Can DDM help us detect whether the module is approaching its temperature limit?

Yes. The module’s real-time DDM function can report operating temperature through compatible host equipment. Your NOC can set thresholds or monitor trends to identify abnormal temperature increases before the module reaches its rated limit.

We use 1G Fibre Channel between storage systems at two locations. Can this 1410nm CWDM SFP be used for that link?

Yes. The LS-CW411G-80C supports 1.063Gbps Fibre Channel and can be used for 1G Fibre Channel links over single-mode fiber. For a stable connection, use a matching 1410nm CWDM module at the other end.

Do we need a CWDM MUX/DEMUX to use this 1410nm SFP module?

A CWDM MUX/DEMUX is needed when multiple CWDM wavelengths share one pair of single-mode fibers. If this is a dedicated point-to-point fiber link using only one optical channel, the 1410nm modules can normally connect directly through duplex single-mode fiber without a MUX/DEMUX.

We already have duplex LC-to-LC single-mode patch cords in our network. Can we connect them directly to this 1410nm CWDM SFP?

Yes. The LS-CW411G-80C has a duplex LC interface and is designed for single-mode fiber. You can connect a standard duplex LC-to-LC single-mode patch cord directly to the module. Just make sure the fiber polarity is correct so the transmit and receive paths are properly matched.

Can this module be inserted while the switch is running, or do we need to power it off first?

This module has a hot-pluggable SFP design, so it can normally be inserted or removed while the switch is powered on. After installation, wait a few seconds for the device to detect the module and check the link status.

작은 표시: 홈; 제품; 광학 트랜시버 | SFP 모듈; 1/2/4G 트랜시버 모듈; 1G CWDM/DWDM SFP; 203158

확장 된보기를 열려면 클릭하십시오

LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈

Name: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈
Brand: LINK-PP
SKU: 203158
Price: 42.14 USD
Availability: InStock
Rating: 4.9 (29 reviews)

# 203158

프로덕트: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈
SKU: 203158
P / N: LS-CW411G-80C
가격: $ 49
재고: 132 재고
판매: 768
제품 URL: https://www.l-p.com/products/492624.htm

주문 금액이 1000달러 이상이면 15.00달러 할인해 드립니다. 코드: Linkpp15

주문 금액이 3000달러 이상이면 50.00달러 할인해 드립니다. 코드: Linkpp50

주문 금액이 5000달러 이상이면 100.00달러 할인해 드립니다. 코드: Linkpp100

신규 고객: 주문 시 사용 가능한 10달러 쿠폰 제공 코드: linkpp2610

: LINK-PP LS-CW411G-80C 1G SFP CWDM 1410nm 80km 듀플렉스 LC DOM SMF 광 트랜시버 모듈

29 후기 도움이 필요하신가요?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

29개의 리뷰

5 질문

재고 요청

768 판매

$ 49

$600 이상 무료 배송, 더 유리한 가격이 필요한 경우 직접 문의하시기 바랍니다.

수량(개):

단가 :

$ 49

100

$ 46.55

1000

$ 45.08

3000

$ 43.61

6000

$ 42.14

제조: LINK-PP

P / N : LS-CW411G-80C

호환 가능 :: Cisco; LINK-PP; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

파장 :: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

배송:

협상 예정

무료 배송

배달 할 수 없습니다

에 United States 를 통해 {{now_chooseship?now_chooseship.name:''}}

예상 배달 시간 : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} 일. 자세히보기

5 - 년 보증 30- 일 반품 30일 교환

주식 :

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

수량:

(최소 주문 {{detail_data.prodInfo.minimum_ordered_quantity}} )

배송 불가

총 가격:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

소원에 추가

기술 사양

스펙
비디오
일치하는 제품
다운로드
질문 게시판
고객 리뷰

LINK-PP LS-CW411G-80C 1G SFP 사양

LS-CW411G-80C is a 1410nm CWDM SFP module engineered for 1G data links, integrating a DFB laser and PIN photodiode to enable 80km reach over single-mode fiber under a 0 – 70°C operating range. Real-time digital optical monitoring is embedded to provide continuous readouts of TX power, RX power, bias current, temperature, and supply voltage, ensuring precise link status visibility.

