주요 플랫폼용 OEM 코딩 광학 모듈
케이지 및 구리 광학 장치를 위한 엄선된 앨범 페이지
우리를 만나 우리의 사명, 신념, 봉사 등을 알아보세요.
우리의 위치를 찾아 우리와 긴밀하게 연결하십시오.
품질 관리, 테스트, 호환성 및 글로벌 규정 준수.
주변의 최신 뉴스와 이벤트를 알아보세요. l-p.com
기술 가이드, 업계 표준 및 SFP 호환성 관련 정보를 심층적으로 살펴보세요.
자세한 제품 벤치마크 및 제품 간 비교 자료를 통해 적합한 모듈을 선택할 수 있도록 도와드립니다.
데이터 센터, 기업 및 통신 네트워크를 위한 실제 연결 솔루션을 살펴보세요.
데이터 전송 속도, 전송 거리 및 커넥터 유형 선택에 대한 필수 팁.
시스코 DWDM-SFP10G-35.04 호환 LINK-PP module is a premium 10G DWDM SFP+ transceiver engineered for dense wavelength division multiplexing systems. Integrating a Cooled EML laser and PIN photodiode, it supports Max 10.7Gbps data rates. Operating reliably on ITU channel 53, this commercial-grade optical module delivers exceptional network performance while maintaining strict SFP+ MSA compliance.
| 시스코 부품 번호 | DWDM-SFP10G-35.04 | 공급 업체 이름 | LINK-PP |
| 폼 팩터 | SFP + | 최대 데이터 속도 | 10.7Gbps |
| 파장 | 1535.04nm | 최대 케이블 거리 | 40km |
| 커넥터 | 이중 LC | 미디어 | SMF |
| 송신기 유형 | EML | 수신기 유형 | PIN |
| TX 전력 | -1에서 + 2dBm | 수신 전원 | -16 ~ -1dBm |
| DDM/돔 | 지원 | 수신기 감도 | - 15.5dBm |
| 작동 온도 범위 | 0 ° C ~ + 70 ° C | 프로토콜 | SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431 |
Explore the primary advantages of the Cisco DWDM-SFP10G-35.04 Compatible LINK-PP optical transceiver. Optimized for 10Gbps network environments, this hot-pluggable module utilizes a single 3.3V power supply. It delivers cost-effective, high-capacity fiber communication, ensuring seamless plug-and-play integration for critical enterprise and telecom infrastructures.
시스코 DWDM-SFP10G-35.04 호환 LINK-PP functions as a highly reliable 10G SFP+ optical module for modern data networking. Fully compliant with SFF-8472 MSA standards, it guarantees superior 10Gbps transmission, offering low latency and maximum stability for enterprise networks.
Elevate your city-wide infrastructure with the DWDM-SFP10G-35.04 transceiver. Specifically designed for Metropolitan Area Networks, it provides reliable 10G connectivity between distant urban locations, seamlessly routing high-speed data while preventing bandwidth bottlenecks during peak operational hours.
Maximize your optical fiber utilization using the DWDM-SFP10G-35.04 transceiver featuring advanced DWDM technology. By transmitting multiple signal channels simultaneously over a single fiber pair, this 10G SFP+ module exponentially increases network capacity without requiring expensive recabling.
Operating flawlessly on the 1535.04nm wavelength at 195.3 THz, the DWDM-SFP10G-35.04 aligns perfectly with ITU channel 53. This precise C-band DWDM frequency ensures excellent signal integrity and effectively eliminates crosstalk in dense wavelength multiplexed systems.
Engineered for extended reach, the DWDM-SFP10G-35.04 easily supports 40km transmission distances over standard single-mode fiber. The robust Cooled EML transmitter and PIN receiver guarantee pristine 10G optical data links without the need for additional signal amplification.
The hot-swappable DWDM-SFP10G-35.04 includes a standard duplex LC interface for secure optical connectivity. This universally recognized receptacle ensures broad compatibility with standard fiber patch cables, enabling rapid installations and effortless maintenance within complex network infrastructures.
Maintain complete control over your network health through the DWDM-SFP10G-35.04 module's built-in Digital Optical Monitoring capabilities. Administrators can track vital real-time metrics including temperature, laser bias current, and optical power to ensure continuous system reliability.
호환성 테스트 완료 LINK-PP 랩. 테스트 보고서 보기
시스코 DWDM-SFP10G-35.04 호환 LINK-PP 10G SFP+ completely satisfies rigorous international certification standards, ensuring maximum operational safety and environmental sustainability for all global telecommunications network deployments.
