Our fiber route is about 72 km and includes patch panels and splice points. Can we use this 80km CWDM SFP module for the link?

Potentially, yes. The 80km rating is the maximum nominal transmission distance, but the total fiber loss must remain within the module’s optical budget after including fiber attenuation, connector loss, splice loss, and CWDM MUX/DEMUX insertion loss.

We already have a 1470nm CWDM module at the remote end. Can we pair it with this LS-CW451G-80C 1450nm module?

No. For a normal duplex CWDM connection, both ends should use matching 1450nm modules. A 1450nm module should not be directly paired with a 1470nm module.

Our modules are installed inside a controlled central office, but some racks run warm during peak traffic. Is the 0°C to +70°C rating based on ambient temperature or module case temperature?

The stated 0°C to +70°C specification is the operating case-temperature range. Actual module case temperature can be higher than room ambient temperature, depending on airflow, switch design, port density, and power consumption.

Our switch provides a standard 3.3V SFP power supply. Does this module need any additional power connection?

No. The LS-CW451G-80C module operates from a single +3.3V power supply through the SFP host interface and does not require an external power connection.

Miga de Pan (Breadcrumb): Inicio; Productos; Transceptores ópticos | Módulos SFP; Módulos transceptores 1/2/4G; SFP 1G CWDM/DWDM; 203226

Haga clic para abrir la vista ampliada

LINK-PP Módulo transceptor óptico LS-CW451G-80C 1G SFP CWDM 1450nm 80km Duplex LC DDM SMF

Name: LINK-PP Módulo transceptor óptico LS-CW451G-80C 1G SFP CWDM 1450nm 80km Duplex LC DDM SMF
Brand: LINK-PP
SKU: 203226
Price: 43 USD
Availability: InStock
Rating: 4.9 (27 reviews)

# 203226

Producto: LINK-PP Módulo transceptor óptico LS-CW451G-80C 1G SFP CWDM 1450nm 80km Duplex LC DDM SMF
(SKU): 203226
P / N: LS-CW451G-80C
Precio: $50
Stock: 178 en existencia
Vendido: 922
URL del producto: https://www.l-p.com/products/492692.htm

Para pedidos superiores a $1000, obtenga $15.00 de descuento. , Código: Linkpp15

Para pedidos superiores a $3000, obtenga $50.00 de descuento. , Código: Linkpp50

Para pedidos superiores a $5000, obtenga $100.00 de descuento. , Código: Linkpp100

Nuevos usuarios: Cupón de $10 para pedidos , Código: linkpp2610

: LINK-PP Módulo transceptor óptico LS-CW451G-80C 1G SFP CWDM 1450nm 80km Duplex LC DDM SMF

27 Testimonios ¿Necesitas ayuda?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

27 reseñas

4 Preguntas

Solicitar stock

922 Vendido

$ 50

Envío gratuito a partir de $600. Si necesita un precio más favorable, contáctenos directamente.

Cant. (Piezas):

Precio unitario :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

Fabricar: LINK-PP

P / N: LS-CW451G-80C

Compatible:: Cisco; LINK-PP; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Longitud de onda:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Envío

Ser negociado

Envío Rápido

No puedo entregar

a Estados Unidos vía {{now_chooseship?now_chooseship.name:''}}

Tiempo de entrega estimado : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} día. Ver más detalles

Garantía de 5 años Devoluciones 30-Dias Intercambio de 30 días

Disponible:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}.

Cantidad:

( La orden mínima {{detail_data.prodInfo.minimum_ordered_quantity}} )

imposible de entregar

Precio Total:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Agregar al deseo

Especificaciones

Especificación
Videos
Productos a juego
Descargar
Q&A
Reseñas

LINK-PP Especificaciones del módulo SFP LS-CW451G-80C de 1G

LS-CW451G-80C comes as a 1450nm CWDM SFP module with support for data rates of up to 1.25Gbps. Built with a DFB laser and PIN photodiode, it delivers transmission over SMF distances of up to 80km and operates within a 0 to +70°C temperature range. Real-time digital diagnostic monitoring enables continuous monitoring of essential module parameters and operating status.

