g

Japan

구매 확인

5.0

2026-02-03

DOM readings are clean and stable; exactly what our NOC needed.

74 유용한 투표 코멘트

케이 ***

Canada

구매 확인

5.0

2026-01-27

Great value for an 80km CWDM SFP with digital optical monitoring.

77 유용한 투표 코멘트

V *** t

Singapore

구매 확인

5.0

2025-12-18

Good alternative when you need a long-distance 1G CWDM SFP transceiver but do not want to redesign the entire optical network. We used it with Duplex LC single-mode fiber and a CWDM passive system. Traffic has been clean since installation.

115 유용한 투표 코멘트

M *** n

Brazil

구매 확인

5.0

2025-12-04

Used this 1490nm CWDM SFP module to extend a 1GbE connection between two municipal facilities. The Duplex LC SMF connection was straightforward, and the 80km rating gave us enough margin for the route. DOM values matched our field meter closely.

92 유용한 투표 코멘트

F *** h

United States

구매 확인

5.0

2025-11-18

Reliable 1490nm 1G CWDM SFP for our 80km fiber path — linked right up.

61 유용한 투표 코멘트

나는 *** e

뉴질랜드

구매 확인

5.0

2025-11-02

The LS-CW491G-80C SFP modules worked perfectly on our 1490nm CWDM 1G links, and DOM readings were available as expected. One outer shipping carton arrived slightly compressed, although every SFP was individually protected and passed our incoming test. Product performance is five-star; shipping presentation could be a bit better.

29 유용한 투표 코멘트

Z *** n

Thailand

구매 확인

5.0

2025-10-23

Our application was a 1GbE backhaul link between a central server room and several remote telecom cabinets connected through a CWDM transport layer. The LS-CW491G-80C was selected because we specifically needed a commercial-grade 1490nm CWDM SFP with an 80km reach, Duplex LC connector, and DOM support — not a generic 1310nm optic. The installation team used standard LC single-mode jumpers and kept end-face cleaning procedures in place. The links came up immediately after wavelength verification. Over several weeks, receive levels remained comfortably above the -26dBm receiver sensitivity threshold, and the reported optical readings did not drift. This is a strong choice for enterprise CWDM fiber infrastructure where 1.25Gbps capacity is still appropriate.

156 유용한 투표 코멘트

P *** r

대한민국

구매 확인

5.0

2025-10-08

We needed a 1G 1490nm CWDM 80km SFP optical transceiver for an indoor data-room-to-cabinet link. It worked over existing single-mode fiber with LC patch cords and showed usable receive margin. Good procurement experience overall.

83 유용한 투표 코멘트

성

스페인

구매 확인

5.0

2025-09-02

This is a practical commercial-temperature 1G CWDM SFP for indoor telecom rooms. Optical levels stayed stable during normal load, and the PIN receiver sensitivity was sufficient for our long single-mode span. Would order again.

138 유용한 투표 코멘트

G *** s

Malaysia

구매 확인

5.0

2025-08-31

We bought this 1G 1490nm CWDM 80km SFP optical transceiver for a distributed video-surveillance and building-management network. Several remote locations share the same CWDM fiber infrastructure, so the exact wavelength and optical reach were non-negotiable. The LS-CW491G-80C matched the required 1490nm channel and provided enough transmitter power for our engineered path. Our field engineers verified the LC duplex polarity, cleaned every connector, and recorded baseline DOM data at turn-up. The RX levels were within the expected design range, and the modules maintained stable connectivity through regular traffic peaks. It is a commercial-temperature module, so we used it in conditioned indoor cabinets rather than exposed roadside enclosures. For that deployment profile, it has been reliable and easy to manage.

106 유용한 투표 코멘트

J *** e

France

구매 확인

5.0

2025-08-09

This 1.25G 1490nm CWDM SFP was recognized immediately and passed traffic overnight.

79 유용한 투표 코멘트

U *** n

Norway

구매 확인

5.0

2025-07-25

Bought a mixed wavelength batch for a regional fiber ring, including this 1490nm 80km SFP. All modules were clearly separated by wavelength, which avoided installation mistakes. The DFB CWDM transmitter delivered consistent levels at commissioning.

82 유용한 투표 코멘트

O *** s

Mexico

구매 확인

5.0

2025-06-30

Purchased for a small batch of remote-site uplinks. The modules were properly labeled, seated well in standard SFP slots, and the DDM monitoring made acceptance testing much faster. No CRC errors after a week of traffic.

121 유용한 투표 코멘트

H *** n

Indonesia

구매 확인

5.0

2025-06-12

We evaluated this module for a mixed-vendor enterprise network where interoperability, documentation, and repeatability were more important than simply finding the lowest-cost optic. The LS-CW491G-80C CWDM SFP passed our lab checks for 1.25Gbps Ethernet transport, module recognition, and SFF-8472 digital diagnostics. We then rolled out a controlled batch to production locations. The 80km specification is valuable for long campus, metro-edge, and remote-site fiber routes, especially when CWDM channels are already allocated. The reported TX power range of -1 to +4dBm and receiver sensitivity down to -26dBm were aligned with our loss-budget calculations. After deployment, the modules have provided clean links and predictable DOM telemetry. That is exactly what we need for repeatable network maintenance.

119 유용한 투표 코멘트

R *** l

Sweden

구매 확인

5.0

2025-05-19

Our network team used these for a campus CWDM backbone migration instead of pulling additional fiber. The 1490nm channel fit our wavelength plan, and the 1.25G SFP interface kept the project compatible with existing aggregation hardware. Easy win.

92 유용한 투표 코멘트

H *** s

독일

구매 확인

5.0

2025-04-22

Good fit for a Duplex LC single-mode fiber deployment, no drama.

52 유용한 투표 코멘트

J *** n

벨기에

구매 확인

5.0

2025-04-07

Technically, these 80km CWDM SFP modules are solid — stable link, correct wavelength, and no errors during our acceptance test. Delivery took a little longer than expected because our project schedule changed close to dispatch, but the packing and labeling were good. We would still purchase again for the next CWDM expansion.

33 유용한 투표 코멘트

X***y

Philippines

구매 확인

5.0

2025-02-28

This 1490nm 80km CWDM SFP was purchased for a regional access network where spare fiber was limited. We used a CWDM wavelength plan to carry several 1G services over one single-mode fiber pair, and this module occupied the 1490nm channel without interfering with the adjacent channels. The DFB transmitter and PIN receiver combination performed as expected over the measured loss budget. We also ran compatibility and monitoring checks before field deployment. The host recognized the module properly, and the SFF-8472 diagnostics gave the operations team useful TX power, RX power, voltage, temperature, and laser-bias visibility. For NOC teams, that visibility matters because it lets you spot degraded connectors or fiber loss before users report an outage.

128 유용한 투표 코멘트

L *** y

Australia

구매 확인

5.0

2025-01-15

Stable optical power and error-free operation on our long-haul campus link.

53 유용한 투표 코멘트