우리를 만나 우리의 사명, 신념, 봉사 등을 알아보세요.
우리의 위치를 찾아 우리와 긴밀하게 연결하십시오.
품질 관리, 테스트, 호환성 및 글로벌 규정 준수.
연구실 견학, 광학 테스트 베드, 호환성 도구 및 테스트 요청.
주변의 최신 뉴스와 이벤트를 알아보세요. l-p.com
기술 가이드, 업계 표준 및 SFP 호환성 관련 정보를 심층적으로 살펴보세요.
자세한 제품 벤치마크 및 제품 간 비교 자료를 통해 적합한 모듈을 선택할 수 있도록 도와드립니다.
데이터 센터, 기업 및 통신 네트워크를 위한 실제 연결 솔루션을 살펴보세요.
데이터 전송 속도, 전송 거리 및 커넥터 유형 선택에 대한 필수 팁.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Operating at 1350nm on the CWDM grid, the LS-CW351G-80C SFP module delivers 1Gbps data rates and integrates a DFB laser with a PIN photodiode for SMF reach up to 80km. It operates reliably across a case temperature range of 0 to +70°C and includes real-time digital diagnostic monitoring for optical power, temperature, voltage, and bias current. The module adheres to SFP MSA and CWDM wavelength tolerances, with typical transmit optical power and receiver sensitivity specified for the full 80km link budget.
| LINK-PP 부품 번호 | LS-CW351G-80C | 공급 업체 이름 | LINK-PP |
| 폼 팩터 | SFP | 최대 데이터 속도 | 1.25Gbps |
| 파장 | 1350nm | 최대 케이블 거리 | 80km |
| 커넥터 | 이중 LC | 미디어 | SMF |
| 송신기 유형 | DFB | 수신기 유형 | PIN |
| TX 전력 | -1에서 + 4dBm | 수신 전원 | -26 ~ -1dBm |
| 수신기 감도 | - 26dBm | 수신기 과부하 | - 1dBm |
| EMC(전자기 통신) | 지원 | DDM 지원 | 가능 |
| 작동 온도 범위 | 0 ~ 70 ° C | 프로토콜 | SFP MSA、SFF-8472 |
LINK-PP LS-CW351G-80C is a commercial-grade 1350nm CWDM SFP transceiver that delivers 1Gbps data rates over single-mode fiber up to 80km. It features a duplex LC interface, digital diagnostic monitoring (DDM) for real-time operation checks, and operates within 0 to +70°C case temperature. This module combines CWDM technology with long-reach capability for efficient fiber utilization.
This optical transceiver module follows the hot-pluggable SFP footprint and is fully compliant with the SFP MSA. It allows easy installation and replacement without powering down the system. The electrical interface meets the MSA-defined pinout and signal requirements.
The 1Gbps data rate provides sufficient bandwidth for optical multiplexing backbones that aggregate multiple lower-speed links. This module serves as a cost-effective transceiver in CWDM-based backbone networks, supporting point-to-point connections over long spans.
The CWDM technology employed in this module enables multiple channels to share a single fiber by using different wavelengths. It reduces the need for additional fiber strands, thus improving fiber utilization efficiency in metro and access networks.
The 1350nm wavelength is one of the standard CWDM grid channels, allowing this module to coexist with other CWDM transceivers in the same fiber. It provides a specific transmission window with low attenuation for single-mode fiber.
The 80km transmission reach is achieved through the use of a DFB laser and a PIN photodiode with optimized sensitivity. This module can drive signals across long-distance metro rings without requiring intermediate amplification.
The duplex LC interface provides a standard and reliable physical connection for single-mode fiber patch cords. It ensures low insertion loss and easy polarity management in dense patch panels.
The DDM function continuously monitors key parameters such as Rx/Tx optical power, operating temperature, supply voltage, and laser bias current. It allows the host system to detect link degradation or fault conditions in real time, facilitating proactive maintenance.
| 영화 | 신분증# | 기술설명 | 가격 | 재고 | 장바구니에 담기 |
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} 판매United States
반송파
비용, 배송 시간 추적
회사
비용 시간
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} 협상 예정 {{shipitem.datemin}}-{{shipitem.datemax}} 일 유효한
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}