LINK-PP Número de refacción	LS-CW451G-80C	Nombre del vendedor	LINK-PP
Factor de forma	SFP	Velocidad de datos máxima	1.25Gbps
Longitud de onda	1450nm	Distancia máxima del cable	80km
Conector	LC dúplex	Medios	SMF
Tipo de transmisor	DFB	Tipo de receptor	Código Postal
Poder TX	-1 a + 4dBm	Potencia RX	-26 a -1dBm
Sensibilidad del receptor	-26dBm	receptor de sobrecarga	-1dBm
EMC (comunicación electromagnética)	Soportado	DDM	Soportado
Rango de temperatura de funcionamiento	0 a 70 ° C	Protocolos	SFP MSA, SFF-8472

Videos

Productos a juego

Fotos

NÚMERO DE LA TARJETA DE IDENTIDA

Mareas Ideales para Lecciones

Precio

Stock

Añadir al Carrito

Descargar

Dibujo de producto

PDF
LS-CWxx1G-80x.pdf

Preguntas y Respuestas
¿Alguna pregunta?

No hay datos

Q: Our fiber route is about 72 km and includes patch panels and splice points. Can we use this 80km CWDM SFP module for the link? Por Q***e on 2026-03-10

A: Potentially, yes. The 80km rating is the maximum nominal transmission distance, but the total fiber loss must remain within the module’s optical budget after including fiber attenuation, connector loss, splice loss, and CWDM MUX/DEMUX insertion loss. Por admin on 2026-03-11
Q: We already have a 1470nm CWDM module at the remote end. Can we pair it with this LS-CW451G-80C 1450nm module? Por R***k on 2026-01-21

A: No. For a normal duplex CWDM connection, both ends should use matching 1450nm modules. A 1450nm module should not be directly paired with a 1470nm module. Por admin on 2026-01-22
Q: Our modules are installed inside a controlled central office, but some racks run warm during peak traffic. Is the 0°C to +70°C rating based on ambient temperature or module case temperature? Por P***g on 2025-06-29

A: The stated 0°C to +70°C specification is the operating case-temperature range. Actual module case temperature can be higher than room ambient temperature, depending on airflow, switch design, port density, and power consumption. Por admin on 2025-06-30
Q: Our switch provides a standard 3.3V SFP power supply. Does this module need any additional power connection? Por S***n on 2025-05-19

A: No. The LS-CW451G-80C module operates from a single +3.3V power supply through the SFP host interface and does not require an external power connection. Por admin on 2025-05-20

Más

Reseñas
Escribe tu Opinión

{{stardata.star}}

{{comment.count}} Reseñas
5 estrellas

{{comment.star5}}%

4 estrellas

{{comment.star4}}%

3 estrellas

{{comment.star3}}%

2 estrellas

{{comment.star2}}%

1 estrellas

{{comment.star1}}%

todos los comentarios ({{comment.star_num?comment.star_num:comment.count}})

todos los comentarios

5 estrellas solamente

4 estrellas solamente

3 estrellas solamente

2 estrellas solamente

1 estrellas solamente
Reseñas con imágenes ( {{comment.pic_comment}} )
Ver todas las críticas

No hay datos

V *** y

Suecia

Compra verificada

5 .0

2026-05-25

Good fit for a long-distance enterprise network where we still have active 1GbE access switches. The 1G SFP format saved us from replacing working equipment while adding another CWDM wavelength to the existing SMF pair.

90 Voto útil Comentarios

N *** r

Sudáfrica

Compra verificada

5 .0

2026-04-22

We needed 1450nm CWDM modules specifically, not a generic 1310nm long-reach SFP. This module matched our CWDM channel plan, delivered a stable 1.25G connection, and fit our duplex LC patching setup perfectly.