Each DWDM-SFP10G-35.04 optical transceiver undergoes an intensive quality testing program. We rigorously simulate extreme data traffic to guarantee absolutely flawless 10Gbps transmission before reaching our customers.
Reflecting superior manufacturing excellence, the DWDM-SFP10G-35.04 holds critical quality certifications including CE, FCC, UKCA, UL, and REACH, verifying its safe operation and environmentally compliant material composition.
The DWDM-SFP10G-35.04 is thoroughly certified to guarantee outstanding host-device compatibility. It integrates seamlessly into major OEM switches and routers, preventing connection errors and hardware restrictions.
모든 10G SFP+ 트랜시버는 지속적인 성능, 물리적 내구성 및 완벽한 오류 없는 광섬유 네트워크 통신을 보장하기 위해 고급 진단 평가를 거칩니다.
1535.04nm DWDM 파장의 안정성을 정확하게 검증하고 탁월한 측면 모드 억제 성능을 보장합니다.
10Gbps 신호 선명도를 검사하여 타이밍 지터를 최소화하면서 완벽한 데이터 전송을 보장합니다.
패킷 손실 없이 장시간 동안 10G 데이터 스트림이 완벽하게 작동하는 것을 확인했습니다.
Guarantees the commercial-grade DWDM-SFP10G-35.04 transceiver operates safely between 0°C and +70°C ambient environments.
저희는 Cisco DWDM-SFP10G-35.04 호환성을 보장합니다. LINK-PP 10G SFP+ is securely packaged and rapidly dispatched, guaranteeing your networking equipment arrives in perfect working condition.
모든 송수신기는 고급 정전기 방전 차폐 백에 꼼꼼하게 밀봉됩니다.
두꺼운 폼층이 충격 진동을 흡수하여 섬세한 내부 기계적 손상을 방지합니다.
최적화된 창고 운영을 통해 광학 모듈을 즉시 배송할 수 있습니다.
신뢰할 수 있고 배송 추적이 가능한 세계 최고 수준의 글로벌 택배 회사와 제휴하고 있습니다.
Cisco DWDM-SFP10G-35.04 호환 모듈 배포 LINK-PP module is effortlessly simple. Insert the hot-swappable module into a compatible SFP+ switch port, connect your duplex LC single-mode fiber, and immediately activate a stable 10Gbps DWDM connection without requiring complex network configurations.
LINK-PP 원활한 네트워크 운영을 보장하기 위해 사전 판매 상담, 호환성 검증 및 배포 후 문제 해결을 포함한 전문적인 기술 지원을 제공합니다.
전문적인 기술 지침을 통해 고객이 네트워크 아키텍처 및 애플리케이션 요구 사항에 따라 가장 적합한 DWDM-SFP10G-35.04 모듈을 선택할 수 있도록 지원합니다.
시스코 스위치 및 기타 지원되는 네트워킹 플랫폼과의 원활한 작동을 보장하기 위한 호환성 검사 및 검증.
안정적이고 정확한 작동을 보장하기 위해 설치, 구성 및 초기 배포에 대한 단계별 지원을 제공합니다.
제품 수명 주기 전반에 걸쳐 지속적인 기술 지원을 제공하여 기업 및 통신 사업자급 네트워크에서 안정적인 성능을 보장합니다.
LINK-PP 광 모듈의 원활한 설치와 안정적인 작동을 위한 사후 지원을 제공합니다.
15일 이내 이유 불문 반품 및 환불 가능
초기 보증 기간 내에 불량품(DOA) 또는 결함이 있는 제품은 무료로 교체해 드립니다.
보증 기간 동안 제조상의 결함에 대한 무료 수리 서비스를 제공합니다.
보증 제외 사항 및 조건이 적용됩니다.
