Will this 1270nm SFP integrate seamlessly into our existing 18-channel CWDM MUX/DEMUX chassis using duplex LC patch cords?

Yes. The transceiver strictly adheres to ITU-T G.694.2 CWDM grid specifications and features a standard duplex LC interface. Its optical launch power and high-sensitivity PIN receiver provide sufficient power budget to pass cleanly through passive single-mode MUX/DEMUX filters with minimal insertion loss penalties.

Is it possible to deploy this 1270nm CWDM SFP over legacy multimode fiber for a short intra-building run?

No. The LS-CW271G-80C CWDM module is built specifically for single-mode Fiber. Running it over multimode fiber introduces severe modal dispersion and high optical coupling loss.

How does long-term, unpowered storage in sub-zero winter warehouse conditions affect this commercial-grade 1G SFP module?

The module handles sub-zero warehouse conditions without issue. While active operating limits are 0°C to 70°C, the non-operating storage rating spans -40°C to 85°C, making unpowered cold storage completely safe.

Does this 1270nm module support Fibre Channel traffic alongside standard Ethernet across our shared metro fiber ring?

Yes. The transceiver natively supports both 1.063Gbps Fibre Channel and 1.25Gbps Gigabit Ethernet, allowing you to run storage area network (SAN) traffic across the 1270nm multiplexed CWDM channel.

Breadcrumb: Home; Products; Optics Transceivers | SFP Modules; 1/2/4G Transceiver Modules; 1G CWDM/DWDM SFP; 224973

Click to open expanded view

Generic CW-SFP1G80-27 Compatible LINK-PP 1G SFP CWDM 1270nm 80km Duplex LC DDM SMF Optical Transceiver Module

Name: Generic CW-SFP1G80-27 Compatible LINK-PP 1G SFP CWDM 1270nm 80km Duplex LC DDM SMF Optical Transceiver Module
Brand: LINK-PP
SKU: 224973
Price: 41.28 USD
Availability: InStock
Rating: 4.9 (17 reviews)

Product: Generic CW-SFP1G80-27 Compatible LINK-PP 1G SFP CWDM 1270nm 80km Duplex LC DDM SMF Optical Transceiver Module
SKU: 224973
P/N: LS-CW271G-80C
Price: $ 48
Stock: 153 in Stock
Sold: 551
Product URL: https://www.l-p.com/products/497629.htm

For Order Over $1000 Get $15.00 Off , Code: Linkpp15

For Order Over $3000 Get $50.00 Off , Code: Linkpp50

For Order Over $5000 Get $100.00 Off , Code: Linkpp100

New Users: $10 Coupon for Orders , Code: linkpp2610

17 Reviews

4 Questions

551 Sold

$ 48

Free shipping over $600, If you need a more favorable price, please contact us directly.

Qty (pcs) :

Unit Price :

$ 48

100

$ 45.6

1000

$ 44.16

3000

$ 42.72

6000

$ 41.28

Manufacture: LINK-PP P/N: LS-CW271G-80C SKU: 224973

Compatible:: Cisco; LINK-PP; Arista; Brocade; Ciena; Dell; Extreme; FS; Generic; Juniper; Netgear

Wavelength:: 1270nm; 1310nm; 1330nm; 1350nm

Shipping:

To Be Negotiated

Free Shipping

Can't deliver

to United States via {{now_chooseship?now_chooseship.name:''}}

Estimated delivery time : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} days.

5-Year Warranty 30-Day Returns 30-Day Exchange

Stock:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantity:

( Min. Order {{detail_data.prodInfo.minimum_ordered_quantity}} )

undeliverable

Total Price:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Specifications

Specification
Matching Products
Download
Q&A
Customer Reviews

Generic CW-SFP1G80-27 Compatible LINK-PP 1G SFP Specifications

CW-SFP1G80-27 CWDM SFP module provides 1Gbps data rate over a 1270nm CWDM wavelength, built with a DFB laser and PIN receiver, and achieves an 80km link budget on single-mode fiber. It incorporates real-time DDM functionality covering Tx/Rx power, supply voltage, bias current, and temperature. The standard operating temperature range is 0 to +70°C.

