무료 배송: $ 99.00+ (송수신기 및 케이지) $ 600.00+ (기타 제품). 대량 구매 또는 맞춤 가격 문의는 직접 연락주시기 바랍니다.
도움이 필요하신가요?
우리와 실시간으로 채팅하세요
라이브 채팅
전화를 하시겠습니까?

+ 86-752-3386717

Korea · 한국어 · KRW
  • 신뢰할 수 있는 다양한 결제 옵션으로 귀하의 비즈니스에 주의를 기울이세요.

  • 배송 상태를 확인하려면 주문 번호 또는 추적 번호를 사용하세요.

  • 빠르게 견적을 받아보고 더욱 전문적인 서비스를 제공받으세요.

  • 예산과 지출을 더 잘 관리할 수 있도록 도와주세요.

  • 무료 샘플 지원으로 테스트 결과를 효율적으로 얻을 수 있습니다.

  • 전문적인 팀 지원 및 서비스로 귀하의 문제를 적시에 해결해 드립니다.

  • 궁금한 점이 있으면 무엇이든 물어보세요. 24시간 연중무휴 도와드리겠습니다.

  • 신속하게 견적을 받고 보다 전문적인 서비스를 제공하세요.

  • 기술 가이드, 업계 표준 및 SFP 호환성 관련 정보를 심층적으로 살펴보세요.

  • 자세한 제품 벤치마크 및 제품 간 비교 자료를 통해 적합한 모듈을 선택할 수 있도록 도와드립니다.

  • 데이터 센터, 기업 및 통신 네트워크를 위한 실제 연결 솔루션을 살펴보세요.

  • 데이터 전송 속도, 전송 거리 및 커넥터 유형 선택에 대한 필수 팁.

통화를 선택하십시오
USD-미국 달러
EUR - 유로
GBP - 영국 파운드
CAD - 캐나다 달러
AUD - 호주 달러
JPY - 일본 엔
SEK-스웨덴 크로나
NOK-노르웨이 크로네
IDR - 인도네시아 루피아
BRL-브라질 헤알
THB - 태국 바트
LS-DAC1110-1MN 1m (3ft) 10g sfp+ to sfp+ passive copper twinax cable
확장 된보기를 열려면 클릭하십시오

LINK-PP LS-DAC1110-1MN 1m(3ft) 10G SFP+-SFP+ 패시브 구리 트윈액스 케이블

제품 개요

프로덕트
LINK-PP LS-DAC1110-1MN 1m(3ft) 10G SFP+-SFP+ 패시브 구리 트윈액스 케이블
SKU
227905
P / N
LS-DAC1110-1MN
가격
₩ 12
재고
560 재고
판매
941
단가 $ 12.00
신규 사용자: $ 10.00 첫 주문 시 쿠폰 제공
암호 linkpp2610
주문 금액 초과 시 $ 1,000.00 돈을 받아가세요 $ 15.00 떨어져서
암호 Linkpp15
주문 금액 초과 시 $ 3,000.00 돈을 받아가세요 $ 50.00 떨어져서
암호 Linkpp50
주문 금액 초과 시 $ 5,000.00 돈을 받아가세요 $ 100.00 떨어져서
암호 Linkpp100
제조: LINK-PPP / N : LS-DAC1110-1MNSKU : 227905

LINK-PP 실물데이터시트모든 다운로드

볼륨 가격 온라인 구매 옵션 · 대량 구매 또는 맞춤 가격 문의
$ 12.00
1~99개
$ 11.40
100~999개
$ 11.04
1,000~2,999개
$ 10.68
3,000~5,999개
$ 10.32
≥6,000 PC

이 수량보다 더 많은 수량이 필요하시거나 가격 협상을 원하시나요?

주식 :
560 재고
배송:
$ 17.92
에 Korea 를 통해 페덱스 IP
예상 배달 시간 : 3 - 6 일.
5 - 년 보증 15- 일 반품 15일 교환
품질 보증
  • 업계 최고 수준의 5년 보증을 제공합니다.
  • 표를 읽어보세요 세부사항 논의 모든 제품의 보증.
반품 및 교환
  • 환불은 반품된 상품을 수령한 후 영업일 기준 약 5일 이내에 처리됩니다.
  • 재고가 있는 교체품은 영업일 기준 1일 이내에 배송 가능합니다.
  • 전체 반품 정책을 읽어보세요. 세부사항 논의.
무료 배송 $ 99.00.
또는 결제 시 UPS/FedEx/DHL 계정을 사용하여 배송할 수도 있습니다.$ 0.00 해운).
수량:
총 가격:
$ 12.00

LINK-PP LS-DAC1110-1MN 1m(3ft) 10G SFP+ 직접 연결 구리 케이블(1미터, 패시브, SFP+-SFP+, 30AWG)

The LINK-PP LS-DAC1110-1MN 10G SFP+ 다이렉트 어태치 케이블은 SFF-8431, SFF-8432 및 SFF-8472 규격을 준수합니다. 30AWG부터 24AWG까지 다양한 전선 굵기와 최대 7m까지 다양한 길이 옵션을 제공합니다. 이 10G SFP+ 구리 케이블은 데이터 센터 내 랙 내부 또는 인접한 랙 간에 10기가비트 단거리 연결을 구축하는 데 비용 효율적인 솔루션을 제공합니다.