![]() LS-DW5310-A0C
| ![]() LS-DW5810-A0C
| ![]() LS-DW5710-A0C
| ![]() LS-DW5610-A0C
| ![]() LS-DW5510-A0C
|
|---|
지원 | 시스코 | 시스코 | 시스코 | 시스코 | 시스코 | 시스코 |
데이터 속도(최대) | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps |
파장 | 1535.04nm | 1535.04nm | 1531.12nm | 1531.89nm | 1532.68nm | 1533.46nm |
커넥터 | 이중 LC | 이중 LC | 이중 LC | 이중 LC | 이중 LC | 이중 LC |
케이블 거리(최대) | 40km | 100km | 100km | 100km | 100km | 100km |
케이블 유형 | SMF | SMF | SMF | SMF | SMF | SMF |
TX 전력 | -1에서 + 2dBm | -1에서 + 5dBm | -1에서 + 5dBm | -1에서 + 5dBm | -1에서 + 5dBm | -1에서 + 5dBm |
수신기 감도 | - 15.5dBm | - 23dBm | - 23dBm | - 23dBm | - 23dBm | - 23dBm |
작동 온도 | 0 ° C ~ + 70 ° C | 0 ~ 70 ° C | 0 ~ 70 ° C | 0 ~ 70 ° C | 0 ~ 70 ° C | 0 ~ 70 ° C |
공급 업체 이름 | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP |
시스코 부품 번호 | DWDM-SFP10G-35.04 | DW-SFP10G100-53 | DW-SFP10G100-58 | DW-SFP10G100-57 | DW-SFP10G100-56 | DW-SFP10G100-55 |
온도 | 상업 보험
| 상업 보험
| 상업 보험
| 상업 보험
| 상업 보험
| 상업 보험
|
폼 팩터 | SFP + | SFP + | SFP + | SFP + | SFP + | SFP + |
송신기 유형 | EML | EML | EML | EML | EML | EML |
수신기 유형 | PIN | APD | APD | APD | APD | APD |
DDM/돔 | 지원 | 지원 | 지원 | 지원 | 지원 | 지원 |
프로토콜 | SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431 | SFP+ MSA 호환 | SFP+ MSA 호환 | SFP+ MSA 호환 | SFP+ MSA 호환 | SFP+ MSA 호환 |
| 영화 | 신분증# | 기술설명 | 가격 | 재고 | 장바구니에 담기 |
질문: LS-DW5310-40C는 SFF-8472 디지털 진단, SFP+ MSA 및 CPRI/eCPRI 프로토콜을 준수합니까? (Z***m 작성)
A: 네, LS-DW5310-40C는 SFP+ MSA, SFF-8472(실시간 DOM 텔레메트리), SFF-8431, 10GBASE-DWDM 및 10.7Gbps CPRI/eCPRI 표준은 물론 RoHS 및 Class I 레이저 안전 기준을 100% 준수합니다. (관리자 작성)
질문: LS-DW5310-40C(C53 1535.04nm)는 Brocade 및 Ciena 스위치에서 원활하게 작동하고 기존 100GHz DWDM 패시브 멀티플렉서와 깔끔하게 동기화될까요? (작성자: C***r)
A: 네, LS-DW5310-40C는 Brocade, Ciena, Cisco 및 HPE 하드웨어와의 플러그 앤 플레이 호환성을 고려하여 설계되었으며, 냉각식 EML 레이저는 모든 표준 100GHz ITU-T DWDM 멀티플렉서/디멀티플렉서와 호환되는 1535.04nm(C53)의 좁은 스펙트럼을 출력합니다. (관리자 작성)
질문: 시스템 통합업체가 LS-DW5310-40C DWDM 트랜시버를 50대 이상 구매할 경우 특별 B2B 가격을 제공하시나요? (M***s님)
A: 네, 시스템 통합업체, VAR(부가가치 재판매업체) 및 기업 구매자는 20대, 50대, 100대 이상 구매 시 상당한 대량 할인 혜택을 받습니다. LS-DW5310-40C 및 기타 DWDM 채널에 대한 도매 가격 상담은 영업팀에 문의하십시오. (관리자 작성)
질문: LS-DW5310-40C는 듀플렉스 LC 커넥터가 있는 OS2 싱글모드 광섬유를 사용해야 합니까? (K***i 님 질문)
A: 네, LS-DW5310-40C는 듀플렉스 LC 광 포트를 사용하며, UPC 폴리싱 커넥터를 통해 최대 40km까지 전송할 수 있도록 9/125µm OS2 단일 모드 광섬유(SMF)용으로 설계되었습니다. (관리자 작성)
질문: LS-DW5310-40C를 옥외 가로등 박스에 사용할 수 있나요? 아니면 -40°C ~ +85°C의 넓은 온도 범위에서 사용 가능한 산업용 버전을 주문해야 하나요? (M***n 작성)
A: 가로등 배전반에 내부 온도를 0°C ~ +70°C로 유지하는 능동형 온도 조절 장치가 설치되어 있다면 표준형 LS-DW5310-40C가 적합합니다. 난방이나 냉방 시설이 없는 옥외 배전반의 경우, 산업용 광범위 온도 조절형 LS-DW5310-40I(-40°C ~ +85°C)를 요청하십시오. (관리자 작성)
Korea
반송파
비용, 배송 시간 추적
회사
비용 시간
가격 협의 가능