Generic Part Number	CW-SFP1G80-27	Vendor Name	LINK-PP
Form Factor	SFP	Max Data Rate	1.25Gbps
Wavelength	1270nm	Max Cable Distance	80km
Connector	Duplex LC	Media	SMF
Transmitter Type	DFB	Receiver Type	PIN
TX Power	-1 to +4dBm	RX Power	-26 to -1dBm
Receiver Sensitivity	-26dBm	Receiver Overload	-1dBm
EMC (Electromagnetic Compatibility)	Supported	DDM Support	Yes
Operating Temperature Range	0 to 70°C	Protocols	SFP MSA、SFF-8472

Matching Products

Pictures

ID#

Description

Price

Stock

Add to Cart

Download

Product Drawing

PDF
LS-CWxx1G-80x.pdf

Questions & Answers
Ask a Question

No data

Q: Will this 1270nm SFP integrate seamlessly into our existing 18-channel CWDM MUX/DEMUX chassis using duplex LC patch cords? By C***s on 2026-03-20

A: Yes. The transceiver strictly adheres to ITU-T G.694.2 CWDM grid specifications and features a standard duplex LC interface. Its optical launch power and high-sensitivity PIN receiver provide sufficient power budget to pass cleanly through passive single-mode MUX/DEMUX filters with minimal insertion loss penalties. By admin on 2026-03-21
Q: Is it possible to deploy this 1270nm CWDM SFP over legacy multimode fiber for a short intra-building run? By B***h on 2026-01-04

A: No. The LS-CW271G-80C CWDM module is built specifically for single-mode Fiber. Running it over multimode fiber introduces severe modal dispersion and high optical coupling loss. By admin on 2026-01-05
Q: How does long-term, unpowered storage in sub-zero winter warehouse conditions affect this commercial-grade 1G SFP module? By A***r on 2025-06-29

A: The module handles sub-zero warehouse conditions without issue. While active operating limits are 0°C to 70°C, the non-operating storage rating spans -40°C to 85°C, making unpowered cold storage completely safe. By admin on 2025-06-30
Q: Does this 1270nm module support Fibre Channel traffic alongside standard Ethernet across our shared metro fiber ring? By A***s on 2025-05-18

A: Yes. The transceiver natively supports both 1.063Gbps Fibre Channel and 1.25Gbps Gigabit Ethernet, allowing you to run storage area network (SAN) traffic across the 1270nm multiplexed CWDM channel. By admin on 2025-05-19

Customer Reviews
Write a Review

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

All Reviews ({{comment.star_num?comment.star_num:comment.count}})

All Reviews

5 stars only

4 stars only

3 stars only

2 stars only

1 star only
Reviews with Pictures ( {{comment.pic_comment}} )
See All Reviews

No data

B***h

Ireland

Verified Purchase

5 .0

2026-06-08

We rolled out these optics across several regional sites to standardize our 1G CWDM 1270nm channel and simplify spares logistics. The uniform behavior across locations makes capacity planning and troubleshooting much easier. DDM data flows cleanly into our dashboards, letting us spot fiber degradation early. Field technicians find the modules easy to handle and replace, with no special procedures required. The result is a more predictable network with lower operational overhead.

103 Helpful vote Comments

G***g

Singapore

Verified Purchase

5 .0

2026-05-25

Low TX power, good RX sensitivity — perfect for long campus runs.

70 Helpful vote Comments

C***s

Belgium

Verified Purchase

5 .0

2026-04-22

We used this 1270nm CWDM 80km SFP transceiver to connect two university research hubs across town over single-mode fiber. Latency is negligible and MSA compliance made it fully plug-and-play with our optical core switch.

81 Helpful vote Comments

I***h

Sweden

Verified Purchase

5 .0

2026-03-30

Clean duplex LC latching and exact 1270nm grid alignment. Will order more spares! (•‿•)

56 Helpful vote Comments

F***n

Thailand

Verified Purchase

5 .0

2026-02-27

Used in a campus upgrade: 1270nm CWDM 1G SFP over existing SMF patch panels. No compatibility issues, DDM shows real-time optical power, and the BER stays solid.