61 Voto útil Comentarios

L *** n

Canada

Compra verificada

5 .0

2026-04-03

Good optical budget for our long campus backbone.

51 Voto útil Comentarios

India

Compra verificada

5 .0

2026-03-30

Hot-swapped into our aggregation rack without a single glitch or port flap. (•‿•)

66 Voto útil Comentarios

L *** t

New Zealand

Compra verificada

5 .0

2026-03-09

Installed as part of a multi-vendor switch refresh where legacy access equipment still relies on standard SFP ports. We provided the required host coding information before ordering, and the modules were delivered ready for our planned device profile. On a 57km single-mode fiber link, the 1.25Gbps port negotiated normally and stayed stable through traffic tests. The Duplex LC interface was convenient because the field plant already used LC patch panels, and DOM helped quickly identify one dirty connector during installation.

99 Voto útil Comentarios

S *** x

Norway

Compra verificada

5 .0

2026-02-27

A practical option for a 1G backbone over single-mode fiber. Our techs like that it is a standard duplex LC SFP, so there is no special handling beyond checking polarity and cleaning the connectors.

85 Voto útil Comentarios

J *** k

Reino Unido

Compra verificada

5 .0

2026-01-22

Solid 1G CWDM SFP for an 80km single-mode fiber run.

50 Voto útil Comentarios

C *** p

Finlandia

Compra verificada

4 .0

2026-01-08

The 80km CWDM 1G SFP itself tested well, linked quickly, and the 1450nm channel matched our fiber plan. One carton arrived with a slightly crushed outer corner, although the anti-static packaging and modules inside were fine.

23 Voto útil Comentarios

Q *** h

Federación Rusa

Compra verificada

5 .0

2026-01-04

The module works well for long-haul 1G Ethernet transport where a 1450nm CWDM channel is needed. Vendor coding was handled before shipment, which made the rollout much faster for our operations team.

103 Voto útil Comentarios

W *** s

Netherlands

Compra verificada

5 .0

2025-12-21

Ordered these 1G SFP modules for a CWDM MUX/DEMUX upgrade where the 1450nm channel was already assigned in the fiber plan. The modules came up quickly, and DDM monitoring lets our NOC keep an eye on transmit power, receive power, temperature, and supply voltage.

132 Voto útil Comentarios

I *** k

Polonia

Compra verificada

5 .0

2025-12-08

Our data-center team used this 1G 1450nm CWDM SFP module to carry management and storage-related traffic between facilities over single-mode fiber. It is not intended to turn a 1G port into 10G, but for legacy Gigabit interfaces it gives a clean, cost-conscious way to use a long CWDM span. The standard SFP MSA form factor seated properly, and the SFF-8472 DOM data integrated into our normal monitoring workflow.

159 Voto útil Comentarios

Nordeste

Australia

Compra verificada

5 .0

2025-11-19

Duplex LC connection, 1450nm channel, zero drama.

74 Voto útil Comentarios

Malaysia

Compra verificada

5 .0

2025-11-11

We deployed 18 units of the LS-CW451G-80C in a municipal campus network connecting branch buildings to a central data room. The longest fiber section was just under 73km after splice and patch-panel losses, so we selected the 80km CWDM 1G SFP to retain reasonable margin. Initial DDM readings showed TX around the expected range and receiver levels comfortably above the sensitivity threshold. After several weeks, interface counters remain clean with no observed packet loss or CRC growth.

134 Voto útil Comentarios

T *** s

Italia

Compra verificada

5 .0

2025-10-29

These 1450nm CWDM SFP transceivers were purchased for a multi-site fiber ring. Each unit was recognized correctly, and the SFF-8472 digital diagnostics were useful during commissioning. No CRC errors so far.

128 Voto útil Comentarios

D *** y

Rumania

Compra verificada

4 .0

2025-09-21

Performance is good on our 68km SMF route, and the DDM values look normal after installation. Shipping took a little longer than expected for a small replacement order, but the optical modules were properly labeled and worked on arrival.