LINK-PP 부품 번호	LS-CW411G-80C	공급 업체 이름	LINK-PP
폼 팩터	SFP	최대 데이터 속도	1.25Gbps
파장	1410nm	최대 케이블 거리	80km
커넥터	이중 LC	미디어	SMF
송신기 유형	DFB	수신기 유형	PIN
TX 전력	-1에서 + 4dBm	수신 전원	-26 ~ -1dBm
수신기 감도	- 26dBm	수신기 과부하	- 1dBm
EMC(전자기 통신)	지원	DOM	지원
작동 온도 범위	0 ~ 70 ° C	프로토콜	SFP MSA、SFF-8472

비디오

일치하는 제품

영화

신분증#

기술설명

가격

재고

장바구니에 담기

다운로드

제품 도면

PDF
LS-CWxx1G-80x.pdf

질문과 답변
질문하기

데이터가 없습니다

Q: Can DDM help us detect whether the module is approaching its temperature limit? By X***l on 2026-04-05

A: Yes. The module’s real-time DDM function can report operating temperature through compatible host equipment. Your NOC can set thresholds or monitor trends to identify abnormal temperature increases before the module reaches its rated limit. 관리자 작성 on 2026-04-06
Q: We use 1G Fibre Channel between storage systems at two locations. Can this 1410nm CWDM SFP be used for that link? C***r 작성 on 2026-01-09

A: Yes. The LS-CW411G-80C supports 1.063Gbps Fibre Channel and can be used for 1G Fibre Channel links over single-mode fiber. For a stable connection, use a matching 1410nm CWDM module at the other end. 관리자 작성 on 2026-01-10
Q: Do we need a CWDM MUX/DEMUX to use this 1410nm SFP module? W***e에 의해 on 2025-12-18

A: A CWDM MUX/DEMUX is needed when multiple CWDM wavelengths share one pair of single-mode fibers. If this is a dedicated point-to-point fiber link using only one optical channel, the 1410nm modules can normally connect directly through duplex single-mode fiber without a MUX/DEMUX. 관리자 작성 on 2025-12-19
Q: We already have duplex LC-to-LC single-mode patch cords in our network. Can we connect them directly to this 1410nm CWDM SFP? Z***n 작성 on 2025-10-23

A: Yes. The LS-CW411G-80C has a duplex LC interface and is designed for single-mode fiber. You can connect a standard duplex LC-to-LC single-mode patch cord directly to the module. Just make sure the fiber polarity is correct so the transmit and receive paths are properly matched. 관리자 작성 on 2025-10-24
Q: Can this module be inserted while the switch is running, or do we need to power it off first? Y***e 작성 on 2025-02-07

A: This module has a hot-pluggable SFP design, so it can normally be inserted or removed while the switch is powered on. After installation, wait a few seconds for the device to detect the module and check the link status. 관리자 작성 on 2025-02-08

고객 리뷰
리뷰 쓰기

{{stardata.star}}

{{comment.count}} 리뷰
5 별

{{comment.star5}}%

4 별

{{comment.star4}}%

3 별

{{comment.star3}}%

2 별

{{comment.star2}}%

1 스타

{{comment.star1}}%

모든 리뷰 ({{comment.star_num?comment.star_num:comment.count}})

모든 리뷰

별 5 개만

별 4 개만

별 3 개만

별 2 개만

별 1 개만
사진이있는 리뷰 ( {{comment.pic_comment}} )
모든 리뷰보기

데이터가 없습니다

K *** e

Sweden

구매 확인

5.0

2026-06-17

Duplex LC fit was precise and the module came right up.

57 유용한 투표 코멘트

N *** k

벨기에

구매 확인

5.0

2026-06-05

Purchased for a batch rollout of remote network cabinets. The modules have consistent labels and performance, which makes inventory handling easier. Every tested unit passed traffic and diagnostics checks.

59 유용한 투표 코멘트

E *** n

Philippines

구매 확인

5.0

2026-05-30

Good packaging, clear labeling, and the correct 1410nm wavelength arrived. We are using it with single-mode OS2 fiber and duplex LC patch leads. It has been a simple upgrade for a legacy 1G fiber path.

82 유용한 투표 코멘트

P *** h

Sweden

구매 확인

5.0

2026-04-08

Exactly what we needed for passive CWDM MUX channel expansion in Stockholm.