100 Helpful vote Comments

E***s

Malaysia

Verified Purchase

5 .0

2026-01-04

We replaced legacy optical transceivers with these 1270nm CWDM units to free up spectrum. The 80km SMF reach is accurate, and the DDM data helps us validate fiber health remotely. No packet loss during failover tests.

109 Helpful vote Comments

E***r

Turkey

Verified Purchase

5 .0

2025-12-08

During a campus network refresh, we replaced legacy optics with these 1270nm CWDM modules to align with our multiplexer grid. Every port came up cleanly on first insert, and the switches recognized the transceivers without custom coding. Real-time optical diagnostics feed neatly into our NMS, making it easy to validate link health remotely. The modules run cool in dense chassis and maintain steady performance under variable load. We’ve since standardized this module for all new 1G CWDM 1270nm deployments. Excellent fit for structured fiber designs and future-proof channel planning.

159 Helpful vote Comments

J***e

Republic of Korea

Verified Purchase

5 .0

2025-11-19

Plugged this 1270nm CWDM optic into our distribution switch, link came up instantly across a 62km dark fiber span.

46 Helpful vote Comments

C***y

Austria

Verified Purchase

5 .0

2025-11-11

Purchased these 1G CWDM modules for a regional cell tower backhaul project. The optical link budget easily cut through our patch panel insertion losses without needing optical amplification. Highly recommended!

92 Helpful vote Comments

H***r

Italy

Verified Purchase

5 .0

2025-09-09

Installed 20 units of these CWDM modules in our aggregation node; clean EEPROM identification and rock-solid 1.25Gbps throughput.

84 Helpful vote Comments

A***s

Romania

Verified Purchase

5 .0

2025-07-19

Matched this 1270nm SFP module with our 1310nm/1550nm CWDM channels on the same fiber pair. Zero crosstalk issues and clean wavelength separation. A very economical way to multiply fiber capacity.

85 Helpful vote Comments

Q***e

Denmark

Verified Purchase

4 .0

2025-05-07

These 1G SFP optical transceivers perform great — 1270nm CWDM, 80km SMF, DDM all spot-on. Only nit: one module’s label was slightly crooked, but functionality is perfect.

31 Helpful vote Comments

F***t

Philippines

Verified Purchase

5 .0

2024-12-08

We needed a cost-effective 1.25Gbps CWDM option for point-to-point links. These modules hit the spec: TX -1 to +4 dBm, RX sensitivity -26 dBm, and stable operation at 0–70°C. Pairing with our CWDM MUX was seamless.

124 Helpful vote Comments

I***r

Spain

Verified Purchase

5 .0

2024-11-19

High-sensitivity PIN receiver easily handled our 68km inter-site fiber run.

78 Helpful vote Comments

D***r

Hungary

Verified Purchase

5 .0

2024-11-11

We incorporated these 1G CWDM 1270nm modules into a testbed for next-generation backhaul designs and ran them through extensive stress scenarios. The links held steady under bursty traffic, route changes, and simulated fiber events. DDM telemetry remained consistent, making it easy to correlate optical events with network alarms. The standard Duplex LC interface kept the test setup aligned with our production cabling. This module now anchors our reference architecture for 1G CWDM 1270nm segments. Highly suitable for labs, pilots, and production rollouts alike.

130 Helpful vote Comments

D***h

Indonesia

Verified Purchase

5 .0

2024-11-05

Ordered a batch for a multi-site LTE backhaul refresh. The 1G SFP CWDM 1270nm 80km spec fits our design, and the modules interoperate cleanly with our CWDM multiplexers. Support was responsive on lead times.

97 Helpful vote Comments

H***y

Norway

Verified Purchase

5 .0

2024-10-02

Standard commercial temp rating, runs cool inside our telco rack, excellent duplex SMF performance.

92 Helpful vote Comments