37 Voto útil Comentarios

X *** n

República de Corea

Compra verificada

5 .0

2025-09-09

We used this LS-CW451G-80C 1450nm CWDM SFP to extend a 1G link between two campus buildings. The 80km rating gave us plenty of optical margin on our much shorter single-mode fiber route, and the duplex LC connector made replacement straightforward.

84 Voto útil Comentarios

Alemania

Compra verificada

5 .0

2025-08-14

Installed cleanly and linked immediately on our 1450nm CWDM fiber path.

59 Voto útil Comentarios

Thailand

Compra verificada

5 .0

2025-08-04

Nice balance of price and performance for a commercial-grade 1G CWDM SFP. It is especially useful when upgrading fiber capacity is more practical than pulling another cable.

86 Voto útil Comentarios

O *** y

Brazil

Compra verificada

5 .0

2025-07-28

Perfect 1450nm CWDM grid channel pass-through on our passive 8-channel mux.

63 Voto útil Comentarios

K *** n

Bélgica

Compra verificada

5 .0

2025-07-19

We evaluated a pair on a long enterprise fiber route that includes multiple fusion splices, distribution frames, and CWDM passive components. The 1450nm channel passed traffic continuously during a 72-hour soak test, while optical diagnostics remained consistent with the calculated loss budget. The -26dBm receiver sensitivity is useful for these longer links, although we still recommend validating actual attenuation and keeping appropriate engineering margin. This is a good commercial-temperature 80km CWDM SFP for indoor network cabinets and managed backbone sites.

144 Voto útil Comentarios

R *** r

Singapore

Compra verificada

5 .0

2025-06-18

We installed a batch in an indoor equipment room for separate CWDM channels over one fiber route. The optical power values stayed within expected limits, and the modules have been stable through normal HVAC temperature swings.

71 Voto útil Comentarios

J *** y

Austria

Compra verificada

5 .0

2025-05-14

This was purchased for a 1G base-station backhaul extension where available fiber was limited and the wavelength plan could not be changed. The module’s 1450nm CWDM wavelength allowed us to add capacity without deploying additional fiber pairs. We monitored DOM values during peak utilization and saw no abnormal drift in transmit or receive levels. The unit is commercial-grade rather than industrial temperature rated, so we installed it inside a conditioned enclosure as planned; for that environment, performance has been excellent.

132 Voto útil Comentarios

K *** k

Francia

Compra verificada

5 .0

2025-05-09

DOM readings are stable and easy to verify from the switch CLI.

62 Voto útil Comentarios

Utah

España

Compra verificada

5 .0

2025-04-01

We tested the module on a remote telecom shelter link and got a stable connection with clean diagnostic values. The DFB transmitter and PIN receiver combination works well for this type of 80km CWDM deployment.

78 Voto útil Comentarios

P *** k

Philippines

Compra verificada

5 .0

2025-03-24

Great module for point-to-point Gigabit links where trenching new fiber wasn't an option. Adding this 1450nm wavelength channel into our existing CWDM filter allowed us to spin up a dedicated backup link across 68km. Solid optical link stability over 30 days of continuous traffic.

137 Voto útil Comentarios

S.M

Mexico

Compra verificada

5 .0

2025-02-11

Reliable CWDM 1G SFP module for remote-site connectivity.

58 Voto útil Comentarios

M *** h

Indonesia

Compra verificada

5 .0

2025-01-08

Our operations team used these modules in a CWDM transport overlay for several 1GbE aggregation links. The key requirement was a 1450nm DFB CWDM transmitter compatible with our existing passive MUX/DEMUX channel map, plus readable SFF-8472 diagnostics. During acceptance testing, we checked temperature, voltage, laser bias, TX power, and RX power on both ends; the readings were consistent across the shipment. For commercial indoor racks operating within 0–70°C, this has been a dependable long-distance 1G SFP optical transceiver.

151 Voto útil Comentarios