63 유용한 투표 코멘트

그것

Mexico

구매 확인

5.0

2026-03-18

Duplex LC snapped tight, link pulled 72km straight without external amplification.

68 유용한 투표 코멘트

D *** s

폴란드

구매 확인

5.0

2026-03-10

We deployed this CWDM 80km SFP optical module into our municipal campus fiber loop. The single-mode duplex LC interface seated securely with standard patch cords, and the switch recognized the vendor EEPROM instantly. Super smooth installation! (•‿•)

106 유용한 투표 코멘트

B *** n

Thailand

구매 확인

5.0

2026-03-01

Our operations team installed these in a remote aggregation cabinet connected over roughly 73km of SMF. The optical power levels remained comfortably within range, and there have been no link flaps so far. Nice, dependable commercial-grade optic.

112 유용한 투표 코멘트

K *** n

Danmark

구매 확인

5.0

2026-02-20

Performance has been stable on our 1G 80km single-mode fiber connection, and the DOM readings are easy to check. I gave four stars only because the shipment tracking did not update for a couple of days.

25 유용한 투표 코멘트

나를

이탈리아

구매 확인

5.0

2026-02-13

DDM made commissioning much easier — worth it.

45 유용한 투표 코멘트

F *** s

우크라이나

구매 확인

5.0

2026-01-12

We installed a pair of LS-CW411G-80C 1.25G CWDM SFP modules on an approximately 76km single-mode fiber route between a central equipment room and a remote utility site. The route includes several patch panels and a CWDM MUX/DEMUX stage, so we checked both insertion loss and DOM values before putting it into service. The 1410nm wavelength aligned correctly with our channel plan, while the reported TX and RX optical power remained within the published operating window. After a week of continuous production traffic, we saw no CRC growth, no unexpected link resets, and no noticeable optical drift.

146 유용한 투표 코멘트

T *** y

Indonesia

구매 확인

5.0

2026-01-10

Installed as part of a data room-to-warehouse connection over long single-mode fiber. The module was recognized without any configuration headache, and the LC duplex polarity was easy to verify.

103 유용한 투표 코멘트

O *** l

불가리아

구매 확인

5.0

2025-12-15

We received the correct quantity for a multi-site deployment, and every unit passed our incoming inspection. Shipping took two extra business days beyond the original estimate, so we adjusted the installation schedule slightly.

21 유용한 투표 코멘트

그

Brazil

구매 확인

5.0

2025-12-01

Clean 1410nm CWDM link at 80km, and DOM readings look spot on.

49 유용한 투표 코멘트

나의

남아프리카 공화국

구매 확인

5.0

2025-11-25

We deployed these in a municipal-style fiber ring with several CWDM wavelengths. The 1410nm channel coexists well with the rest of the plan, and the unit has held a steady 1Gbps connection. Solid performance for the price.

84 유용한 투표 코멘트

G *** h

튀르키예

구매 확인

5.0

2025-11-08

We deployed this LS-CW411G-80C 1410nm CWDM SFP on a 68km inter-building route that shares a passive CWDM backbone with several other wavelengths. Installation was simple: clean the Duplex LC connectors, confirm fiber polarity, match the 1410nm MUX port, and monitor the DOM values after link-up. The link settled quickly at 1Gbps and remained error-free through overnight replication traffic. We especially liked being able to collect temperature, voltage, Tx power, and Rx power remotely during the acceptance test. For an enterprise long-haul SMF connection, this is a reliable 80km CWDM optic.

121 유용한 투표 코멘트

N *** s

스페인

구매 확인

5.0

2025-10-11

Stable 1410nm channel performance in our CWDM MUX system.

52 유용한 투표 코멘트

나는 *** e

Ireland

구매 확인

5.0

2025-09-23

We use these modules for 1Gbps transport links supporting distributed sites and low-bandwidth cellular backhaul equipment. One advantage of this 1410nm CWDM SFP is that it lets us expand capacity over the same single-mode fiber plant without pulling another cable. During acceptance testing, the modules maintained stable links through the passive CWDM system, and optical monitoring allowed the NOC to establish baseline TX/RX levels for future troubleshooting. The Duplex LC port is convenient because it matches our standard patching practice, while the 80km rating provides useful margin for routes that may be extended later. For teams managing long optical paths, having DOM/DDM data is much better than relying on link LEDs alone.