LINK-PP 부품 번호 LS-DAC1110-1MN 공급 업체 이름 LINK-PP
커넥터 타입 SFP +에서 SFP +로 최대 데이터 속도 10.3125Gbps
케이블 길이 1m (3ft) 케이블 유형 패시브 트윈액스
최소 굽힘 반경
23mm 와이어 AWG
30AWG
미디어 구리 전원 공급 장치 3.3V
자켓 소재 PVC(OFNR) 작동 온도 범위 0 ~ 70 ° C
프로토콜 1x InfiniBand QDR, DDR, SDR, 10기가비트 이더넷, 파이버 채널 어플리케이션 10G 이더넷

모델 비교표

LINK-PP

일치하는 제품

영화 신분증# 기술설명 가격 재고 장바구니에 담기

다운로드

제품 도면 LS-DAC1110-xxN.pdf

질문과 답변

아직 질문이 없습니다.

제품 사양, 호환성 또는 납기일에 대해 가장 먼저 문의하세요.

질문하기
  • A:
    At 1m, FEC is not needed for signal integrity and most 10G ports do not enable it by default. Enabling it adds a small amount of latency and is generally unnecessary at this length. The exception is if your platform requires FEC for a specific port mode or if you are aggregating with links that already use it. In that case consistency across the bundle matters more than the individual cable length, so match the setting to the rest of the group. by LINK-PP 기술 지원
  • A:
    The assembly is rated 0 to 70℃, so 60℃ internal is within the rating but leaves only 10℃ of margin. The connector shell temperature will be higher than ambient because it sits against the switch cage, which is itself a heat source. In an outdoor enclosure I would measure the actual cage temperature rather than the air temperature before committing. If the cage runs above about 65℃, consider an industrial rated assembly or move the switch to a cooler part of the enclosure. by LINK-PP 기술 지원
  • A:
    Cost, power and simplicity. Copper removes two transceivers per link, which cuts the bill of materials substantially, removes the heat those optics generate, and eliminates a class of failure related to module firmware and coding. The trade off is distance: copper is limited to a few metres while fibre can go much further. At 1m inside a cabinet, copper is almost always the better engineering choice unless you have a specific reason to keep the link optical. by LINK-PP 기술 지원
  • A:
    Start with the connector, not the cable. A partially seated SFP+ latch will cause intermittent loss that looks like a cable fault. Reseat both ends and confirm the latch clicks. If that does not fix it, swap the cable to a known good port to separate a port problem from a cable problem. After that, check whether the port has any error counters climbing, and whether the flap correlates with someone working in the cabinet. Physical disturbance is the most common cause of flaps on passive copper that was previously stable. by LINK-PP 기술 지원

고객 리뷰

  • 4.9

    리뷰 19 개

  • 5 별
    95%
    4 별
    5%
    3 별
    0%
    2 별
    0%
    1 스타
    0%
데이터가 없습니다
E *** n
Canada
확인 된 구매
5.0
2026-06-06
Ran a 10G iperf test between two hosts on these and got line rate with no retransmits, which is what you want from a passive assembly.
S *** k
튀르키예
확인 된 구매
5.0
2026-03-15
I compared the cost against buying SFP+ optics and patch cords for the same forty links. The copper came out at roughly a third of the price, with no transceiver to fail and no fibre cleaning to worry about. The only trade off is distance, and at 1m that is not a trade off at all. Payback was immediate.
T *** s
Philippines
확인 된 구매
5.0
2026-01-12
The connector latches are the metal tab type and they release cleanly. On cheaper cables the plastic tab snaps after a few dozen insertions.
N *** n
Australia
확인 된 구매
5.0
2025-12-03
This is the length we use for top of rack to the first server U. One metre leaves a small service loop without coiling excess behind the rail.
R *** s
Singapore
확인 된 구매
5.0
2025-11-11
We ordered forty for a floor refresh. Delivery came in two boxes, both labelled with the part number and length, which made goods in easy.
확인 된 구매
.0
상영 본문

By 

리뷰가 아직 없습니다.

이 제품 사용 경험을 가장 먼저 공유해 보세요.

리뷰 쓰기
|
판매