Las categorías
Módulos SFP
Servicios
Soporte
Sobre Nosotros
Recursos
Ocúpese de sus negocios con una variedad de opciones de pago confiables.
Utilice el número de pedido o el número de seguimiento para verificar el estado del envío.
Obtenga su cotización rápidamente y le ofreceremos un servicio más profesional.
Ayude a administrar mejor su presupuesto y gastos.
Soporte de muestras gratuitas, obtenga los resultados de sus pruebas de manera eficiente.
Soporte y servicio de equipo profesional, para resolver sus problemas a tiempo.
Pregúntanos lo que necesites, te ayudaremos 24/7.
Obtenga su cotización rápidamente y ofrézcale un servicio más profesional.
Conócenos y conoce nuestra misión, creencia, servicio y más.
Encuentre nuestras ubicaciones y conéctese con nosotros de cerca.
Gestión de calidad, pruebas, compatibilidad y cumplimiento global.
Visita al laboratorio, banco de pruebas ópticas, herramienta de compatibilidad y solicitudes de pruebas.
Descubra las últimas noticias y eventos alrededor l-p.com
Profundice en guías técnicas, estándares de la industria y conocimientos de compatibilidad SFP.
Comparaciones detalladas de productos y puntos de referencia para ayudarlo a elegir el módulo adecuado.
Explore soluciones de conectividad del mundo real para centros de datos, empresas y redes de telecomunicaciones.
Consejos esenciales para elegir velocidades de datos, distancias de transmisión y tipos de conectores.
¿Eres cliente nuevo? Crea una cuenta.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Operating at 1350nm on the CWDM grid, the LS-CW351G-80C SFP module delivers 1Gbps data rates and integrates a DFB laser with a PIN photodiode for SMF reach up to 80km. It operates reliably across a case temperature range of 0 to +70°C and includes real-time digital diagnostic monitoring for optical power, temperature, voltage, and bias current. The module adheres to SFP MSA and CWDM wavelength tolerances, with typical transmit optical power and receiver sensitivity specified for the full 80km link budget.
| LINK-PP Número de refacción | LS-CW351G-80C | Nombre del vendedor | LINK-PP |
| Factor de forma | SFP | Velocidad de datos máxima | 1.25Gbps |
| Longitud de onda | 1350nm | Distancia máxima del cable | 80km |
| Conector | LC dúplex | Medios | SMF |
| Tipo de transmisor | DFB | Tipo de receptor | Código Postal |
| Poder TX | -1 a + 4dBm | Potencia RX | -26 a -1dBm |
| Sensibilidad del receptor | -26dBm | receptor de sobrecarga | -1dBm |
| EMC (comunicación electromagnética) | Soportado | Soporte DDM | Sí: |
| Rango de temperatura de funcionamiento | 0 a 70 ° C | Protocolos | SFP MSA, SFF-8472 |
LINK-PP LS-CW351G-80C is a commercial-grade 1350nm CWDM SFP transceiver that delivers 1Gbps data rates over single-mode fiber up to 80km. It features a duplex LC interface, digital diagnostic monitoring (DDM) for real-time operation checks, and operates within 0 to +70°C case temperature. This module combines CWDM technology with long-reach capability for efficient fiber utilization.
This optical transceiver module follows the hot-pluggable SFP footprint and is fully compliant with the SFP MSA. It allows easy installation and replacement without powering down the system. The electrical interface meets the MSA-defined pinout and signal requirements.
The 1Gbps data rate provides sufficient bandwidth for optical multiplexing backbones that aggregate multiple lower-speed links. This module serves as a cost-effective transceiver in CWDM-based backbone networks, supporting point-to-point connections over long spans.
The CWDM technology employed in this module enables multiple channels to share a single fiber by using different wavelengths. It reduces the need for additional fiber strands, thus improving fiber utilization efficiency in metro and access networks.
The 1350nm wavelength is one of the standard CWDM grid channels, allowing this module to coexist with other CWDM transceivers in the same fiber. It provides a specific transmission window with low attenuation for single-mode fiber.
The 80km transmission reach is achieved through the use of a DFB laser and a PIN photodiode with optimized sensitivity. This module can drive signals across long-distance metro rings without requiring intermediate amplification.
The duplex LC interface provides a standard and reliable physical connection for single-mode fiber patch cords. It ensures low insertion loss and easy polarity management in dense patch panels.
The DDM function continuously monitors key parameters such as Rx/Tx optical power, operating temperature, supply voltage, and laser bias current. It allows the host system to detect link degradation or fault conditions in real time, facilitating proactive maintenance.
| Fotos | NÚMERO DE LA TARJETA DE IDENTIDA | Mareas Ideales para Lecciones | Precio | Stock | Añadir al Carrito |
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} VendidoEstados Unidos
Portador
Seguimiento de costos y plazos de entrega
Empresa
Costo Tiempo
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Ser negociado {{shipitem.datemin}}-{{shipitem.datemax}} días Disponible
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}