159 유용한 투표 코멘트

S *** s

뉴질랜드

구매 확인

5.0

2025-09-06

We needed an 80km 1G SFP rather than a short-reach module because the far site is well outside our normal metro footprint. This model gave us the reach plus CWDM wavelength separation we needed. DOM is a useful bonus for ongoing maintenance.

121 유용한 투표 코멘트

같이

Singapore

구매 확인

5.0

2025-08-29

Ordered several 1G CWDM SFP 1410nm 80km modules for a campus fiber project. All units were recognized correctly, and the DDM values were helpful for checking received optical power before final handover. Good choice for a long-distance CWDM deployment.

105 유용한 투표 코멘트

P *** t

오스트리아

구매 확인

5.0

2025-08-02

Great option for extending 1G Ethernet over single-mode fiber where 1410nm is available on the CWDM multiplexer. Low effort to deploy, stable link status, and readable optical diagnostics. ^_^

128 유용한 투표 코멘트

J *** g

대한민국

구매 확인

5.0

2025-07-22

Reliable 80km CWDM SFP optical module for our single-mode fiber ring.

71 유용한 투표 코멘트

J *** s

Israel

구매 확인

5.0

2025-07-15

Our team used the LS-CW411G-80C to replace aging optics on a long campus-to-site link that was intermittently difficult to troubleshoot. The change was not about raw bandwidth — the circuit is only 1Gbps — but about restoring visibility and ensuring the correct 1410nm CWDM wavelength on the shared fiber. Once installed, DDM immediately gave us useful baseline temperature, transmit power, receive power, and supply information. The connection has remained stable during scheduled backup windows and daytime production loads. For commercial 1G CWDM applications, this SFP module offers a sensible balance of reach, diagnostics, and deployment simplicity.

137 유용한 투표 코멘트

C *** n

러시아 연방

구매 확인

5.0

2025-06-21

This 1410nm SFP optical module was a direct fit for an existing CWDM network where we needed an additional wavelength. It is compact, the latch feels solid, and the 1.25Gbps connection has been stable during normal office and backup traffic. No extra tuning needed.

98 유용한 투표 코멘트

C *** n

루마니아

구매 확인

5.0

2025-05-29

Integrated this 1410nm SFP module into an existing 8-channel passive CWDM multiplexer. Insertion loss through the MUX filter was minimal, leaving plenty of power headroom for our long-span fiber run.

77 유용한 투표 코멘트

L *** e

Netherlands

구매 확인

5.0

2025-05-11

Good optical budget for long-haul campus connectivity.

73 유용한 투표 코멘트

L *** d

헝가리

구매 확인

5.0

2025-03-27

Everything tested correctly on arrival, including the duplex LC ports and DDM monitoring. The individual packaging was secure, but the bulk box could use a little more internal padding for international deliveries.

33 유용한 투표 코멘트

F *** s

Malaysia

구매 확인

5.0

2025-03-16

Our network team likes having SFF-8472 diagnostics available on long fiber runs. With this 80km CWDM SFP module, we can watch TX/RX power and temperature remotely instead of waiting for a field visit. That alone saves time.

91 유용한 투표 코멘트

H *** l

핀란드

구매 확인

5.0

2025-02-16

For a multi-building enterprise fiber refresh, we needed a 1G SFP transceiver that could preserve available fiber pairs and work within our existing CWDM design. This 1410nm 80km SFP module was selected for one of the longer routes, then validated through switch recognition, DOM polling, sustained throughput testing, and planned failover. The DFB transmitter and PIN receiver combination delivered clean readings, and the SFF-8472 digital diagnostics were visible through our normal monitoring stack. We also verified the commercial 0–70°C range is suitable for our climate-controlled MDF and IDF spaces. It is not intended as an industrial-temperature module, but for indoor enterprise and data-room applications, it has performed exactly as expected.

132 유용한 투표 코멘트

T *** l

Norway

구매 확인

5.0

2025-01-25

We used the LS-CW411G-80C module to extend a 1G uplink between two offices on existing single-mode fiber. The 1410nm CWDM channel matched our passive MUX/DEMUX plan, and the Duplex LC connection was straightforward. The link came up immediately and has stayed stable.

93 유용한 투표 코멘트